Advertising Disclosure
10 Best mks board in Canada
Best Choice01Yoidesu3D Printer Controller Board,MKS GEN L V1.0 Controller Board with USB Cable Relacement Compatible Ramps1.4,Support TMC2100 8825 Driver, LCD2004 LCD12864
Main highlights- 【Advantage-5】Use CH340 serial port chip, more easily install the drive than 16U2. Stable and filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
- 【Advantage-4】2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Reserve external driver , available to connect external high-current driver to drive the 57 and 86 stepper motors. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
- 【Advantage-3】Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
- 【Advantage-2】Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.
- 【Advantage-1】Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage. Use high-quality MOSFET, better cooling effect and more stable.
9.7Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02BIGTREETECH
BIGTREETECH SKR Mini E3 V3.0 Control Board with TMC2209 UART Stepper Driver New Upgrade 32Bit 3D Printer Silent Board for Ender 3, Ender3 Pro, Ender-3 V2 3D Printer
Free ShippingMain highlights- USB Micro B: The PC communication USB interface is upgraded from Mini USB to Micro USB B, which is more adaptable
- Three CNC Fan: Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working
- Output Power Supply: Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals
- Main Control Chip: Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6
- Increased Heat Sink: Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance
9.6Exceptional
Show more
Value for Money03AcogedorMKS Gen L V2.1 3D Printer Control Board, Compatible with TMC2209, TMC2208, TFT35 V3.0, TFT35 E3, BL Touch, LCD12684, for Ramps 1.4, 1.5, 1.6
Free Shipping9.5Excellent
- 04Clisted
Clisted MKS EMMC 32G Memory Expansion Card+MKS EMMC-Adapter V2 USB 3.0 Card Reader for Neptune 4/4 Pro/4 Plus/4 MAX
Main highlights- MKS EMMC-ADAPTER V2: USB interface: USB 3.0. Applicable motherboard: For MKS EMMC module, Micro-SD TF card
- MKS EMMC V1.0: Purpose: To store klipper image files. Advantages: large memory, faster storage speed, more stable than TF card
9.4Excellent
Show more
- 05KIMISS
MKS Robin Nano V3.1 3D Printer Controller Board - Compact, UserFriendly, and High Performance for All Your 3D Printing Needs (#1)
Main highlights- Schottky Diode A Schottky diode made using the principle of metal semiconductor junction formed by metal semiconductor is added to the temperature measurement circuit and MOS circuit, which makes the switching frequency high and the forward voltage lower, which can make the operator more comfortable during
- Schottky Diode A Schottky diode made using the principle of metal semiconductor junction formed by metal semiconductor is added to the temperature measurement circuit and MOS circuit, which makes the switching frequency high and the forward voltage lower, which can make the operator more comfortable during
- Schottky Diode A Schottky diode made using the principle of metal semiconductor junction formed by metal semiconductor is added to the temperature measurement circuit and MOS circuit, which makes the switching frequency high and the forward voltage lower, which can make the operator more comfortable during
- Anti-interference performance The motherboard of the 3D printer has anti-interference ability, which will make the mac more stable and make the working process more efficient.
- Anti-interference performance The motherboard of the 3D printer has anti-interference ability, which will make the mac more stable and make the working process more efficient.
9.3Excellent
Show more
- 06Hyuduo
3D Printer Motherboard ESP32 240MHz MCU 520Kb 3D Printer Main Control Board for MKS TinyBee MINI12864,Convenient 2 Way Controllable Fan 3D Printer Controllers Accessories
Free ShippingMain highlights- and Bluetooth Module: 3D printer motherboard adopts ESP32 ROOM 32U module, embedded dual core 32 bit high speed MCU, clock up to 240MHz, and integrated , Bluetooth module, the performance is very powerful.
- Support Serial Screen: The 3D printer control board supports for MKS TFT serial screen. It can update firmware via USB, connect to and web page to control printing.stable and performance, practical, easy to operate and use, has a long service life.
- Memory Chip: In addition, the module has a built in 8Mbyte flash memory chip to provide effective for more application scenarios.The professional design makes it super easy for installation,you are worth trying.
- Applicable Models: Our ESP32 3D printer motherboard for MKS TinyBee MINI12864 is a good replacement part for old and broken parts. It only takes a few simple steps to complete the work.
- Adapted Firmware: This is a 3D printer main control board with ESP32 on board, supports for Marlin2.0 firmware, supports for MKS MINI12864V3 in addition to the common LCD2004,12864 screen.any questions regarding it,don't hesitate to email us, we will try our best to solve it for you as soon as possible.
9.1Excellent
Show more
- 07Hyuduo
3D Printer Control Board MKS DLC32 V2.1 32 Bit Control Board with 2.4 Inch TS24 R V2.1 Touch Screen Engraving Machine Main Board
Main highlights- Super Wide Compatibility: This motherboard allows for quick engraving and web control, mobile app control, etc. The for MKS DLC32 has mounting holes and board size compatible with the for MKS DLC and can also be used with for GRBLaser and for LightBurn PC software.
- High Accuracy: This 3D printer touch screen is able to work highly with the machine controller, thus providing high accuracy printing operation and printing excellent and stable products.
- Built In 8M Byte Flash Memory Chip: This 3D printer motherboard has a built in 8M byte flash memory chip to enhance product's quality and provide effective for more application scenarios.
- 32 Bit Processor: This motherboard has high performance, and it is equipped with a 32 bit STM32 processor, support storage card storage, expandable module, power failure relay module, break material detection switches and external card slot.
- 2.4 Inch TS24 R V2.1 Touch Screen: This touch screen provides a clear readout that simplifies the user's operation process, with a clear UI interface that intuitively presents the desired functions for easy operatio.The 3D printer control board coexists of stylish appearance and excellent performances.
8.9Very Good
Show more
- 08Fafeicy
Fafeicy 3D Printer Main Control Board with ESP32 and 240MHz MCU for MKS TinyBee MINI12864
Free ShippingMain highlights- Supports for Marlin2.0 firmware and MKS MINI12864V3 LCD screen
- Supports MKS TFT serial screen and firmware updates via USB
- Suitable replacement part for old or broken boards
- Integrated ESP32 ROOM 32U module with powerful performance
- Built-in 8Mbyte flash memory chip for effective
8.8Very Good
Show more
- 09Diyeeni
3D Printer MKS Gen-L V1.0 Controller Board, MKS Integrated Mainboard Motherboard Compatible with Ramps1.4, Supports TMC2100 8825 Driver, LCD2004 LCD12864 TFT28 TFT32
8.7Very Good
- 10Tissting
EMMC 32G Module Memory Expansion Card, 3D Printer Embedded Storage Board Compatible with KLP1(210/230)/KP3S PRO V2/Qidi MAX3/Qidi Plus3 Neptune 4/4 Pro/4 Plus4 MAX 3D Printers
Main highlights- Usage: EMMC 32G module memory expansion card store klipper image files. With smoother edges and a finish, this printer memory expansion module can withstand high temperatures up to 300 degrees, ensuring a long-lasting and performance
- Product Name: MKS EMMC-32G Embedded Storage Module. boasting large memory and storage speed, leading to stable and efficient printing results
- Compatible: This Embedded Storage Module is compatible with KLP1(210/230)/KP3S PRO V2/Qidi MAX3/Qidi Plus3 Neptune 4/4 Pro/4 Plus4 MAX 3D printers. ensuring easy installation and usage
- Advantages: EMMC 32G module memory expansion card Large memory, storage speed, and more stable than TF cards. 24.3x18.6x1.9mm, only 1.9g weight. Store klipper image files
- 32G large memory, storage speed, and more stable than TF cards. The well-processed silicone sleeve edges of this expansion board provide a secure and stable storage solution, with smoother outer walls for added confidence in usage
8.6Very Good
Show more
