Advertising Disclosure
10 Best vfd drives in Canada
Best Choice01HY HUANYANGVector Control CNC VFD Variable Frequency Drive Motor Drive Inverter Converter 220V 7.5KW 10HP for Spindle Motor Speed Control HUANYANG GT-Series (220V, 7.5KW)
Free ShippingMain highlights- The VFD has the advantages of low noise and low electromagnetic interference
- The VFD can run 3-phase motor with 200-230V AC single-phase or three phase input
- Supports mcah3 function and RS-485 communication//Supports remote potentiometer speed control and remote switch start/stop
- Support fast brake resistance installation
- Support DPS vector control
- Low failure rate/Designed to be non-flammable
- Easy to connect the motor/easy to use
- Achieved CE listed
- 1 Year replace .If there is an error code in the product and you do not know how to operate, please contact the seller
9.7Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02ATO.COM
ATO 110V Input VFD Variable Frequency Drive, 110V Input 220V Output VFD, 1hp Single Phase to 1 Phase or 3 Phase VFD, for AC Motor Speed Control( 1hp 0.75kW)
Free ShippingMain highlights- 【VOLTAGE& FREQUENCY】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz
- 【NOTE】The first step, please set "FE-00=0", after setting, the VFD will work as a normal frequency inverter, at this time the vfd can access AC power to work, so be sure to set "FE-00=0"(Please refer to the VFD quick setting or user manual)
- 【FUNCTION】ATO 120V input VFD inverter, with automatic energy save running, Automatic voltage regulation (AVR), Automatic current limiting function
- 【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h
- 【APPLICATION】ATO 110V input 220V output VFD Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
- ATO 1hp 110V VFD, 0.75 kW single phase 110V/120V input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD
9.6Exceptional
Show more
- 03SZCY LLC
AC 220V/1.5KW Variable Frequency Drive with 2M Cord, 8A VFD Inverter Frequency Converter for Spindle Motor Speed Control (Single-Phase Input, 3 Phase Output)
Free ShippingMain highlights- Type: 1.5Kw 220V VFD; Input Voltage: 220V(+/-15%); Output Voltage: 220VAC; Input Frequency: 50/60Hz; Output Frequency: 0~400Hz; Rated current: 8A; Input Phase: 1 phase; Output Phase: 3 phase; Capacity: 4.0KVA(1.5KW/2HP); Adapter motor power: 1.5KW.
- Multiple Protection: VFD Speed Controller is over current, over voltage, over heat, overload, under voltage, intelligent power module protection.
- Low Noise: By optimizing PWM control technology and electromagnetic compatibility, the variable frequency drive single phase satisfies users' requirement of low noise, low electromagnetic interference.
- Easy Installation: Simple to operate and wire. Fast start and stop response, large torque at low speed.
- Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!
9.5Excellent
Show more
Value for Money04VEVORVEVOR VFD 5HP, 4KW, 18A, 1 Phase 220V-240V Input to 3 Phase 220V-240V Output Variable Frequency Drive, 0-400Hz VFD for AC Motor Speed Control
26% Off Free ShippingMain highlights- Variable Frequency Drive
9.4Excellent
Show more
- 05SZCY LLC
AC 220V/2.2KW Variable Frequency Drive, 12A VFD Inverter Frequency Converter for Spindle Motor Speed Control (Single-Phase Input, 3 Phase Output)
Free ShippingMain highlights- The operator panel can be moved out and extended by 2M, 1.5M, 1M, 30CM. 1 Year replace or refund!!!
- The machine is screwed to ensure the safety and reliability of the use. Three anti-paint protection lines, improve and extend the life of the fuselage.
- Spacing 2.54mm bar connector, 5-pin plug. DC cooling fan low noise, large air volume.
- Input voltage: 220V(+/-15%); Output voltage: 220VAC; Input frequency: 50/60 Hz; Output frequency: 0-400 Hz; Input phase: 1 phase; Output phase: 3 phase.
- Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!
9.2Excellent
Show more
- 06Mollom
MOLLOM VFD 1.5KW 2HP 5.1A 220V Single or Three Phase Input to 3 Phase 0-3000 Hz Output Variable Frequency Drive Control Inverter for Spindle Motor CNC Speed Control
Free ShippingMain highlights- 【Smart Digital Display】 Adopting user-friendly keyboard design & reasonable layout, easy to operate; digital display, intuitive and clear. The detachable design is convenient for remote control
- 【Importent Note】 This VFD does not surpport external resistor. If your motor is heavy load, pls choose a higher power level VFD or contact sales for model selection suggestion.The working environment is relatively humid, with water mist, water droplets or metal objects falling in, which will cause a short circuit
- 【High Performance】Power: 1.5kw; Input voltage: AC 220V(±15%); Output voltage: AC 220V; Input frequency: 50/60 Hz; Output frequency: 0-3000 Hz; Input phase: Both Support Single or Three phase; Output phase: three-phase
- 【Feature】Rich of digital and analogy control terminals for versitile control ，RS485 communication port, adopting standard international MODBUS main circuit control.With extremely strong anti-jamming capability, safe for you to use
- 【Application Motor】CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
- ***The frequency converter needs to be directly connected to the motor, and the start and stop of the motor must be controlled by the frequency converter, otherwise the frequency converter will be damaged
9.1Excellent
Show more
- 07Marhynchus
Variable Frequency Inverter 2.2KW VFD Single-Phase 110V to Three-Phase 220V Spindle Motor Speed Control Frequency Converter
Main highlights- Variable Frequency Drive: The inverter is a device used to adjust the speed of the motor, it has high torsion and wide speed regulation. The speed governor is equipped with a digital display, with clear readings and convenient parameter setting.
- Multi Protection: This variable frequency inverter has multi protection such as over current, over voltage and under voltage, module failure, over heat, short circuit, etc, and provide low electromagnetic interference.
- Easy To Wire: The frequency converter is easy to use and wire. It would be more convenient to connect to wires with screw terminals.
- Applications: The frequency inverter has single‑phase input and 3‑phase output, and is suitable for 3‑phase motors with a voltage of 220V. It is used to control the start, stop, speed adjustment and forward and reverse rotation of the motor.
- Applications: The frequency inverter has single‑phase input and 3‑phase output, and is suitable for 3‑phase motors with a voltage of 220V. It is used to control the start, stop, speed adjustment and forward and reverse rotation of the motor.
9.0Excellent
Show more
- 08HY HUANYANG
VFD 220V 2.2KW 3hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series
Main highlights- The VFD has the advantages of low noise and low electromagnetic interference
- The VFD can run 3-phase motor with 200-230V AC single-phase or three phase input
- Supports remote potentiometer speed control and remote switch start/stop
- Supports mcah3 function and RS-485 communication
- Small size & light weight
- Low failure rate/Designed to be non-flammable
- Easy to connect the motor/easy to use
- Achieved CE listed
- 1 Year replace .If there is an error code in the product and you do not know how to operate, please contact the seller
8.9Very Good
Show more
- 09Tangxi
Single Phase Drive Inverter Variable Frequency Drive PAM Controller 110V 0.75KW 7A for 3-Phase Motor(-0.75KW)
Free ShippingMain highlights- 【Parameters】Power: 0.75KW. Input: Single Phase 110V. Hertz: 50Hz. Output: Three-Phase 110V. Current: 7A. Control Mode: V/F Close Loop. Output Voltage Regulation Mode: PAM Control.
- 【Multiple Advantages】Manufactured with high-quality electronic components, with strong anti-interference ability and stable and performance. There is enough space for heat dissipation between electronic components and shell adopts porous heat dissipation, which has longer service life. Simple to operate and wire, fast start and stop response.
- 【Frequency Converter to Convert】The Frequency Converter can convert single-phase current input into three-phase current output.
- ????【Wide Applications】Widely used in various types of automatic control equipment, such as: pump control , constant pressure water supply, engraving machine, printing machinery, packaging equipment, fan speed regulation, etc.
- ????【To Provide You with Services!!!】If you encounter problems, please feel to us, we will help you within 24 hours. If you encounter product quality or need to return it, please us as soon as possible, thank you for your support!
8.6Very Good
Show more
- 10VEVOR
VEVOR VFD 1HP, 0.75KW, 3.5A, 1 or 3 Phase 220V Input to 3 Phase 220V Output Variable Frequency Drive, 40-60Hz Input, 0-400Hz Output VFD for Spindle Motor CNC Speed Control
Free ShippingMain highlights- Stay Cool, Stay Safe: The variable frequency drive ensures rapid cooling during extended use with its multi-sided and multi-hole design, promoting optimal ventilation while maintaining low noise operation.
- Safety & Durability Redefined: The VFD stands out with a comprehensive protection system, safeguarding against overcurrent, overload, overvoltage, phase loss, and more. These features prioritize your safety and enhance the longevity of the VFD.
- Master of Versatility: Our VFD is ideal for driving three-phase motors in diverse machinery, including CNC routers, CNC machines, milling machines, drilling machines, compressors, pumps, grinders, elevators, centrifuges, and other speed control machines. For heavier motor loads, please choose a higher-powered VFD for best results.
- Key Parameters: Power: 0.75KW, Horsepower: 1HP, Input Current: 3.5A. Input Phase: Single-phase 220V or Three-phase 220V ; Output Phase: Three-phase 220V. Input Frequency: 40-60Hz ; Output Frequency: 0-400Hz.
- Intuitive Display and Button: Our variable frequency drive (VFD) features an intuitive display and easy-to-use buttons, allowing users to get started quickly. The detachable panel can be connected to the corresponding interface for remote control, providing added convenience and flexibility.
8.5Good
Show more
