Advertising Disclosure
10 Best Utp Cable Testers - Holiday Sale
Best Choice01HenkionMultifunction RJ45 Network Caber Tester, UTP Cable Tester Ethernet Cable Tracer,4" IPS Touch Screen Support Network Tools, Digital Multi-Meter,VFL,OPM,POE++ Detect,RJ45 TDR,Cable Length,NCV (LT-600S)
Main highlights- 【Upgrade Network Cable Tester&Cable Tracer】Advanced UTP cable test,test UTP cable's sequence,type and remote kit,quickly detect the near-end,mid-end and far-end fault point of RJ45 cable connector.Digital signal ethernet cable tracer can quickly find out the target cable(BNC cable,network cable and telephone cable and other various metal) from the mess cables.Decisively rejects noise and false signals,RJ45 tracer and UTP at the same interface,accurately locate the cables to avoid misjudgment.
- 【RJ45 TDR Cable Test & Length Measurement】Cable tester is eaily to test cable’s pair status, length, attenuation reflectivity, impedance, skew, and other parameters. Also, you can measure opens of network cables, max measurement length up to 3000 meters. Creating test report.
- 【POE++ Detect/Network Tools】Rj45 POE Tester supports IEEE802.3BT/AT/AF and non-standard protocol detection. Displays power supply voltage, power supply pins, and pin polarity. Furthermore, network tester built-in 1000M network port, A bunch of network tools, such as IP discovery, IP address scan, PING test, LLDP/CDP detection, Port flashing, PPPOE dial-up.
- 【PD Power Detection & NCV Detection & FTP】PD power test can detect whether the power output of the POE switch is normal, and detect the pins used for power supply. Inductive NCV scan function. Sound and light dual alarms, supporting the distinction between live and neutral wires. The FTP function enables users to copy test report and data via network FTP.
- 【DMM/OPM/VFL】Multifunciton cable tester built-in digital multi-meter, optical power meter and visual fault location. Intelligent digital multimeter, auto-ranging voltage/ resistance/ continuity measurement with isolation protection. Optical power meter--It is used for signal power test and insertion loss test of various equipment and photoelectric components. VFL--the position of optical fiber fault point can be easily and accurately determined.
- 【Battery & Service】4 inch IPS touch screen, 800*480 resolution. The emitter and receiver both built-in rechargeable battery, (max 3.7V 4000mAh lithium-ion.)Powerful battery life and you don't need to replace the batteries. Of cause,We will do our best to provide the best service we can, so you don't need to worry about anything.
9.9Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02NOYAFA
NOYAFA Network Cable Tester with Optical Power Meter VFL, CAT5 CAT6 Cable Toner Ethernet Cable Tester, RJ11 RJ45 Network Tester for Telephone, Ethernet, Video, PoE Tester Wire Tracer Fiber Tester
Free ShippingMain highlights- PoE Testing: PoE testing can check cable mapping polarity and voltage of PoE network switches, withstand 60VDC. Automatically detects and switches between 10M/100M/1000M modes. Includes cable tracking, short circuit test, interruption of circuit test and etc
- Optical power Meter Test & Port Flashing: Connect the network cable to be tested to the transmitter, the wire tracker will automatically detect the optical fiber frequency and the port indicator will flash on the same screen, which can display the working speed of the port, which is convenient for accurately locating the line and port.
- Multifunctional Network Cable Tester: There are nine features to meet your needs. Continuity testing, cable scan, port flash, length measurement, POE Power Supply Test, QC testing, optical power meter, VFL function, and NVC function.
- Long Battery Life + Type-C Charging: Built-in 1500mah 3.7V lithium battery, running time of 10 hours, Type-C charging is more convenient. The flashlight solves the trouble of working in the dark
- Cable Length Test: The RJ45 cable tester can quickly measure the length of the cable with a range of 200m. Not only network cables, but also phone lines and BNC cables.
- Anti-interference Network Cable Tester: Adopt advanced digital/analog/POE mode, high sensitivity, less noise interference, easy to accurately locate the target cable, widely used in engineering wiring, network and equipment maintenance
9.7Exceptional
Show more
- 03NOYAFA
NOYAFA NF-8209S Network Cable Tester, Ethernet Cable Tester with CAT5, CAT6 Line Tracer, PoE, NCV, Length Test, Port Flashing, Fault Line Scan for Cable Grooming, LAN Network Cable Tracer Kit
Free ShippingMain highlights- 【Rechargeable Lithium Battery】 NOYAFA MF-8209S Ethernet cable tester has a built-in 1400 mAh rechargeable lithium battery, providing long-lasting battery life. It also supports USB-C charging, which is convenient for long-term use. In addition. If you have any questions about the product or need feedback, please feel free to contact us
- 【RJ45 Network Cable Tester】 NF-8209S RJ45 Network Cable Tester can detect shorts, breaks, crossed pairs and other faults in RJ45, CAT5, CAT5E, CAT6, CAT6A, RJ12, RJ11, CAT7 and CAT8 cables. NCV function can easily locate network ports, suitable for line search, underground telephone line detection and home network maintenance. A must-have tool for network technicians
- 【Port Flashing】NF-8209S network line tracer locates the network port by flashing the port indicator on the hub/switch and the flashing hub to quickly locate the network cable on the switch/router. It can be used for 10M/100M/1000M hub/switch, and adds a compression function test to test whether the crystal head is compressed
- 【POE, NCV test】NF-8209S wire tracer tester determines which pins are powered and detects voltage, determines PSE type according to AF standard, detects the presence of AC voltage (50V-1000V), and tests the physical status of STP and UTP network cables
- 【Multi-function Design】Noyafa nf-8209s multi-function network cable tester combines POE cable tester, CONT, power function, line voltage detection, line tracing, loopback test and LED lighting. Equipped with RJ45 remote interface. Suitable for cat5 tester/cat6 tester CAT5/5e CAT6/6A cable tracer, underground telephone line finder, home maintenance, achieving multi-purpose and portability to meet your testing needs
- 【Digital Cable Scan】NOYAFA NF-8209S ethernet cable tester kit (LAN cable tester) is a new generation of network tone generator and probe, which can provide AC filter and analog signal. It has three cable tracing modes to choose from: normal mode/anti-interference mode/PoE mode
- 【Cable Length Test and LED Light】NOYAFA MF-8209S network cable tester supports LED light, you can turn on the lighting in low-light or dark environments. It can accurately measure the cable length without calibration, the measuring range is 1-600 meters, the length measurement accuracy is up to 99%, and detect cable crossover, short circuit and break
9.6Exceptional
Show more
Value for Money04VCELINKVCELINK Network Cable Tester, RJ45 Ethernet Cable Tester for Cat6/Cat5/Cat7 LAN Cable & RJ11 Phone Cable
Free ShippingMain highlights- What you will get: 1 x Cable Tester (NO BATTERY INCLUDED) + 1 x Instruction Manual; 18 Months Warranty for quality problem.
- VCELINK Multi-Functional Cable Tester checks the continuity, disorder or short of your RJ45 Cat6/Cat6A/Cat7/Cat5 LAN cable and RJ11 telephone cable, making sure you have your network wiring done correctly.
- Used in Long Distance: The MASTER unit and REMOTE unit can be separated by a slide so you can check the cable from both sides which saves quite a bit of walking for larger installations and long cables.
- Handy Size: This small and lightweight Ethernet cable tester will be a helper in home wiring, IT construction, electric maintenance, LAN cable DIY.
- Easy to Use & Simply Test: You can check whether the LEDs flash in order to make sure wires are in the right sequence. The S button for displaying LEDs slowly helps you figure out the faulty cable exactly.
9.5Excellent
Show more
- 05NOYAFA
NOYAFA NF-468S Network Cable Tester, RJ12 RJ11 RJ45 Ethernet Cable Tester for CAT5 CAT5E CAT6 CAT6A, POE Tester Continuity UTP/STP Cable Toner LAN Telephone line CAT3 Cable Network Tools
Free ShippingMain highlights- WARM REMINDER, WORRY-F.REE AFTER-SALES SERVICE: PLEASE DO NOT use live circuits to avoid damage to the tester; If you encounter any problems during use, please feel free to contact us we will reply to you within 24 hours
- UTP/STP TESTING: Indicator lights on the connected port in the device flash to help locate cables accurately. quickly detect the crimping condition of the crystal head, Shielded network cable can also be used(UTP/STP)
- POE Tester: Identifies PoE devices efficiently. Detects crossover methods (unknown/end-span/mid-span/8-core power supply) and polarity. Comprehensive PoE detection, including non-standard, IEEE 802.3AF, and IEEE 802.3AT.
- New Upgraded Multi-function Network Cable Tester: Test cables for shorts, opens, cross pairs and other wiring faults, continuity tester, keep network running smoothly, for RJ45 CAT5, CAT5E, CAT6, CAT6A, RJ11, RJ12 telephone line CAT3 (6P2C/6P4C/6P6C) POE test/router conversion
- Cable Length Test: NF468S cable tester can be used as a telephone line tester, the maximum test distance is 2000 meters.A low battery indicator will appear when the battery is low to remind the user to replace the battery in time. CAT6 CAT5 cable tester is lightweight and easy to carry.
9.3Excellent
Show more
- 06VCELINK
VCELINK Network Cable Tester, Ethernet Wire Test Tool for RJ45 CAT6A, CAT6, CAT5E, CAT5 Cable and RJ11 Phone Cable, Black, 1-Pack
Free ShippingMain highlights- WHAT YOU WILL GET: 1 x Network Test Tool (Black), along with our worry-free 18-month after-sales service. Requires one 9V battery (not included)
- PRACTICAL SEPARABLE DESIGN: The Ethernet cable tester features a separable slide design, ideal for easy storage and long-distance cable inspections up to 656.17 ft (200 m). Its compact, lightweight build ensures easy portability
- FAST AND CLEAR LED CABLE CHECKS: The network cable tester quickly checks cable status with LED indicators for fast/slow modes. The S button pinpoints faults, the G light identifies shielding and grounding, and a high-sensitivity chip ensures fast results
- COMPREHENSIVE CABLE TESTING: Tests for open, short, and miswire faults to ensure smooth network operation. LAN & TEL continuity tester supports RJ45 CAT7/6A/6/5E/5 Ethernet cables and RJ11/RJ12 telephone cables for comprehensive testing capabilities
- BUILT FOR TOUGHNESS AND PROFESSIONAL USE: Made from CE-certified, impact-resistant ABS plastic, the black design adds a professional touch. Crack, dirt, and scratch-resistant, ideal for home wiring, IT setups, and LAN cable DIY
9.2Excellent
Show more
- 07NOYAFA
NOYAFA NF-488 Network Cable Tester, POE Powered Ethernet Cable Tester, RJ45 Tester Kit for CAT5e/CAT6/CAT6a, RJ45 Continuity Check, Switch Loopback POE Detector, LAN Cable Tester Loop Test Tool
Free ShippingMain highlights- 【We are at your service】 NOYAFA NF-488 Ethernet tester is ergonomically designed. the curved design on both sides of the PoE tester makes it easier to hold and less likely to slip when using it, which is very friendly; your satisfaction is our top priority; if you have any questions, please do not hesitate to contact us
- 【Portable and easy to use】NOYAFA NF-488 multi-function network cable tester adopts a portable design, integrates all test functions into one, and comes with a portable case. It is easy to carry and can be used anytime and anywhere. In addition, you can set the lighting time and automatic shutdown time according to your needs. This POE power cable tester is widely used in the maintenance of networks and devices
- 【POE and Loopback Test】 NOYAFA PoE Ethernet cable tester is designed to test standard PoE devices, including af/at standards, current voltage, current polarity and up to 60V DC DC mode. The NF488 Cat6 tester can test the current, voltage and power of DC devices, and can also automatically detect and diagnose loopback problems and switch between 10M/100M/1000M mode. 1000M mode. This RJ45 tester includes functions such as cable tracing, short circuit test, circuit break test, loopback test, etc
- 【Multifunctional network cable tester】 NOYAFA NF-488 network cable tester is designed to help users with testing needs to shorten the time for cable testing and troubleshooting. It combines POE test, CONT, power function, loopback test and LED illumination in one device. Equipped with an RJ45 remote interface. Suitable for CAT5, CAT5e, CAT6, CAT6A cables. Multi-purpose, suitable for home, work, cabling projects, vacation gifts, is your reliable network tool
- 【LCD illumination and distance locating】NF-488 network tester is designed to be flexible and very user-friendly; you can set the illumination time and auto power off time as needed; LCD screen with backlight, test data can be seen at a glance; the design with light on the top works well in dark environment, rj45 cable tester can measure the cable length and locate the distance of faults on LAN cable accurately. The range is 200 meters
- 【Current and voltage test】 Connect the network cable to be tested to the transmitter, and the cable finder will automatically detect short circuit, crossover, open circuit, etc. of the network cable. At the same time, it can test the voltage and current between the power adapter and the power supply device and calculate the power consumption of the power supply device. Voltage detection range: 0-60V; Current detection range: 0~3A; Power detection range: 0-180W
8.9Very Good
Show more
- 08YOJOCK
Network Ethernet Cable Tester for LAN RJ45 RJ45 CAT5 CAT5E CAT6 CAT6A CAT7, Ethernet Wire Tester Tool UTP/STP Continuity Test for Telephone Line Finder Home Repair
Free ShippingMain highlights- Split-Type Design for Long-Distance Testing: Master and remote units can be detached and used separately, allowing you to test both ends of a long cable run, ideal for wall-mounted ports, long runs, or structured cabling. Perfect for home, office, or professional IT setups.
- Safe & Easy to Use: Simple one-button operation makes testing quick and hassle-free. LED indicators clearly show wiring status, while the G light instantly identifies shielded (FTP/STP) or unshielded (UTP) cables. Supports safe testing of telephone lines with typical voltages under 48-72V, ideal for both home and professional use.
- Multi-Function Network Cable Tester: Supports RJ45 (CAT5, CAT5e, CAT6, CAT6A, CAT7) and RJ11 telephone cables. Quickly detects continuity, short circuits, open wires, miswiring, and cable shielding status, ensuring your LAN or phone lines are correctly wired and ready to use.
- Fast/Slow Mode with LED Indicators: Switch between fast and slow scan speeds to identify wiring issues more precisely. LED lights on both master and remote units show wire order, making it easy to spot errors like open pairs or misaligned pins at a glance.
- Compact, Lightweight & Durable: Ergonomically designed with sturdy ABS housing, this pocket-sized tester is ideal for on-the-go network engineers, DIYers, and electricians. It’s your go-to toolkit for cable maintenance, upgrades, or new installations.
8.8Very Good
Show more
- 09iMBAPrice
iMBAPrice - RJ45 Network Cable Tester for LAN Phone RJ45/RJ11/RJ12/CAT5/CAT6/CAT7 UTP Wire Test Tool
Free ShippingMain highlights- Power Source: DC9V Battery Required (not included)
- Connectors: Ethernet Cat 5, Ethernet Cat 5e, Ethernet Cat 6, Ethernet Cat 7, RJ11 6P and RJ45 8P
- Cable state testing (2-wire): Line DC detecting, anode and cathode determination,Ringing signal detecting open, short and cross circuit testing
- Cable Type: RJ11 Telephone cable and RJ45 LAN cable
- Automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs. Visible LED status display.
8.6Very Good
Show more
- 10Sperry
Sperry Instruments TT64202 Cable Test Plus Coax and UTP/STP Cable Tester, 1/Clam, 2 Clams/Master , Yellow
16% OffMain highlights- Two jumper cables included for testing of installed UTP/STP wiring and coax wiring
- Test cables terminated with 4, 6, or 8 pin connectors
- Patent pending snap-together design for easy transportation and storage
- Bright LED's for easy indentification
- 10 Ft drop and 250 lb crush rating
8.5Good
Show more
