10 Best trolling motor for jon boat in Canada

Advertising Disclosure

Last Updated - 2024/05/07

Best Choice
01

VEVOR

Show more

On Amazon

VEVOR Electric Trolling Motor 86lb Thrust Transom Mounted 24-Volt Boat Motor Variable Speed 10 LED Indicator for Kayak, Inflatable Fishing Boats (34" Shaft)
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【Variable Speed & Adjustable Handle】More precise control of the boat's moving speed at your will up to 1700RPM. The up and down 12.4" adjustable handle help navigate through water and weeds. The handle angle, as well as mount, height, angle, and direction can all be adjusted and locked into place when needed.
【Upgraded Design】VEVOR boat motor features a 34-inch stainless steel shaft, copper motor and three-bladed propeller, which can enhance efficiency and service life, whatever sailing on saltwater or freshwater. Three sharp blades give the motor great low-end torque to get the boat moving. Suitable for small fishing boats, kayaks, inflatable boats, canoes.
【Powerful Motor】This 86lb thrust 24V electric trolling motor provides excellent power and efficiency for small to medium boats. High quality components allow the motor to run all day long without overheating or disturb your fishing experience.
【Adjustable Depth & Angle】You can easily adjust the shaft angle by press the button to fit different sailing conditions according to your fishing demands. Also, you can adjust the depth of the motor in the water with a knob for better fishing.
【10 LED Battery Indicator】 Make it easy to check your battery status. When the battery level drops below 20%, an audible notification alerts you to charge the battery. With this feature, you can quickly get back to fishing in no time! (Note: Battery not included)

CA$230.65
02

Pro Controll

Show more

On Amazon

Now you can mount a hand controlled trolling motor on the bow of your jon/utility boat. WILL NOT FIT ON KAYAKS! Pro Controll EZ Mount trolling motor mount is a versatile trolling motor mounting bracket that can be used on a boat with a 3" or less top rail or gunnel. It has an adjustable underside exterior bracket that allows for an easy no tools required installation.
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

UNIVERSAL FIT: Measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs; EZ Mount lets you install your transom mount motor anywhere on the boat
SUPERIOR QUALITY; Expertly engineered and quality tested; Built with the needs of the Angler in mind
PREMIUM DURABILITY: Constructed with stainless steel hardware and indestructible fiberglass reinforced nylon; Ergonomic hand-adjustable screw knobs
MORE MOUNTING OPTIONS: Fish from the bow like the Pros; An mounting bracket that converts transom mount trolling motors to bow mount; Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep
FAST SET UP: Simple and seamless tool-free installation; Line up the lower bracket to the outside of the boat, screw clamps tight, and slide on the trolling motor

CA$226.52
03

GOMADEIT

Show more

On Amazon

GOMADEIT Boat Rudder Clamp for Transom Trolling Motor Rudder, 1 1/8"
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

✅Trolling motor rudder is 1 1/8" in diameter, universal with most trolling motor. compatible with Minn Kota, MotorGuide, Newport Vessels, etc.
✅Trolling motor rudder fits for Inflatable Pontoons, Pelican Bass Raider 10E, Fishing Kayaks, Canoes, Jon Boats, and more.
✅The trolling rudder clip improves steering and control of your trolling boat in rough riding conditions.
✅The trolling motor rudder clamp made from impact plastic for durability, and comes with stainless steel screws.
✅The holes on the trolling motor rudder are circular and not resizable. The gaps can be filled with foam glue.
✅GOMADEIT provides free return and exchange service for life, please contact GOMADEIT by email.

CA$26.57
04

NyVoozy

Show more

On Amazon

NyVoozy Rudder Clamp on Boat Rudder Fits Most 24 to 55" Trolling Motors, Kayak Rudder Kit Designed for Kayak, Canoe, Angling Boat, etc, Electric Motors Rudder Clamp Widely Use for Canoe, Jon boat, etc
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

WIDELY USE FOR-Our kayak rudder kit measures 10.5" high x 4.75" wide and suitable for a 23-32MM" shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It's commonly used for motorguide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc.
PREMIUM MATERIAL-The body of our trolling motor accessories is made from PA66GF30 which is a new and premium material, it can last long time. And the screws are made from SU304 which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater.
OBVIOUSLY IMPROVED-Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don't worry rudder out of control any more.
EASY USE-It can be used when it is installed in the boat trolling motors, and it is easy to operate without any operation skills. Because the rudder accessories let you keep you on the right way and let you reduce wind resistance, so your trolling motor battery lasted longer.
EASY INSTALL-Very easy to install, with screws, you could install our trolling motor mount to trolling motor only a few minutes.

CA$25.66
Best Value
05

Haoguo

Show more

On Amazon

Haoguo Trolling Motor Accessories, Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

UNIVERSAL MOUNT - Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder. Please note, it will NOT work on a self deploy bow mount trolling motor
STURDY & DURABLE - The rudder is made of 100% stainless steel and is equipped with stainless steel screws and jam nut to improve stability, rust and corrosion resistance. It is sturdy and durable to extend the service life and allowing you to focus more on fishing
MORE CONTROL - Turns easily when steering and provides better control in wind and most weather conditions, decreasing the need for oars, it does help to keep your boat on course in the wind, and prevent the boat from spining as much when the motor is off
EASY INSTALLATION - Complimentary socket wrench for easy installation, it takes only a few minutes to attach the rudder to the shaft of your small watercraft motor and can be mounted in an upright position on the front or back of the shaft. You may even mount it with the short end down (upside down) for shorter motors. A universal design for your needs
BOW MOUNT - Fits the EDGE, Minn Kota, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Your bow mount setup needs to have 1ft shaft protruding from the end of the platform allowing enough room to attach the rudder

CA$40.09
06

U-BCOO

Show more

On Amazon

U-BCOO Bracket & Hinge Assembly Electric Trolling Motor Stent Electric Outboard Motor
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

Note: Please check if it is suitable for your electric outboard motor before placing an order. Thank you.
Max Width 6" (From washer to washer)
Max Transom Thickness 3"
Made of high strength nylon plastic
For shaft size 1 1/8"，Stainless steel hardware

CA$51.59
07

HPEVA

Show more

On Amazon

Trolling Motor Plug Receptacle Set for Marine Boat, Waterproof 12/24/36/48 Volt Trolling Motor Connector Kit for Down Rigger, Fishing Reel, DC Power, Trolling Motor Accessories
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【Widely Used】This trolling motor power plug is designed for harsh marine environments, and are ideal for trolling motors, lowering devices, down riggers, electric fishing reels, or any other DC-powered device.
【Wide Applicability】The marine trolling motor plug receptacle set is universal design for 2 wire configuration 12V, 24V, 12/24V, 24/36V, 36V or 48V system. 50A continuous rating. Compatible with 6 AWG wire.
【Safety & Convenient Design】A self-locking design, which can firmly connect the trolling motor to the power supply, effectively preventing the plug from accidentally falling off and ensuring safe use. With an ergonomically contoured handle, it can provide you with comfort while frequently connecting and disconnecting the trolling motor and battery. The watertight sealing cap and gasket to enhance the ability to be waterproof. Also,this set adopts direct insertion systems. Time and effort saving.
【Premium Quality】This Trolling Motor Plug Receptacle Set is made of brass gold-plated electrical components, which is corrosion-resistant. And the shell of it is waterproof, flame-retardant and high temperature resistance. It is Weatherproof, maximum durable for harsh marine environment.
【Easy to Install & Dismantling】You will get a completely assembled trolling motors plug receptacle set. If you need, you can dismantling it easily, just remove the screws, and rotate to release. It will be the best choice for your marine trip.

CA$23.59
08

Bullnose Products

Show more

On Amazon

Bullnose Rudder Clamp On Rudder Kit for 24-55 Thrust Trolling Motors: Accessory for Pedal Boats, Pontoons, Kayaks, or Canoes
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

QUALITY - Manufactured in the USA with high quality parts & material to help ensure you have a stress-free fishing experience. It is manufactured from impact plastic for durability and comes with stainless steel screws. It is built strong so you don't have to worry about it coming loose, allowing you to focus more on fishing. Patent no. D712,341S
PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S
FIT - The Bullnose Rudder is a boat rudder that fits 1 1/8" (1.125") transom mount trolling motors. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more.
ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install and you are ready to go.
BOW MOUNT - Fits the Minn Kota, EDGE, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Self deploy will not work because the system requires the shaft to slide up and down right where the rudder needs to be attached. However, a hand cable pull will allow you to carefully bring the motor up out of the water on the motor mount. Your bow mount setup needs to have 1' of shaft sticking out from the end of the platform allowing enough space to attach the rudder.

CA$59.99
09

Annurssy

Show more

On Amazon

Annurssy Brackets & Hinge Assembly for Boat Engine Outboard Electric Trolling Motor, Black
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

Very easy and quick to install
Universal bracket for electric trolling motors
Max Width 6"
Max Transom Thickness 3"
Made of high strength ABS plastic

CA$49.89
10

Brocraft

Show more

On Amazon

(Standard Bracket) - Brocraft Deck Mount Trolling Motor Bracket
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

Universal trolling motor bracket for clamp-on type electric trolling motors.
Maximum trolling motor thrust of 36 pounds,Come with a two years limited warranty
For electric trolling motors only. Not for outboard engines of any size.
Designed for motor to be removed when boat is under engine power or being trailered.
Constructed of marine aluminum with black Nylon plastic

CA$154.99