Advertising Disclosure
10 Best tip rtd in Canada
Best Choice01GxcdizxUpgrade Replacement for RTD Temperature Sensor Probe, for Camp Chef Woodwind and DLX Series, Replace PG24-44, Smoker Probe for Camp Chef Pellet Grill by Gxcdizx
Main highlights- TEMPERATURE PROBE PARAMETERS - For RTD temp sensor probe, 6-3/8" probe length, 47" heat woven wires length, comes with 1pcs screw and 1pcs nut
- Smoker Resistance Temperature Detector probe for Camp Chef Pellet Grill, rtd temperature sensor Compatible for Camp Chef Woodwind/ DLX Series, etc. Replacement for part PG24-44
- READS THE INTERNAL TEMPERATURE OF THE GRILL - The temperature sensor probe reads the internal temperature inside your BBQ and sends a signal back to the controller to maintain consistent grill temperatures
- INSTALLATION & CARE INSTRUCTIONS - Cut both leads off the old probe and remove old probe, before pulling out, tie a string onto the old temp probe wire and fish the wire thru hole to the controller using the old probe wire
- CARE - The tip of temp probe sensor cleaned with a damp rag, make sure the rtd sensor monitor the grills temperature data precise
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02BKIFU
RTD Temperature Sensor Probe Replacement for Louisiana Pellet Grill& Country Smoker Grills Series LG900,SL700,LG1200BL,LG1000BL,Replace Part 50151
Main highlights- The RTD Temperature Sensor reads the internal temperature of the grill, communicating with the controller to maintain consistent grill temperatures.
- SIZE: 2" Internal Grill Sensor, 36" stainless steel wire allows use with the control board,comes with 1pc screw and nut.
- Quality :The probe is 304 stainless steel, which has excellent processing performance, high toughness, and excellent high temperature and low-temperature resistance!
- Easy to install:This was a direct replacement for the original.This product worked well and was easy to install. (TIP: Please check spade connector style)
- COMPATIBILITY - Temperature sensor replacement for Louisiana Grill Series& Country Smoker Series， LG900,SL700,Black label 1200 etc.
9.7Exceptional
Show more
- 03TOPINCN
RTD PT1 Thermocouple Temperature Sensor Probe 1/2" NPT Thread Connector with 3 Wires 2M Cable, -58~572°F (-5~3 °C)
Main highlights- WORKING TEMPERATURE: -50 to 300 ℃ (-58~572℉)
- SIZE: Probe length: 50mm, Probe diameter: 6mm, Thread :1/2" NPT, Wire Length: 2m
- MATERIAL: Stainless steel inner thread base, terminal: 3 insulated forks
- HIGH PRECISE: High precision chip
- FEATURES: High temperature resistance, waterproof and oil-proof, tin plated copper wire
9.6Exceptional
Show more
Value for Money04FCCUMReplacement RTD Temperature Sensor Probe, Compatible with Louisiana Pellet Grill& Country Smoker Grills, Replace Part
34% OffMain highlights- USEFUL TIPS - To avoid temp probe damaged, do not place probe in water, wires rolled up in a large, loose coil during storage.
- REPLACE OEM PART - Smoker tempe sensor replace original accessories 50151, comes with 1pc screw and nut.
- GRILL THERMAL SENSOR SIZE - 2" Internal Grill Sensor, 36" stainless steel wire allows use with the control board.
- FRIENDLY SERVICE - If you have any questions, please contact us through Amazon Messenger.
- COMPATIBILITY - Temperature sensor replacement for Louisiana Grill Series& Country Smoker Series (TIP: Please check spade connector style)
9.4Excellent
Show more
- 05BlueStars
[Upgraded] BlueStars RTD Temperature Probe Sensor, Compatible with Pit Boss Pellet Grills and Smoker, Temp Probe Replacement, Meat Probe Sensor PB1000XL-025-R00 V2 (70123-AMP)
Free ShippingMain highlights- Superior Quality: BlueStars Thermometer Probe features a 304 Stainless Steel probe that is safe for foods and can withstand extreme heat up to 718°F (380°C). The electrical plug and stainless steel wire harness have a reliable design with materials that resist corrosion from outdoor cooking environments like heat, oil, dust,...
- Package Includes: 1x PB1000XL-025-R00 V2 Temperature Sensor Probe (Internal Grill Sensor: 3.5" | Stainless Steel Wire Lead: 17" | Black Cable & Plug: 2.83") (𝑃𝑙𝑒𝑎𝑠𝑒 𝑐𝑎𝑟𝑒𝑓𝑢𝑙𝑙𝑦 𝑐ℎ𝑒𝑐𝑘 𝑡ℎ𝑒 𝑠𝑝𝑒𝑐𝑖𝑓𝑖𝑐𝑎𝑡𝑖𝑜𝑛𝑠 𝑜𝑓 𝑦𝑜𝑢𝑟 𝑜𝑙𝑑 𝑀𝑒𝑎𝑡 𝑃𝑟𝑜𝑏𝑒 & 𝑡ℎ𝑒 𝑓𝑖𝑡𝑡𝑖𝑛𝑔 𝑚𝑜𝑑𝑒𝑙 𝑏𝑒𝑓𝑜𝑟𝑒 𝑝𝑢𝑟𝑐ℎ𝑎𝑠𝑖𝑛𝑔)
- Optimal Temperature Check: The Temp Sensor Probe helps measure the internal temperature of your grill/ smoker while cooking quickly & accurately. Its design allows you to track the food temperature without the need to open the grill lid, ensuring the heat remains stable during cooking and reducing the risk of undercooked or overcooked meat.
- Fit Models: It replaces RTD Temperature Probe Sensor part number #PB1000XL-025-R00 V2. It is compatible with the following Pit Boss Pellet Grills and Smokers with Digital Controller: Navigator 1150, 550, 700, 850; Sportsman 1000, 1100, 500, 820; Pro Series 1100 Combo, 1100-PS1 (Lowes), 820-PS1 (Lowes); KC Combo Platnum Series Lexington; 1000NC, 700NC, 440NC Nascar Edition; Tailgater, Classic, Austin XL, and all Vertical Smokers.
- Easy To Clean & Use: Simply clean the probe tip with a damp cloth after each use. (Note: The probe's wire and plug are NOT waterproof). For precise readings, calibrate the thermometer probe before use with a glass of ice water, it should read 32°F (0°C). Please avoid twisting the probe cable repeatedly, it will cause breakage.
- 100% Lifetime Protection: Enjoy reliable performance with our lifetime protection, ensuring that your product will always be covered for any defects or issues that may arise.
9.3Excellent
Show more
- 06DTC
Waterproof RTD PT100 Temperature Sensors Stainless Steel Probe with 2m (6.6') Lead Wire
9.2Excellent
- 07RASTKY
Outstanding Temperature Sensor RTD PT100 Probe Thread Thermocouple Tip - Thread 1/2'' NPT for Various Temperature Controllers (Protective Pipe 400mm)
Main highlights- [VERSATILE THREE TYPE]: With a 1/2-inch thread, this probe is compatible with a variety of applications. Enjoy flexibility and comfort without losing performance.
- [STAINLESS STEEL]: The temperature sensor probe made of stainless steel is durable. It is sturdy and guarantees long-term durability.
- [HIGH PERFORMANCE]: With exquisite workmanship, this temperature sensor probe ensures high efficiency and performance. Monitor and control temperatures with precision and accuracy.
- [EASY INSTALLATION]: The simple and uncomplicated design of this probe makes it easy to install. Quickly and effectively set up the temperature controller.
- [100% NEW PRODUCT]: Trust the quality of this temperature sensor probe. Suitable for all temperature regulators.
9.1Excellent
Show more
- 08Bezmaksas
RTD Sensor Probe Replacement for Camp Chef Wood Pellet Grills and Smokers, Internal RTD Temperature Probe Sensor Accessorie, Replace Parts for Camp Chef PG24-44
Main highlights- 【Friendly Assistance】- Our Grill RTD sensor probe are specifically designed to support for Camp Chef Pellet Grill and Smokers listed models. If you have any questions, feel free to connect with us through Amazon Messenger. We're here to ensure your grilling experience is nothing short of exceptional!
- ️【SEAMLESS INSTALLATION & CARE】- Installing replacement rtd probe is a breeze. Simply cut the old leads, thread the wire through the controller using the provided screw and nut, and ensure optimal performance by cleaning the sensor tip with a damp rag.
- 【DIRECT REPLACEMENT PART】- The rtd temperature sensor probe perfect replacement for Camp Chef part PG24-44, RTD temperature sensor probe features a 6-3/8" probe length and 47" heat woven wires length, ensuring compatibility and reliability.
- 【UPGRADE YOUR GRILLING GAME】- Elevate your grilling experience with our top of the line RTD temperature sensor probe, specially crafted for Camp Chef Pellet Grills and Smokers including Woodwind, DLX Series, and more. Achieve precision cooking like a pro!
- ️【PRECISION TEMPERATURE CONTROL】- Replace for camp chef rtd sensor meat probe accurately reads the internal temperature of your BBQ, empowering you to maintain consistent grill temperatures for mouthwatering results every cookout.
8.9Very Good
Show more
- 09FCCUM
Replacement for RTD Temperature Sensor Probe, Compatible with Camp Chef Wood Pellet Grills, Replace for Part PG24-44…
Main highlights- REPLACE OEM ACCESSORIES - RTD temperature probe sensor compatible with Camp Chef DLX and Woodwind series grill.
- PLUG AND PLAY - Replacement part for PG24-44, rtd temperature sensor comes with 1pc screw and 1pc nut.
- GOT BACK TO GRILLING - Internal grill rtd temp sensor probe reads the internal temp of the grill, 6-2/5" probe length, 47" wire length.
- FRIENDLY SERVICE - If you have any questions, please contact us through Amazon Messenger.
- A USEFUL TIP - To avoid rtd temperature sensor probe damaged, do not place the grill sensor probe in water, can be cleaned with damp paper towels or rags.
8.6Very Good
Show more
- 10
TIP TEMPerature ProductsTIP TEMPerature Products TIPACC299: RTD Jack Lg: 1011-RTD-Nickel Plated
8.5Good
