Advertising Disclosure
10 Best tdr tester in Canada
Best Choice01WANLUTECHWANLUTECH OTDR Fiber Optic Tester 1310/1550nm 28/26dB 5.4 inch Touchscreen Built-in OPM OLS VFL Event Map Support 4K IP Camera Test Cable Tracker RJ45 Cable TDR Test PoE Power Output Network Tools
Main highlights- [ Singlemode OTDR Fiber Optic Tester ] WANLUTECH OTDR MT-5500combines necessary fiber optic testing in one handheld device. OTDR test: wavelength 1310nm/1550nm, dynamic range 28dB/26dB. Quick Setup mode: quickly set wavelength, distance range, pulse width and measurement duration; Parameters Set mode: professional technicians can set the wavelength, distance range, pulse width, measurement mode, IOR, non-reflection threshold, end threshold and other parameters before testing, which will get more accurate curve results. As well, it is for maintenance and installation of 4K IP camera.(PLEASE NOTE: this 1310nm/1550nm model does not support testing live fiber)
- [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours
- [ OPM VFL LS OLS Event map ] OPM (Optical Power Meter: Calibrated Wavelength 850/1300/1310/1490/1550/1625nm); VFL: it is used to detect fiber for breakage, cracking, bending and other faults; LS (Light Source:mode CW/270 Hz/330 Hz/1 kHz/2 kHz); OLS (Optical Loss Test: It is used to test the insertion loss of optical passive devices); EVENT MAP: Visualise the results of fibre optic link inspections. Save and view the testing curves, support zoom and move curves, view details
- [ Network Test Tools & PoE & Wifi Analyzer ] Built-in porfessional network testing tools,such as Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor, etc. PoE power output: support PoE IEEE802.3af/at , max 48V, power output 30W. Wifi Analyzer, Support 2.4G frequency band, wifi connection, wifi list, wifi information, wifi signal strength detection
- [ Multi-function Tester ] More feature: 5.4'' IPS touch screen, 1920x1152 resolution, one gigabit Ethernet 10/100/1000M Port, audio in etc. Power input: DC12V1A. Power output: DC12V/3A,DC5V/1A
- [ 4K 12MP IP Camera Tester & Cable Tester ] It support to test max 4K 12MP IP cameras.Support IP Discovery/Quick OVIF/IPC test. It supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc. RJ45 Cable TDR Test: it can test cable pair status, length, attenuation, reflectivity, impedance, skew. UTP Cable Tester: Test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. Cable Tracer: Support searching for BNC cable, network cable and telephone cable from cluttered cables
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02WANLUTECH
WANLUTECH IP Camera Tester IPC 5000 Series CCTV Test, 5 Inch IPS Touch Screen 4K H.265 CVBS CVI TVI AHD Analog Camera RJ45 Cable TDR Tester with PoE/Rapid/IP Discovery/VGA (IPC-5200C Plus)
Main highlights- [ Upgraded IP Analog Camera Tester ] 5.4'' IPS touch screen,IP Discovery/Quick ONVF/IPC test /RTSP play /Client APK. Auto view the video, create testing report.Support batch activate Hik and DH cameras and modify IP address, modify password etc. Self-defined modify channel name. Supports CVBS analog camera test.1 channel BNC input, NTSC/PAL (Auto adapt); PTZ control, RS485 control, Baud 600-115200bps, compatible with more than 30 protocols
- [ TVI CVI AHD SDI Camera Tester ] WANLUTECH CCTV monitor tester supports 8MP TVI / CVI / AHD / SDI camera testing and UTC control, and supports calling OSD menu. Auto HD -recognize the resolution and image display of Analog and HD cameras. Support coaxial PTZ and call OSD menu. Support CVBS and 8MP TVI/CVI/AHD cameras. Select relative function on the right side toolbar to operate, functions including ''Photos'', ''Snapshot'', ''Record'', ''Playback'', ''PTZ'', ''Set''. Multiple preview APP supports synchronized preview of multiple cameras, playback of the camera 2 to 3 frames per second, up to 32 simultaneous preview
- [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours
- [ Multifunctional Camera Tester ] 1 channel HDMI input, support 4K 30FPS;1 channel VGA input. Support 48V PoE power output, max power 30W. Built-in 7.4V Li-ion battery, 3350mAh. DC12V/3A power output, supply temporarily power for the camera. Network tools: Ping, IP scan, Port Flash ,DHCP server, Trace Route. Built in Wi-Fi, display image from the wireless camera, create WIFI hotspot
- [ Cable Tracer Cable Test ] Digital Cable tracer can search BNC cable, network cable and telephone cable from the mess of cables. Support test UTP cable connection status and display on the screen. RJ45 cable TDR testing: test cable pair status, length, attenuation, reflectivity, impedance, skew
9.7Exceptional
Show more
- 03Triplett
Triplett TDR100 Cable Length Tester and Time Domain Reflectometer
Main highlights- Use for any cable consisting of at least 2 insulated metallic elements, one of which may be the sheath or shield of the cable; Auto-Zero and Auto-Range
- Precision cable tester with TDR (Time Domain Reflectometer) technology to measure cable length
- Auto-Sensitivity provides a closer match to a wide range of cables with only the V.O.P. settings required
- 20 built-in groups of standard cable V.O.P. (velocity of propagation) values and 99 memory locations store traces for future analysis
- 2.4" TFT color display with easy-to-use onscreen menu
9.6Exceptional
Show more
- 04NOYAFA
NOYAFA NF-8506 Network Cable Tester with IP Scan, CAT5 CAT6 Ethernet Tester
Main highlights- Port Flashing and Identification: Facilitates quick identification of network cable ports. Indicator lights on the connected port in the device flash to help locate cables accurately. Displays port information including operating rate, duplex mode, and negotiation settings
- POE Tester: Identifies PoE devices efficiently. Detects crossover methods (unknown/end-span/mid-span/8-core power supply) and polarity. Comprehensive PoE detection, including non-standard, IEEE 802.3AF, and IEEE 802.3AT.
- PING Tester+IP Scanner: This handheld Ping cable toner can be used to diagnose and maintain local area networks (Lans) running TCP/IP protocols. Powerful PING capabilities can verify connections, check the integrity of transmitted and received data, indicate network traffic load by measuring round-trip times and provide IP addresses
- New Upgraded Multi-function Network Cable Tester: NF-8506 TDR network tester has IP scanning, POE test, anti-interference RJ11 RJ45 CAT5 CAT6 cable test, continuity test, Ping network rate test, port flashing, sensitivity adjustment, cable Function of length test and LED flashlight.
- Network Rate Test + Cable Continuity test: Ethernet tester can quickly assess network rate speed issues. Conducts PING tests from multiple locations to gauge server and website response speeds. Allows users to ensure the integrity and connectivity of network cables by identifying any breaks, openings, or short circuits along the cable length.
- Cable length test: The NF-8506 Network cable tester is a portable cable length tester. The cable tester can accurately measure the cable length in the range of 8.2ft/ 2.5m-656ft /200m, find the cable fault distance and facilitate real-time field measurementt
9.3Excellent
Show more
Value for Money05NOYAFAAT278 TDR Network Cable Tester LCD for RJ45/RJ11/BNC POE PING Length Test
Main highlights- 【Warning】Please make sure to test on the POE/PING port during the POE test, if you test on other ports, it may damage the motherboard; The withstand voltage of POE/PING port is 48V or less, and the withstand voltage of other ports is 24V, if the test voltage is greater than the above voltage range, it may also cause damage to the motherboard, so please pay attention to it before testing
- 【PoE & PING】PoE: Identify PoE presence and detect how much voltage. PING: To test network performance, data packet, min & max time
- 【Main Function-Fault Distance】Measures cable length and display the distance to fault, graphical wire mapping, opens, shorts
- 【Hub Blink】To locate network port by the flashing port light on a server/switch/hub/router port
- 【AT278 Cable Tester Benefits】TF card included to export data to PC; Voltage detector: included in receiver (90-1000V); Rechargeable Lithium battery for more efficient work; Low voltge alarm function and automatic delay power on-off; Big LCD color screen 320*240 and lighting lamp in darkness
- 【AC Filter】Tone trace cable with complete AC Interference Rejection, available on common switch & PoE Switch, much stronger than other tracers on markets
9.2Excellent
Show more
- 06FNIRSI
FNIRSI LPM-10A Network Cable Tester Kit, for CAT5 CAT5e CAT6 RJ11 RJ45
Main highlights- 【POE & Network Performance Test】This ethernet cable tester measures cable length, verifies 10/100/1000Mbps speed & auto-detects standard/non-standard POE. Ideal for cameras, APs & switches as a heavy-duty cable tester.
- 【NCV & Live Wire Detection】Built-in non-contact voltage test for safe on-site use. This versatile wire tester & network tester alerts to live AC wires, lowering shock risks while tracing or testing cables.
- 【Jobsite Ready Design】Rechargeable transmitter & receiver, low-battery alert & built-in flashlight. Portable ethernet toner and probe kit designed for long shifts & dark wiring spaces.
- 【Cable Tracing & Port Finder】FNIRSI LPM-10A wire tracer electrical & ethernet cable tracer quickly locates Ethernet cables & identifies active ports. Adjustable sensitivity makes this cable toner & wire toner perform reliably in noisy, bundled cable environments.
- 【Cable Continuity & Crimp Test】Professional ethernet tester checks RJ45 continuity, crimp quality, couplers & patch cords. Instantly diagnoses opens, shorts, miswires & faults for reliable network cable tester results.
9.1Excellent
Show more
- 07WANLUTECH
4K 12MP IP Camera Tester, WANLUTECH IPC Tester 90W PoE Power Output 8'' Touchscreen CCTV Test SFP Optical Fiber Module Port RJ45 Cable TDR Test WiFi Network Tools (E88)
Main highlights- [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours
- [ Multifunctional CCTV Camera Tester ] The OS of IPC tester is Android. WIFI Analyzer: support to analyse wifi signal strength,channel,channel level, support to create WI-FI hotspot. PoE Detection: measurement POE switch or PSE power supply voltage and cable connection status. Power Management: check real-time voltage and power of POE, DC12V, DC24V power output and PSE input, DC15V power input. Data monitor: Captures and analyzes the command data from controlling device, also can send hexadecimal. Power input:DC15V, Power output:DC12V/3A, DC24V/2A, DC5V/2A
- [ IP Camera Tester ] WANLUTECH IP camera tester with PoE, it support max 90W POE power output, temporarily powers the high-power PTZ camera or other devices supported by the IEEE 802.3af/at/bt standard protocol. DC15V power intput. It has 8 inches touch screen. Support IP Discovery/Quick OVIF/IPC test/Rapid Video, auto view the video, create testing report. It has a gigabit SFP optical fiber module port, support insert SFP optical fiber module, for optical fiber network testing
- [ Camera Test Tools & Network Tools ] The IP camera tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, support to self-defined modify channel name, factory reset, etc. Network Tools: Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor
- [ Cable Tester ] RJ45 Cable TDR Test: it can test cable pair status, length (up to 180 meters), attenuation(only network cables exceeding 10 meters can be used for testing), reflectivity, impedance, skew. UTP Cable Tester: test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. Cable Length Test: Measure the breakpoint position of (open circuit status) BNC cables, RJ45 network cables, RJ11 cables, test length max 3000 meters
8.8Very Good
Show more
- 08Kuuleyn
Kuuleyn Network Tester, Wire Tracer, Cable Fault Tester TDR Network Locator Coaxial Communication Wire Digital Waveform Automatic Recognition 8KM
Main highlights- MEASUREMENT OBJECT: Cable fault intelligent rangefinder is suitable for automatically measuring the power cable, communication cable broken line, mixed line, ground air and other core line fault accurate position
- FAST AND ACCURATE: Our products use advanced technology and professional design, featuring high accuracy, stable performance and high reliability. Cable fault locator use for ARM CPU and for FPGA technology to quickly perform complex operations and accurately determine fault waveforms
- DIGITAL DISPLAY: Cable fault tester has a large screen color LCD display, humanized interface menu design, quick digital keys, convenient for use personnel to operate.The large LCD display makes reading measurements a breeze, enhancing user convenience and minimizing the risk of errors during operation
- DAGC(DIGITAL AUTOMATIC GAIN CONTROL)SYSTEM: Cable fault tester can adjust the gain digitally. Eliminate the waveform distortion caused by the potentiometer knob of the original instrument of the same type. Can also do pure linear adjustment, which is conducive to manual testing
- AUTOMATIC IDENTIFICATION AND COMPARISON OF DIGITAL WAVEFORMS: Network cable fault tester relies on the machine to automatically identify the waveforms that are difficult to judge manually, compare the waveforms, facilitate the comparison of the test waveforms of the fault line and the normal line, and clearly locate the fault point
8.6Very Good
Show more
- 09NOYAFA
NOYAFA NF-8601S Network Cable Tester, Ethernet Tester with LCD Tracer, PoE Test for RJ45, RJ11, BNC/Metallic Cables, PING Line Tracer, Crosstalk Test for Length and Fault Distance Detection
Main highlights- 【Warning】 Please make sure to test on POE/PING port when testing POE, if testing on other ports, it may damage the motherboard; POE/PING port withstand voltage is 48V or less, other ports withstand voltage is 24V, if the test voltage is greater than the above voltage range, it may also cause the motherboard to be damaged, please pay attention to this before testing
- 【POE & PING TEST】 NOYAFA NF-8601S Ethernet cable tester can which pins are providing power and detect the voltage level. ping function for testing network performance, packets, min and max time, AC FILTER: Tone tracing cable with full AC interference suppression can be used for both normal switches and PoE switches, which is more accurate than other tracers in the market. trackers on the market
- 【Multi-function Tester】 NOYAFA NF-8601S Ethernet cable tester integrates continuity test, cable scanning, port flash, length measurement, PING test, POE power test, QC test and NVC functions in one device. It realizes multi-purpose and flexible use to meet your testing needs. A must-have tool for modern network technicians and DIY enthusiasts
- 【Length Measurement and Fault Distance Measurement】 NOYAFA network cable tester utilizes TDR theory to accurately measure cable length through intuitive length graphics and provide fault distance information. Display graphic line diagram, open circuit, short circuit. Dynamically calibrated cable length, with new measurement technology, the measurement accuracy is up to 99%
- 【Anti-jamming Network Cable Tester】NF-8601S Network Cable Tester is designed with advanced LCD display, which shows the fault location through an intuitive graphical interface with smart wiring diagram. And with the latest TDR technology and complete AC interference suppression, it is easier than other tracers in the market. Widely used in engineering cabling, network and equipment maintenance
- 【Advantages of NF-8601s cable tester】NF-8601s network cable test kit with TF card to export data to PC; Voltage detector: included in the receiver (90-1000V); Rechargeable Li-ion battery for higher efficiency; Low-voltage alarm function and automatic time-delayed switching; 2.8-inch color screen and LED function, so that you can work in the dark
8.5Good
Show more
- 10WANLUTECH
4K 12MP IP Camera Tester, WANLUTECH 90W PoE Power Output 8'' Touchscreen CCTV Test for 8MP TVI CVI AHD CVBS Cameras, SFP Test, RJ45 Cable TDR Test, WiFi Network Tools, HDMI VGA (E89)
Main highlights- [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours
- [ Multifunction CCTV Monitor Tester ] RJ45 Dual Gigabit Ethernet ports, 10/100/1000Mbps adaptive, HDMI in, VGA in, Audio I/O, RS485, WiFi analyzer. Network Tools: IP scan, PING test, PPPOE, trace route, link monitor, DHCP server, port flashing, etc. PoE Detection: measurement POE switch or PSE power supply voltage and cable connection status. Power Management: check real-time voltage and power of POE, DC12V, DC24V power output and PSE input, DC15V power input
- [ IP Analog Camera Tester ] WANLUTECH IP camera tester with PoE, it support max 90W POE power output, temporarily powers the high-power PTZ camera or other devices supported by the IEEE 802.3af/at/bt standard protocol. DC15V power intput. It has 8'' touchscreen, 1920x1200 resolution. It support to test max 4K 12MP IP cameras, support CVBS analog camera test. The CCTV tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc. Support IPC Test/IP Discovery/Rapid Video/RTSP Play /Quick OVIF/Hik DH test tool/Client APK. It has a gigabit SFP optical fiber module port, support insert SFP optical fiber module, for optical fiber network testing
- [ Cable Tester ] RJ45 Cable TDR Test: it can test cable pair status, length (up to 180 meters), attenuation, reflectivity, impedance, skew. UTP Cable Tester: test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. Cable Length Test: Measure the breakpoint position of (open circuit status) BNC cables, RJ45 network cables, RJ11 cables, test length max 3000 meters
- [ AHD TVI CVI Camera Tester ] WANLUTECH CCTV camera tester supports to test max 8MP AHD/TVI/CVI/CVBS camera. Using "AUTO HD" app can automatically recognize AHD CVI TVI CVBS cameras and display resolution and frame rate on the screen, supports UTC control & call OSD menu, menu settings, screenshot, video recording, video playback, etc
8.4Good
Show more
