Advertising Disclosure
10 Best tdr cable tester in Canada
Best Choice01WANLUTECH4K 12MP IP Camera Tester, WANLUTECH IPC Tester 90W PoE Power Output 8'' Touchscreen CCTV Test SFP Optical Fiber Module Port RJ45 Cable TDR Test WiFi Network Tools (E88)
Main highlights- [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours
- [ Multifunctional CCTV Camera Tester ] The OS of IPC tester is Android. WIFI Analyzer: support to analyse wifi signal strength,channel,channel level, support to create WI-FI hotspot. PoE Detection: measurement POE switch or PSE power supply voltage and cable connection status. Power Management: check real-time voltage and power of POE, DC12V, DC24V power output and PSE input, DC15V power input. Data monitor: Captures and analyzes the command data from controlling device, also can send hexadecimal. Power input:DC15V, Power output:DC12V/3A, DC24V/2A, DC5V/2A
- [ IP Camera Tester ] WANLUTECH IP camera tester with PoE, it support max 90W POE power output, temporarily powers the high-power PTZ camera or other devices supported by the IEEE 802.3af/at/bt standard protocol. DC15V power intput. It has 8 inches touch screen. Support IP Discovery/Quick OVIF/IPC test/Rapid Video, auto view the video, create testing report. It has a gigabit SFP optical fiber module port, support insert SFP optical fiber module, for optical fiber network testing
- [ Camera Test Tools & Network Tools ] The IP camera tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, support to self-defined modify channel name, factory reset, etc. Network Tools: Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor
- [ Cable Tester ] RJ45 Cable TDR Test: it can test cable pair status, length (up to 180 meters), attenuation(only network cables exceeding 10 meters can be used for testing), reflectivity, impedance, skew. UTP Cable Tester: test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. Cable Length Test: Measure the breakpoint position of (open circuit status) BNC cables, RJ45 network cables, RJ11 cables, test length max 3000 meters
9.6Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Rsrteng
Multifunction Network Caber Tester,UTP Ethernet Cable Tester,Cable Tracer,Rechargeable 4" IPS Touch Screen Network Tester Support POE Test,RJ45 TDR,Length,Network Tools IP/LLDP/CDP/PING/PPPOE/Tracer
Main highlights- 【UTP & Tracer & RJ45 TDR & Length】Advanced UTP cable test can easily test UTP cable's sequence, type and remote kit. Confirms cable location and detects cable faults (opens, shorts, and reversed pairs). Ethernet cable tracer can quickly find out the target cable(BNC cable,network cable and telephone cable and other various metal) from the mess cables. cable from the mess cables. Digital signal (decisively rejects noise and false signals).
- 【RJ45 TDR Cable Test & Length Meter】RJ45 TDR test can easily test pair status,length,attenuation,reflectivity,impedance, skew, and other parameters,max 180 meters (590 feet). Cable length meter Measure opens of network cables, max measurement length up to 3000 meters. Accuracy: Cable length x 3% ± 1m.
- 【POE++ Detection & Network Tools】Powerful All-in-One network tools, with the PoE tester supports IEEE 802.3at/af/bt and non-standard PoE protocols. It displays supply voltage, power pins, and pin polarity. The network tester is features a built-in 1000M network port and a range of tools, support IP discovery, IP address scan, PING test, LLDP/CDP detection, Port flashing, PPPOE dial-up.
- 【Battery & FTP Server】 The Ethernet Cable Tester support PD power and not-contact AC voltage detect. The transmitter has a built-in 3.7V 4000mAh rechargeable battery and the receiver has a built-in 3.7V 2000mAh rechargeable battery, providing excellent battery life. The FTP function enables users to copy test reports and data via network FTP. Rsrteng will do our best to resolve any technical support issues as soon as possible.
- 【 Multifunction Network Cable Tester Model: LT-600】Ethernet cable tester with 4-inch IPS touchscreen with 800×480 resolution. Multifunction network tester support UTP cable test, RJ45 TDR cable test, cable search, Network tools, POE++ detect. length meter, FTP server and more.
9.5Excellent
Show more
- 03NOYAFA
NOYAFA NF-8209S Network Cable Tester, Ethernet Cable Tester with CAT5, CAT6 Line Tracer, PoE, NCV, Length Test, Port Flashing, Fault Line Scan for Cable Grooming, LAN Network Cable Tracer Kit
12% OffMain highlights- 【Rechargeable Lithium Battery】 NOYAFA MF-8209S Ethernet cable tester has a built-in 1400 mAh rechargeable lithium battery, providing long-lasting battery life. It also supports USB-C charging, which is convenient for long-term use. In addition. If you have any questions about the product or need feedback, please feel free to contact us
- 【RJ45 Network Cable Tester】 NF-8209S RJ45 Network Cable Tester can detect shorts, breaks, crossed pairs and other faults in RJ45, CAT5, CAT5E, CAT6, CAT6A, RJ12, RJ11, CAT7 and CAT8 cables. NCV function can easily locate network ports, suitable for line search, underground telephone line detection and home network maintenance. A must-have tool for network technicians
- 【Port Flashing】NF-8209S network line tracer locates the network port by flashing the port indicator on the hub/switch and the flashing hub to quickly locate the network cable on the switch/router. It can be used for 10M/100M/1000M hub/switch, and adds a compression function test to test whether the crystal head is compressed
- 【POE, NCV test】NF-8209S wire tracer tester determines which pins are powered and detects voltage, determines PSE type according to AF standard, detects the presence of AC voltage (50V-1000V), and tests the physical status of STP and UTP network cables
- 【Multi-function Design】Noyafa nf-8209s multi-function network cable tester combines POE cable tester, CONT, power function, line voltage detection, line tracing, loopback test and LED lighting. Equipped with RJ45 remote interface. Suitable for cat5 tester/cat6 tester CAT5/5e CAT6/6A cable tracer, underground telephone line finder, home maintenance, achieving multi-purpose and portability to meet your testing needs
- 【Digital Cable Scan】NOYAFA NF-8209S ethernet cable tester kit (LAN cable tester) is a new generation of network tone generator and probe, which can provide AC filter and analog signal. It has three cable tracing modes to choose from: normal mode/anti-interference mode/PoE mode
- 【Cable Length Test and LED Light】NOYAFA MF-8209S network cable tester supports LED light, you can turn on the lighting in low-light or dark environments. It can accurately measure the cable length without calibration, the measuring range is 1-600 meters, the length measurement accuracy is up to 99%, and detect cable crossover, short circuit and break
9.4Excellent
Show more
- 04NOYAFA
NOYAFA Network Cable Tester with IP Scanner, TDR CAT5 CAT6 Ethernet Cable Tester, PoE PingTest, Network Rate Test, Port Flashing, Network Tester Cable Toner for RJ11 RJ45 Ethernet LAN
Main highlights- Time Domain Reflectometry (TDR): The NF-8506 Network cable tester is a portable Time Domain Reflectometry (TDR) cable length tester. The cable tester can accurately measure the cable length in the range of 8.2ft/ 2.5m-656ft /200m, find the cable fault distance and facilitate real-time field measurementt
- Port Flashing and Identification: Facilitates quick identification of network cable ports. Indicator lights on the connected port in the device flash to help locate cables accurately. Displays port information including operating rate, duplex mode, and negotiation settings
- POE Tester: Identifies PoE devices efficiently. Detects crossover methods (unknown/end-span/mid-span/8-core power supply) and polarity. Comprehensive PoE detection, including non-standard, IEEE 802.3AF, and IEEE 802.3AT.
- PING Tester+IP Scanner: This handheld Ping cable toner can be used to diagnose and maintain local area networks (Lans) running TCP/IP protocols. Powerful PING capabilities can verify connections, check the integrity of transmitted and received data, indicate network traffic load by measuring round-trip times and provide IP addresses
- New Upgraded Multi-function Network Cable Tester: NF-8506 TDR network tester has IP scanning, POE test, anti-interference RJ11 RJ45 CAT5 CAT6 cable test, continuity test, Ping network rate test, port flashing, sensitivity adjustment, cable Function of length test and LED flashlight.
- Network Rate Test + Cable Continuity test: Ethernet tester can quickly assess network rate speed issues. Conducts PING tests from multiple locations to gauge server and website response speeds. Allows users to ensure the integrity and connectivity of network cables by identifying any breaks, openings, or short circuits along the cable length.
9.3Excellent
Show more
Value for Money05AOBOTESKPRONetwork Cable Tester, 8 in1 Ethernet Cable Tester, RJ45 Wire Tracer & Cable Toner for CAT5 CAT6 CAT7 Cable Finder with PoE Tester, OPM, VFL, NCV, Length Test and Port Flashing Network Tool
19% OffMain highlights- Port Flash Test Used to locate the corresponding interface of the target network cable on the switch. Transmits signals to trigger the switch interface light to flash for quick and easy identification.
- POE Test Function Designed for testing PoE switch output voltage, compliance with PoE standards (IEEE 802.3af/at/bt) or non-standard PoE devices. Compatible with IEEE 802.3af/at/bt and non-standard PoE switches. Supports three power supply modes: 12/36 End-span; 45/78 Mid-span; 12/36 & 45/78 4-pair PoE.
- OPM & VFL (Visual Fault Locator) The VFL function identifies fiber optic breaks, bends and poor connections. The optical power meter verifies if optical signal power meets standards, supporting 10 wavelengths: 850/980/1270/1300/1310/1490/1550/1577/1625/1650nm. It also assesses transmission loss during fiber optic signal transmission.
- CONT/SCAN & Cable Length Test Detects network cable connection status and faults, with clear judgment of test results including pass, open circuit, short circuit, crossover, etc. The SCAN test helps locate target network cables accurately. Measures cable length within the range of 1–305 meters (3.28–1000.66 feet). Applicable to CAT5/CAT6/CAT7 network cables, phone lines and BNC cables.
- All-in-One Network Testing Tool Equipped with CONT/SCAN test, cable length test, POE test, port flash test, VFL (Visual Fault Locator), QC test, optical power meter, NVC (Non-contact Voltage Detection), flashlight and automatic shutdown function (for receiver). An essential tool for telecommunications, computer maintenance, engineering wiring, network deployment and home use.
9.2Excellent
Show more
- 06Uni-Trend
UNI-T Network Cable Tester,UT685B KIT TDR Cable Tester,ethernet Cable Wire Tracker Detector,LAN Tester RJ11 rj45 Tester Network Tools
Main highlights- Prueba de alimentación Ethernet (poe): Power over Ethernet Tester displays PoE wire and voltage information, length measurement, wire locator and tests the faults of LAN network.enabling convenient PoE testing and troubleshooting
9.1Excellent
Show more
- 07FNIRSI
FNIRSI LPM-10A Network Cable Tester kit, Ethernet Cable Tester Wire Tracer, Cable Toner Wire Tester, Network Tester with POE/NCV/Length Test, Rechargeable Ethernet Toner for CAT5 CAT6 RJ11 Cables
Main highlights- 【POE & Network Performance Test】This ethernet cable tester measures cable length, verifies 10/100/1000Mbps speed & auto-detects standard/non-standard POE. Ideal for cameras, APs & switches as a heavy-duty cable tester.
- 【NCV & Live Wire Detection】Built-in non-contact voltage test for safe on-site use. This versatile wire tester & network tester alerts to live AC wires, lowering shock risks while tracing or testing cables.
- 【Jobsite Ready Design】Rechargeable transmitter & receiver, low-battery alert & built-in flashlight. Portable ethernet toner and probe kit designed for long shifts & dark wiring spaces.
- 【Cable Tracing & Port Finder】FNIRSI LPM-10A wire tracer electrical & ethernet cable tracer quickly locates Ethernet cables & identifies active ports. Adjustable sensitivity makes this cable toner & wire toner perform reliably in noisy, bundled cable environments.
- 【Cable Continuity & Crimp Test】Professional ethernet tester checks RJ45 continuity, crimp quality, couplers & patch cords. Instantly diagnoses opens, shorts, miswires & faults for reliable network cable tester results.
8.8Very Good
Show more
- 08NOYAFA
NOYAFA NF-8506 Cable Tester With IP Scanner, Rate Test, NCV POE/Ping/TDR CAT5 CAT6, Toner for RJ11 RJ45 LAN Ethernet Telephone Cable Finder Tool
Main highlights- 【Port Flashing】The indicator light on the connection port in the NF-8506 device flashes to help accurately locate the cable. Displays port information, including operating speed, duplex mode, and negotiation settings. Port lights flash on the same screen to show the port's operating speed, making it easy to pinpoint lines and ports.
- 【POE Tester】Efficiently identify PoE devices. Detect crossover mode (unknown/end-span/mid-span/8-core power supply) and polarity. Comprehensive PoE detection including non-standard, IEEE 802.3AF/IEEE 802.3AT.Automatically detects and switches between 10M/100M/1000M modes. Includes cable tracing, short-circuit testing, circuit interruption testing, and more.
- 【PING/IP Test Tool】This handheld Ping cable toner can be used to diagnose and maintain local area networks (LANs) running TCP/IP protocol. Powerful PING functionality authenticates connections, checks the integrity of transmitted and received data, indicates network traffic load by measuring round-trip time, and provides IP addresses
- 【Network Cable Tester】Newly upgraded multifunctional NF-8506 TDR network tester, an IP test tool with IP scanning function, POE test, anti-interference RJ11 RJ45 CAT5 CAT6 network cable ,test,connectivity test, Ping network speed test, port flashing, Sensitivity adjustment, network cable length function test
- 【NVC /LED light】NOYAFA NF-8506 easy to accurately locate the target cable, LED lights solve the problem of working in dark environments,widely used in engineering cabling, network and equipment maintenance and A perfect gift for friends and family
- 【Ethernet Cable Speed Tester】The Ethernet tester can quickly evaluate network rate problems,Network Rate Test. Conduct PING tests from multiple locations to measure server and website responsiveness. Allows users to ensure network cable integrity and cable continuity testing by identifying any breaks, openings or shorts along the length of the cable
- 【Cable Length Measurement】NF-8506 network cable tester is a portable time domain reflectometer (TDR) cable length tester. The cable tester can accurately measure cable length within the range of 8.2ft/656ft/2.5m-200m, measure data in real time, and scan cable fault distances.
- NOYAFA NF-8506 multifunctional network cable tester tool is designed for network engineers, IT professionals and DIY enthusiasts. Whether you are performing home network, commercial industrial communication network installation and maintenance, the portable cable tester is a must-have internet repair tool for anyone involved in network setup or cable scanning troubleshooting. Ideal for professional installation of smart home networking equipment or for troubleshooting network cables on construction sites.
8.5Good
Show more
- 09YILTION
NF-859GK Multi-function TDR Network Cable Tester with IP CAT5 CAT6 CAT7 Tester PING/POE/RJ45 RJ11 Cable Toner Tester for CAT3 Telephone Lines Ethernet LAN Wire Tracer LAN Tool
Main highlights- 【TDR Precision Measurement + Intelligent Localization】Equipped with TDR (Time Domain Reflectometry) technology, it provides real-time measurement of cable length from 2.5m to 200m, accurately locating faults such as breakages or short circuits. Port flashing function + LED auxiliary light allows quick cable identification in dark environments, solving the sore spots of messy wiring and hard-to-find ports to increase maintenance efficiency
- 【Professional POE Detection + Self-Adaptation】Accurately identifies standard and non-standard IEEE 802.3AF/AT POE devices. Detects crossover mode, polarity and power type. Automatically switches between speeds of 10m/100m/1000m. Supports short circuit and open circuit fault detection. An essential tool for IT operations and security engineers testing POE cameras and AP devices
- 【IP/PING Network Speed Diagnostic】Checks LAN connection integrity through multi-location PING testing. Measures server/IP address analysis, displays IP addresses, and identifies network speed bottlenecks. Simultaneously checks cable continuity and data transmission stability to quickly troubleshoot network lag and connection drops, ensuring efficient network operations in office/engineering.
- Portable Durability + Wide Compatibility - Lightweight and portable design ensures easy carrying. The receiver works with multiple transmitters, including NF-859GT/GS/GE/GK, making it suitable for engineering cabling, corporate network maintenance and home network. The two RJ45/RJ11 interfaces support different cable types, making it an essential tool for technicians and a thoughtful holiday gift for IT professionals. Customer service available for online replies within 24 hours.
- 10 in 1 All-in-One Network Diagnostic Tool - Say goodbye to multiple devices. The TDR NF-859GK network tester incorporates 10 main functions, including POE detection, IP/PING testing, cable length measurement, and port flicker location. Compatible with RJ11/RJ45 interfaces and CAT5/CAT6/CAT3 cables, it handles all scenarios, from technical cabling to network maintenance and equipment troubleshooting
8.4Good
Show more
- 10NOYAFA
NOYAFA NF-8209 Network Cable Tester, Ethernet Cable Wire Tester with POE & NCV for CAT5/CAT6 Wire Tracer, Length Test, RJ45 Network Tester Kit for Cable Tracer Telephone Line Finder Home Repair
Main highlights- Quality Service & LED Light: NOYAFA network tool kit supports LED light, you can use it to turn on the light in low light or dark environment. And if you have any questions when using the cable tester, please feel free to contact us. We will reply to you within 24 hours.
- Port Flashing & NCV: Cat6 tester can easily locate network ports using the blinking port lights on 10M/ 100M / 1000M hubs/switches, can detect the presence of AC voltage (50V-1000V) through the NCV function, which is an essential tool for cabling engineers.
- Multi-Cable Tester: NF-8209 ethernet tester is a digital signal receiving technology, integrating the functions of CONT, length test, scanning, POE, FLASH, QC and NCV. The network tester is suitable for CAT5 CAT6/6a cable and PSE standard (at/af standard) testing, recognizing power supply mode and verifying RJ45 cables.
- Length Test: The RJ45 cable tester provides high-precision length measurement (1.5–200 meters, 99% accuracy), identifying open/short circuits and displaying results instantly for quick fault location in cables and ports.
- Continuity & POE Testing: The POE tester tests standard PoE devices, supply voltage, power polarity and mode, up to 60V DC. The wire tracer can test the physical state of STP and UTP LAN cables, perfect for line test, home maintenance, realizing multi-purpose and easy to use.
8.1Good
Show more
