Advertising Disclosure
10 Best tap cartridges 28 teeth in Canada
Best Choice01
TMLReplacement Tap Cartridge Faucet Cartridge Ceramic Valve Pair 28 Teeth x 48mm Height Compatible with SMR San Marco 3982R / 3540R
Main highlights- See full Product drawing for full dimensions
- Premium Quality
- Pair Quarter Turn Valves (one Clockwise, One Anticlockwise)
- Brass screws included (M4)
- 28 Teeth 7.8mm Diameter spline Compatible with 3982R / 3540R
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money02
Tap MagicianTap Magician Hot Side Tap Cartridge Compatible with Franke Olympus
Main highlights- This valve with adapter is suitable for most Olympus models.
- This valve is not compatible with Olympus Triflow model. -
- Tap Magician valve and adapter fully compatible with Franke Olympus taps (hot side only).
- Adapter not compatible with Olympus G (recognizable by red and blue indicators on lever handles).
9.5Excellent
Show more
- 03Micro Traders
Micro Traders 1/2" Tap Cartridge Valve for Basin VS5412-BZ24 Brass Replacement Valve Core Compatible with Bristan Club
Main highlights- Universal for hot and cold water. Maximum operating temperature: 90 ¡æ.
- This faucet replacement valve core comes with an M4 screw to replace your old or damaged parts.
- Material: Made of brass, it has a long service life and is not easy to damage.
- Dimensions: Spline: 28 teeth, spline diameter 7.65 mm. Length range: 48-53 mm, interface size 20.5 mm (1/2 inch), please compare with the old part and check the size chart before purchasing.
- Compatibility: This 1/2" threaded faucet replacement cartridge is compatible with Bristan Club, for kitchen or bathroom faucets.
9.2Excellent
Show more
- 04
TML
Replacement Cold Tap Cartridge Ceramic Valve 28 Teeth x 52mm Height Compatible with SMR San Marco 3602R / (3419R)
Main highlights- Single Quarter Turn Valves (Clockwise open)
- See full Product drawing for full dimensions
- Premium Quality
- Brass screws included (M4)
- 28 Teeth 7.8mm Diameter spline Compatible with 3602R / SP3602 / 3419R
9.1Excellent
Show more
- 05
TML
Replacement Hot Tap Cartridge Ceramic Valve 28 Teeth x 52mm Height Compatible with SMR San Marco 3602R / (3419R)
Main highlights- Single Quarter Turn Valves (Clockwise open)
- See full Product drawing for full dimensions
- Premium Quality
- Brass screws included (M4)
- 28 Teeth 7.8mm Diameter spline Compatible with 3602R / SP3602 / 3419R
9.0Excellent
Show more
- 06TML
Replacement Brass ceramic cartridge faucet valves Quarter turn insert gland FITS FRANKE 28 spline (PAIR hot /cold)
Main highlights- You will receive a PAIR of valves (one clockwise and one anti-clockwise) to repair one set of taps
- Suitable for Replacing Franke valves with 18 teeth on the spline and with the threaded collar
- Other sizes are available to fit Franke other models - see other items
- Can't find the right size? Contact us for advice - We are available for Technical help and support
- BSP 1/2" - Please check dimensions in photos carefully to ensure compatibility with your model
8.9Very Good
Show more
- 07Generic
28mm Ceramic Faucet Cartridge Replacement, Single Hangle Cold and Hot Mixer Valve, 28mm Shower Cartridges for Kitchen & Bathroom Faucets, Drip-Free
Main highlights- 5. Buy With Confidence: If you have any questions about 28mm ceramic disc cartridge, feel free to contact us for a replacement or refund. We’re happy to help!
- 4. Easy Installation: Tools needed: Allen wrench and adjustable wrench. 1. Remove the cap and use Allen wrench to take off the handle 2. Remove the old cartridge 3. Install the new cartridge 4. Test for leaks.
- 3. High Durbaility: 500,000-cycle tested under standard, with no deformation observed at 35 bar static water pressure. Silicone-rubber gaskets ensure drip-free performance.
- 2. 28mm Ceramic Faucet Cartridge: 28mm universal cartridge ensures a perfect fit for most single-handle faucets. Always measure your existing cartridge before ordering.
- 1. Faucet Cartridge Replacement: Stop leaks effortlessly with precision-machined ceramic discs. Compatible with single-handle kitchen, bathroom, shower, basin faucets.
8.8Very Good
Show more
- 08
TML
Carron Phoenix Alba, Bali, Dante Noir Spiral, Lucida, Tripure, Maya, Windsor Compatible Replacement Tap Cartridges Valves (Pair)
Main highlights- Tap Cartridges will repair a leak / drip from the end of the spout. If your tap is leaking from the bottom of the spout (where it joins the tap body) then cartridges will not solve a leak here. In this case you would need the spout O Ring repair kit.
- Your Carron Phoenix tap valve may come out together with its brass bush. This is a separate part and can be purchased separately if needed
- UK's Trusted Tap Cartridge Experts. Tap Magician Fully Compatible Pair of Ceramic Disc Cartridges (Quarter Turn). Codes may be known by 1427R / SP1427 / 3561R/ SP3561 S1022 / S1023 / 4276R Original cartridge may have SMR / San Marco Stamped on the body of the cartridge.
- Guaranteed Premium Quality. Fully Compatible. Designed for Long Life use. 12 Month Warranty. No quibble returns.
8.6Very Good
Show more
- 09partszen
partszen TPI Tap 1/2-28 with Die Set HSS 1/2" x 28 22LR 223 5.56 9mm UNEF High Speed Steel Right Hand Thread Tap Tool Taps Dies
Main highlights- Package includes: 1 x 1/2"-28 Tap, 1 x 1/2"-28 Die
- Fitment for: 9mm, 223, 5.56, 22lr, etc
- Fitment for: 1/2-28 TPI Tap and Die Set HSS 1/2" x 28 22LR
- Fitment for carbon steel, alloy steel and cast iron, such as through hole processing
8.4Good
Show more
- 10uxcell
uxcell G1/8-28 Pipe Thread Tap, Machine Threading Tap Right Hand, HSS Uncoated Straight Flute, H2 Tolerance
Main highlights- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- Tap Size: G1/8-28 pipe thread, H2 tolerance. Straight flute design, downward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
8.3Good
Show more
