Advertising Disclosure
10 Best tap bauer in Canada
Best Choice01UonecnUonecn for Anton Bauer D-Tap to Hirose 12 Pin Female Power Cable for Any 1/3" 1/2" 2/3" Angenieux Lens
Main highlights- This cable was designed specifically to power 2/3" lenses (B4) mounted for Panasonic AF100, GH1 - GH4, and other DSLR cameras
- This cable length is 12 inches(Coiled length).
- Source power from Anton Bauer Gold Plates, V-Mount Plates and from cameras and batteries with on-board d-tap or p-tap outputs.
- Power any 1/3" 1/2" 2/3" for Angenieux Schneider lens Servo having a cable with a Hirose 12 Pin Male end.
- Plug A: D-tap male connector; Plug B: Hirose 12 pin female connector
9.7Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money02Alvin's CablesAlvin's Cables D-Tap Male to 4 Port Dtap Female Coiled Splitter Cable for ARRI Anton Bauer V-Mount Battery RED Cameras TILTA Steadicam IDX Battery
Main highlights- With this Power Tap Receptacle, you can expand any Power Tap to accommodate up to four separate.
- Plug A: D-Tap male connector; Plug B: 4-port female Coiled Splitter. Max work current: 10 amp max total.
- Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery.
- Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please let us know at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.
- Cable Length: 30cm, stretchable length: 91cm. We can customize cables with other length, please send a message to us if you need.
9.6Exceptional
Show more
- 03Alvin's Cables
Alvin’s Cables D-Tap Male to Dtap Female Extension Cable for DSLR Rig Anton Bauer Battery 1M
Main highlights- Plug B: D-tap Female.
- Plug A: D-tap Male.
- For DSLR Rig Anton Bauer Battery. Allow extra 3ft length to power your equipment.
- Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please let us know if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.
- Cable Length: 1M(39.4 inches). We can customize cables with other length, please send a message to us before making the order.
9.4Excellent
Show more
- 04Alvin's Cables
Alvin's Cables D-tap to DC Power Cable 12V 5.5mm×2.1mm DC Coiled Cable for Atomos Shogun, Ikan Monitor, Blackmagic Video Assist, SmallHD Indie 7, Right Angle DC
Main highlights- The Max length of cable is about 1m (about 39'' ),the Unstretched length is about 58cm (22.8'').
- Source power from Anton Bauer Gold Mount batteries, Gold Mount Plates, V Mount batteries and from cameras with on-board d-tap output
- Provides power to Atomos Shogun, Ikan Monitor, Blackmagic Video Assist, SmallHD Indie 7 Monitor, KiPRO LCD Monitor, Lectrosonic, Lowel Blender LED, PowerTap-Lectro and other devices.
- Center positive polarity. Cord OD is 5.5mm with 0.5 square mm Copper wire
- Anton Bauer Power Tap D-Tap to 2.1*5.5mm DC 12v Right Angle Cable
9.2Excellent
Show more
- 05YCYUYUFUNS
YCYUYUFUNS Dtap Y Cable, Dtap Male to Dual Female Extension Power Cord D-tap to P-tap Splitter Cable for Anton V-Mount Battery & BMPCC4K Battery
Main highlights- The connector are dtap male to dual dtap female.
- Dtap power extension cord is made of premium PVC external pure copper material internal, featuring stable transmission and better electrical conductivity.
- Dtap Y cable design can be used to power your two cameras simultaneously.
- D Tap extension power cable for Anton Bauer V-Mount Battery and BMPCC4K Camera.
- Cable length: 7.87in (20cm). more length required, please contact with us.
8.9Very Good
Show more
- 06FocusFoto
FocusFoto Battery Power Supply Adapter Plate with D-tap Output for ANT0N Bauer Gold Mount Battery for Panasonic DSLR Camera Camcorder
Main highlights- This Battery Adapter Plate can be mounted on to the back of LCD monitor / Power supply station / steadicam / power plate.
- Package Content: 1 * ANT0N Bauer Gold Mount Battery Camera Adapter Plate; 4 * Screw
- Main material: ABS ; Dimension:3.0" X 4.7" ; Net Weight: 69g
- It is for PANAS0NIC / ANT0N Bauer battery with ANT0N Bauer Gold Mount and D-tap connector input. DIYers' parts.
- D-tap connector port
8.8Very Good
Show more
- 07Alvin's Cables
Alvin's Cables D-tap to DC Power Cable for Atomos Shogun, SmallHD Indie 7 Monitor, Blackmagic Video Assist, 12V 5.5mm×2.1mm DC Cable 60cm| 23.6in
10% OffMain highlights- Source power from Anton Bauer Gold Mount batteries, Gold Mount Plates, V Mount batteries and from cameras with on-board d-tap output
- Please Note: there is no voltage regulator in the cable, so the input is same as the output, please make sure your battery power output is within the input range of your device.
- Center positive polarity. Plug A: straight 5.5*2.1mm DC, Plug B: Standard D-tap Male.
- Cable Length: 60CM (23.6inches). We can customize cables with other length, please send a message to us before making the order.
- Adapter cable allows you to power for Blackmagic Design Video Assist, for Atomos Ninja/Shogun/Shinobi Monitor, for SmallHD 702/Indie 7 Monitor, for Hollyland Mars 4K Wireless transmission system, for Feelworld F6 Plus/LUT7S Monitor, Portkeys PT5/PT5 II/PT6/LH7P/LH7H Monitor.
8.6Very Good
Show more
- 08Alvin's Cables
Alvin's Cables Power Tap D-Tap to 2.1 DC 12V Right Angle Cable for Blackmagic Design Video Assist, Atomos Shogun, SmallHD 702 Monitor 60cm|23.6in
10% OffMain highlights- This d-tap to 5.5mm dc power cable allows you to power for Blackmagic Design Video Assist, for Atomos Ninja/Shogun/Shinobi Monitor, for SmallHD 702/Indie 7 Monitor, for Hollyland Mars 4K Wireless transmission system, for Feelworld F6 Plus/LUT7S Monitor, Portkeys PT5/PT5 II/PT6/LH7P/LH7H Monitor.
- Please Note: there is no voltage regulator in the cable, so the input is same as the output, please make sure your battery power output is within the input range of your device.
- Center positive polarity. Plug A: Right angle 5.5*2.1mm DC, Plug B: Standard D-tap Male.
- Cable Length: 60CM (23.6inches). We can customize cables with other length, please send a message to us before making the order.
- Alvin's D tap to 12v cable source power from Anton Bauer Gold Mount batteries, Gold Mount Plates, V Mount batteries and from cameras with on-board d-tap output
8.4Good
Show more
- 09SALALIS
Plastic Battery Adapter Plate with D Tap Connector for Panasonic & Anton Bauer Batteries, Camera Power Supply Accessory
Main highlights- 【SUITABLE FOR】 Battery camera adapter plate is for / battery with Gold Mount and D-tap connector input.
- 【STABLE CONNECTION】The ready wires and screws provide a secure and stable connection and fixation.
- 【SAFE TO USE】Gold mount battery camera adapter plate's plastic shell is tough and durable, not easy to be damaged, safe to use.
- 【INSTALLATION LOCATION】Camera battery adapter plate can be installed onto the back of LCD monitor / Power supply station / steadicam / power plate.
- 【EASY TO ASSEMBLE】Battery adapter plate for is easy to assembly if knowing professional installation instructions.
8.2Good
Show more
- 10MCCAMSTORE
D-tap Male to Female P-tap Extension Power Cable Compatible with Anton-Bauer DSLR Rig IDX V-Mount Gold Mount Battery ARRI Red Camera (D-tap Male to Female, 5ft)
Main highlights- Versatile D-Tap Extension Cable: This D-tap Extension Power Cable Compatible with Anton-Bauer DSLR Rig IDX V-Mount Gold Mount Battery to ARRI /Red /DSLR Rig/ Hawk woods Camera Photography, Monitor, Sound Record Devices
- Reliable Performance: Each cable is pre-tested to avoid short circuits and defects. Features standard D-Tap Male to Female connectors for secure power delivery
- Please Note: there is no voltage regulator in the cable, so the input is same as the output, please make sure your battery power output is the same as the input range of your device, 11~17V 10A (Max).
- Excellent Customer Support: 1-year guarantee with prompt replacements for defective items. Contact us for custom lengths or issues. Perfect for filmmakers using DSLR rigs or professional battery systems
- CABLE SPECIFIC: Plug A: D-tap 2 Pin Male Connector. / Plug B: P-tap 2 Ping Female Connector.. Cable length: 80cm (about 31.5 inches) default, 150cm (59 inches) / coiled cable(about 67 inches max) available, other length can be customized, please send message to confirm before place order
8.0Good
Show more
