Advertising Disclosure
10 Best spiral flute taps in Canada
Best Choice01Sowa ToolSowa Tool 1/2"-13 Spiral Flute Tap – HSSE-V3, Yellow Ring, UNC Thread, High Performance for Alloy & Stainless Steel, Machine Tap for Blind Holes
Main highlights- Yellow ring identification suitable for steels & other materials up to 35HRC (steel and alloy materials)
- Spiral flute design ideal for blind hole tapping, pulls chips upward to prevent clogging
- Precision-cut UNC thread size: 1/2"-13 for accurate and consistent threading
- Made from HSSE-V3 high-speed steel for increased durability and heat resistance
- Engineered for high-speed CNC machines in industrial environments
9.7Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02uxcell
uxcell Spiral Flute Thread Taps 1/2-13 UNC H2 Machine Threading Tap Bit, Nitrided Coated Screw Tapping Repair Tool, M2 High-Speed Steel (HSS6542)
Main highlights- Wide Applications: Spiral flute thread taps are suitable for machining blind or deep holes and sticky materials, and can be used for tapping stainless steel, aluminum, cast iron, alloy steel, ordinary steel, non-ferrous metals, hard plastics, etc. Suitable for drilling machines, tapping machines, CNC machine tools and milling machines. Used with tapping oil, you can get more precise threads and more durable taps.
- Warm Tip: It is recommended to use machine taps with tap chucks with overload protection. It is not recommended for manual use and electric drill tapping to avoid damage caused by uneven force. The tapping angle should be 90 degrees vertical. The harder the material, the slower the drilling speed.
- Strong & Durable: Taps are made of M2 high-speed steel (HSS6542), It has high hardness, toughness and good wear resistance, good cutting performance, and can produce clean and precise holes. Nitrided surface can improve corrosion resistance and hardness, reduce friction, and extend service life, making it very suitable for a wide range of applications.
- Spiral Flute Tap: Thread size: 1/2-13 UNC; thread length: 32mm / 1.26", overall length: 85mm / 3.35", square end size: 7mm / 0.28". H2 tolerance, right-hand thread cutting, with clean threads and sharp-cut cutting edges for fast and accurate tapping.
- Notable Features: Spiral flute design ensures smooth chip evacuation, prevents breakage, and enables more efficient tapping. The spiral tip of the tap helps guide it into the hole, reducing the torque required to turn it, and the flutes easily remove chips and debris from the hole and machine.
9.5Excellent
Show more
Value for Money03WolfrideWolfride 6Pcs Spiral Flute Tap Set HSS Machine Screw Taps SAE Thread Tapping Tool Blue Coated Spiral Taps Drill Bits 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC
Main highlights- Spiral Flute Design: The spiral flute ensures smooth chip removal, reducing the risk of breakage and clogging, making it ideal for precise tapping, especially in blind holes and softer material
- Screw Thread Tapping Tool: Compatible with hand tap wrenches, drill presses, CNC machines, and more, these taps provide fast, precision threading in materials like aluminum, mild steel, wood, and plastic
- Precision Thread Cutting: Engineered for accurate and clean threading, these taps deliver clear, burr-free threads for strong and reliable screw connections in every application
- HSS Machine Screw Taps: Made of high-speed steel with blue coated, features high hardness, wear, and heat resistance
- 6 Different SAE Size Screw Taps: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, 1/4-20NC, covering a wide range of threading needs
9.4Excellent
Show more
- 04LEONTOOL
LEONTOOL Titanium Combination Drill and Taps Bit Set, 1/4" Hex Shank HSS Spiral Flute Tap Set SAE 6-32NC 8-32NC 10-32NC 10-24NC 12-24NC 1/4-20NC Screw Tapping Bit for Drilling Tapping Countersinking
Main highlights- Warm Notice: Please apply some lubricant to the drill bit before use, and drill vertically and slowly when you begin, to prevent fracturing in the hole.
- Package Details: The titanium spiral flute tap set includes 6 drill tap bits in SAE size 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick change shank, fit for electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines. Comes with a portable storage box for easy storage.
- Easy to Use: Each tap drill has its size marks for easy identification. A tapered end on hex shank can prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
- Construction: The machine screw tap set is made of HSS 4341, which can ensure sharp, fast execution with high strength and efficiency. The surface is plated with titanium, which greatly improves the cutting performance of the drill, is more wear-resistant and provides long-lasting performance.
- 3 in 1 Mutitool: Just need 1 operation for hole drilling, tapping, deburring and countersinking on copper, brass, aluminum, sheet metal,wood and plastic,etc. No pre-tapping or cleaning required for fast, mess-free results.
9.3Excellent
Show more
- 05uxcell
uxcell M2 x 0.4 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Main highlights- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- Tap Size: M2 x 0.4 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Applications: Suitable for processing holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
9.2Excellent
Show more
- 06Rocaris
Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
Main highlights- sticky materials processing.
- Spiral groove is conducive to remove crumbs, not easily broken tap.
- Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
- High hardness, fast cutting, wear high temperature.
9.0Excellent
Show more
- 07uxcell
uxcell Spiral Flute Thread Taps 5/16-18 BSW H2 Machine Threading Tap Bit, Nitrided Coated Screw Tapping Repair Tool, M2 High-Speed Steel (HSS6542)
Main highlights- Wide Applications: Spiral flute thread taps are suitable for machining blind or deep holes and sticky materials, and can be used for tapping stainless steel, aluminum, cast iron, alloy steel, ordinary steel, non-ferrous metals, hard plastics, etc. Suitable for drilling machines, tapping machines, CNC machine tools and milling machines. Used with tapping oil, you can get more precise threads and more durable taps.
- Warm Tip: It is recommended to use machine taps with tap chucks with overload protection. It is not recommended for manual use and electric drill tapping to avoid damage caused by uneven force. The tapping angle should be 90 degrees vertical. The harder the material, the slower the drilling speed.
- Strong & Durable: Taps are made of M2 high-speed steel (HSS6542), It has high hardness, toughness and good wear resistance, good cutting performance, and can produce clean and precise holes. Nitrided surface can improve corrosion resistance and hardness, reduce friction, and extend service life, making it very suitable for a wide range of applications.
- Spiral Flute Tap: Thread size: 5/16-18 BSW; thread length: 24mm / 0.94", overall length: 70mm / 2.76", square end size: 5mm / 0.2". H2 tolerance, right-hand thread cutting, with clean threads and sharp-cut cutting edges for fast and accurate tapping.
- Notable Features: Spiral flute design ensures smooth chip evacuation, prevents breakage, and enables more efficient tapping. The spiral tip of the tap helps guide it into the hole, reducing the torque required to turn it, and the flutes easily remove chips and debris from the hole and machine.
8.9Very Good
Show more
- 08uxcell
uxcell M3 x 0.5 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Main highlights- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- Tap Size: M3 x 0.5 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Applications: Suitable for processing holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
8.8Very Good
Show more
- 09Sowa Tool
Sowa Tool 5/16"-18 Spiral Flute Tap – HSSE-V3, Yellow Ring, UNC Thread, High Performance for Alloy & Stainless Steel, Machine Tap for Blind Holes
Main highlights- Yellow ring identification suitable for steels & other materials up to 35HRC (steel and alloy materials)
- Spiral flute design ideal for blind hole tapping, pulls chips upward to prevent clogging
- Precision-cut UNC thread size: 5/16"-18 for accurate and consistent threading
- Made from HSSE-V3 high-speed steel for increased durability and heat resistance
- Engineered for high-speed CNC machines in industrial environments
8.6Very Good
Show more
- 10uxcell
uxcell M8 x 1.25 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Main highlights- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- Tap Size: M8 x 1.25 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Applications: Suitable for processing holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
8.5Good
Show more
