Advertising Disclosure
10 Best special application pullers in Canada
Best Choice01MOTOCOCHEDent Puller Welder 110V Spot Welder Dent Puller 7 Welding Mode, Stud Welder Dent Repair Kit with Slide Hammer Dent Puller
Free ShippingMain highlights- [Upgraded Transformer] The current range of the transformer determines the size and tension of the weld joints in the sheet metal repair machine, which affects the quality of the repair and the efficiency of the work. Our spot welder dent puller is designed with a transformer that has low no-load current, low failure rate and high power factor.
- [Thermal Protection System] The weld dent remover tool is equipped with a heat sink on the side of the machine that will activate at 203°F/95°C to prevent potential short circuits and machine burnout
- [Smaller Spot Welds] Stud welder dent repair kit have a thickness of 0.024 to 0.047"/0.6 to 1.2mm on one side of the weld, which is smaller and ensures no damage to the backside metal coatings or painted surfaces, ensuring no damage to the back metal coating or paint surface compared to other dent pullers.
- [Packing List] We provide a portable tool kit with all the accessories of this equipment, the accessories include 1x main unit; 1x weld puller; 1x dent puller; 1x manual suction cup; 1x dual-purpose dielectric head; 1x six-jawed hook; 1x wrench; 1x round washer chuck; 1x pulling hook; 1x connector; 1x carbon rod connector; 2x carbon rods; 10 x triangular straight puller tabs; 10 x corrugated wire; 20 x Circular Washers; 20 x OT Spacers; 1x User Manual
- [Automatic Welding Mode] The spot welder dent puller can be switched to automatic control technology for automatic control of the current level, resulting in faster and more precise welding tasks.
- [7 Welding Modes] The dent puller weld erequipped with 7 default welding modes to adapt to different welding studs, easy to operate control panel.1,Triangular Meson Pull; 2,Round Gasket Welding; 3,Long Gasket Welding; 4,Wave Line Welding, 5,Stud Welding; 6,Carbon Rod To Close The Fire; 7,Single- Sided Spot Welding. Ideal for car enthusiasts and DIYers looking to tackle dent repairs at home or in their workshops with ease and confidence.
- [10 Power Levels] The spot welder dent puller power output is a key factor in welding and should be adjusted according to the thickness of the material to be welded, enabling you to tackle all common dent problem.
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Orion Motor Tech
Orion Motor Tech 2 in 1 Bushing Driver Tool & Bearing Press Kit, Complete Bushing & Bearing Service Kit with 2" and 3" Jaws, 5 Ton Capacity Bearing Separator, Heavy Duty Wheel Bearing Puller Tool Set
Free ShippingMain highlights- Wide Compatibility: Effortlessly remove large or small bearings on most vehicles with the bearing separator, while the bushing driver tool set covers sizes from 18 to 65 mm, plus 74 mm, ensuring compatibility with most cars, ATVs, and light trucks
- Engineered for Durability: Constructed from heavy-duty steel with corrosion-resistant coatings, our wheel bearing removal tool kit delivers exceptional strength and long-term durability, even under the toughest conditions
- Custom Case for Easy Storage: This bushing removal tool kit includes custom blow-molded cases for neat organization and convenient transport, keeping your tools safe and ready for use
- Comprehensive Tool Kit: This all-in-one tool kit includes a 14pc bearing puller set with two pair of jaws, 8 extension screws, and additional tools, along with a 52pc bushing removal kit including 49 bushing discs, a long handle shaft, and more
- 2-in-1 Bushing & Bearing Kit: Orion Motor Tech's 2-in-1 bushing and bearing service kit offers a comprehensive solution for your maintenance tasks, making it easy to handle bushings and seals, and to remove bearings, gears, pulleys, and steering wheels
9.7Exceptional
Show more
- 03Lisle
Lisle 58430 Shaft Type Seal Puller
Main highlights- Removes the seal without damage to the shaft
- Removes the seal without damage to the shaft
- Engage the adjustable hook behind the seal
- Brace the push rod against the engine head and push the handle to remove the seal
9.5Excellent
Show more
Value for Money04DUZFOREIDUZFOREI 8PCS Pick and Hook Set Puller Remover Oil Seal Puller O Ring Hook Tool with Rubber Handle for Removing Gaskets Springs Oil Seals
Free ShippingMain highlights- Package Included: The Pick and Hook Set comes with a total of 8 tools, 4 different types of hooks, each type includes 2 hooks, 45 degree hooks, full hooks, straight hooks and 90 degree hooks.
- Material: The Pick and Hook Set is made from chrome vanadium steel which is strong, corrosion and rust resistant, as well as hard wearing and has a long service life! A must-have set of tools for the home or repair shop.
- Function: The Pick and Hook Set is strong, well-made, and feature ergonomically designed rubberized grips that are non-slip and easy to grip, making it easy to hook and pick up any part or accessory you may need for a repair job.
- Fitment: The long and short shank hook pick set can be widely used in the repair and maintenance of automobiles, bicycles, motorcycles, electronic products and other machinery, especially suitable for disassembling and installing oil seals, O-rings, springs, suction rings, O-ring gaskets and other needs.
- Easy to Use: The Pick and Hook Set is very simple to use, apply it to the part you need to hook and hang and you are good to go.
9.4Excellent
Show more
- 05WEYI
Relay Puller Pliers, Angled tip Opening 100 mm Ergonomic Handle Fuse Puller Tool Quick disassembly No Damage to Vehicles
Free ShippingMain highlights- Wide Application: Relay and fuse pliers are designed for use on most domestic and imported vehicles, as well as many duty and industrial applications; this special plier tool will all help get the job done quickly.
- Thin Jaws and Sloped Tip: The thin jaw slides easily between tightly packed relays and fuses, while the angled tip snaps onto the bottom of the relay or fuse so you can gently pull the part out without damaging it.
- Simple to Operate: Just open the jaws to the necessary width so that the jaws are flush with each side of the relay you want to pull out; lightly press the offset handle and pull up to remove the relay.
- Material: Automobile relay pulling pliers are made of high quality metal, wear resistant and durable, and not easy to At the same time, the ergonomic handle is easy to grasp, making it a very practical auto repair tool.
- Easy Removal of Relays and Fuses: Use pulling pliers to quickly remove relays and fuses that are tightly mounted or hard to reach spaces; a must have tool for professional mechanics and car enthusiasts alike.
9.3Excellent
Show more
- 06YIJU
YIJU Seal Puller Oil Seal Puller Tool Length 30.5cm Multi-use Assembly Non Slip Handle Sturdy O-Ring Remover Seal Puller Hand Tool
Main highlights- Two size tips, reaches most seal applications.
- Removes grease seals time.
- Length: 30.5/12.01inch.
- Easy without scoring surfaces.
- Black oxide finish to resist .
9.2Excellent
Show more
- 0701 02 015
Auto Repair Tools, Steel Rustproof Portable Durable Grease Seal Puller with Dual Hook Tip Design for SUVs for Cars for Light Trucks
Free ShippingMain highlights- Wide Application: Two size tips are suitable for almost all sealing applications, professional seal puller tool apply for cars, SUVs, and light trucks etc.
- Special Design: With dual hook tips design and two sizes of hook tips, this oil seal puller is specially designed for oil and grease seals.
- High Quality Material: Oil seal puller is made of high quality steel material, high strength, not easy to rust, durable and have a long service time.
- High Efficiency: Seal puller can quickly and effectively remove automobile oil and grease seals without damaging the shell or bearing.
- Easy To Use: Simply insert one of the two hardened tips into the edge of the seal. The comfortable grip makes work easier and can improve your work efficiency.
9.1Excellent
Show more
- 08ReluxGo
ReluxGo Primary & Secondary Polaris Clutch Puller Removal Tool Fit for Polaris ATV 1985-2009 Replace 2870506 2870903 (OEM Standard Size)
Free ShippingMain highlights- WIDE APPLICATION: The Primary drive clutch puller tools fit for most of Polaris Models 1985-2016, Replace OEM 2870506 PP3078 15-878 30260; The Secondary drive clutch removal puller tool is suitable for Polaris ATV 1985 - 2009, Replaces OEM 2870903 PP3077 MMGZP065
- SPECIAL DESIGN: This Polaris clutch puller removal tool is design to pull out your cluth and reduce the risk damaging the threads; The thread design makes our clutch tool fit and release your primary clutch perfectly
- PREMIUM MATERIAL: This drive belt replacement kit is made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy and stability, corrosion resistant, wear resistant, with reliable use and long service life
- NOTE: Please verify your year, make sure the model in the product details before purchasing. Package Included: 1 x primary clutch puller remover tool; 1 x secondary drive clutch removel tool; 1 x gloves
- AFTER-SALES DESCRIPTION: If you have any questions about the purchased tool, please contact us in time, customer’s satisfaction is our top priority
8.9Very Good
Show more
- 09Generic
Crankshaft Seal Hook Tool, Automotive Oil Seal Puller, Shaft Seal Removal Tool, Shaft Type Seal Puller, Fulcrum Used as Cam and Crankshaft Seal Puller,for Cars SUVs Light Trucks (B)
Main highlights- PRO TIP FOR EFFICIENCY：Use a plastic bottle as a guide when installing new seals with this automotive oil seal puller. This trick ensures straight insertion, preventing distortion and streamlining your repair process for better results.
- PREVENT LEAKS & ENGINE WEAR：Our oil seal removal tool helps replace worn seals to stop oil leaks, overheating, and early engine damage. Protect your vehicle investment with this reliable engine seal hook remover that maintains peak performance.
- FOR PROS & DIY ENTHUSIASTS：Whether in a repair shop or your garage, this versatile engine seal hook remover is essential. Trusted by mechanics and hobbyists alike, it delivers convenience and reliability for any oil seal replacement job.
- DIY-FRIENDLY & COST-EFFECTIVE：This seal puller tool is perfect for home garages—no extra tools needed. Its simple design makes it budget-smart, letting DIYers tackle repairs without pricey shop visits. A must-have for cost-conscious car owners.
- CLEAN SAFE SEAL REMOVAL：This crankshaft seal hook tool is precision-designed for cars, SUVs, and light trucks, letting you remove crankshaft/camshaft seals without scratching surrounding parts. The automotive oil seal puller ensures a smooth, hassle-free repair every time.
8.8Very Good
Show more
- 10Himaweek
US Standard Olive Remover Puller Tool,Ferrule Puller for NPT 1/2” and 3/4” Compression Sleeve,Not Damage the Pipe, Compression Ring Removal Tool
18% OffMain highlights- Time-Saving Simplicity: Say goodbye to complex procedures with this Olive Puller Removal Tool. Leveraging the compression fitting's own locking nut, it delivers a simple yet effective olive removal process. Save precious time and avoid unnecessary frustration with this straightforward solution that streamlines your workflow.
- The Ultimate Convenience in Olive Removal: Experience the simplicity of removing compression rings with minimal effort. Attach the tool to the valve bolt, rotate the handle, and witness the seamless detachment of the compression ring. This tool is designed to safeguard your pipes from damage, ensuring the integrity of your plumbing system.
- Superior Longevity with Solid Brass: Crafted from premium solid brass, this tool is the epitome of durability. Resistant to wear and corrosion, it is built to offer years of dependable performance. Frequent use in challenging environments is no match for its robust construction, ensuring that it remains an indispensable part of your toolkit for the long haul.
- Professional Quality for Guaranteed Satisfaction: Whether you're a seasoned plumber or a hands-on DIY enthusiast, this tool is crafted to meet the highest standards of quality. It simplifies the olive removal process, allowing for quick, efficient, and safe work, thereby enhancing productivity and job satisfaction.
- Ferrule Puller Removal Tool: Ferrule Puller Tool Is A Compression Ring Plumbing Puller Tool That Is Suitable For Brass Pipes With Diameters Of Npt 1/2 Inch & Npt 3/4 Inches，Can Quick And Effective Removal Of Brass Nuts, Shut-Off Valves,Angle Stop Rings, Compression Joints Etc.
8.5Good
Show more
