Advertising Disclosure
10 Best solenoids in Canada
Best Choice01gradoraStarter Solenoid 12 V 4 Terminal 100 Amp Intermittent Duty Solenoid Relay SAZ4201GJ 7522
Free ShippingMain highlights- Widely used for hydraulic dump trailers, such as Load Trail, Parker Performance
- Replaces Part Number: Prestolite SAZ-4201GJ,SAZ-4201ER; Monarch/Bucher 7522, 07522
- It is suitable for power-on/power-off dump trailers, and can also replace the solenoid valve of the hydraulic leveling jack of the motorhome.
- Intermittent duty solenoid is made of tough plastic and durable copper and the coil roller is made of 180℃ copper wire.
- Caution: Always use a back-up wrench to hold the bottom nut when tightening
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Heschen
Heschen Solenoid Electromagnet, HS-1564B, DC12V 3A, 20mm Stroke, Force 60N, Push Pull Type, Open Frame, Linear Motion
Main highlights- Type: Push Pull Type
- Stroke: 20mm ; Force 60N
- Rated Voltage: DC12V; Rated Current: 3A
- Product Name: DC Solenoid Electromagnet; Model: HS-1564B
- Package Content : 1 x Electromagnet Solenoid
9.5Excellent
Show more
- 03VILLCASE
VILLCASE 3pcs Solenoid Electromagnet 12V Dc Push Pull Mini Actuator for Gaming Machines and Kids' Piggy Banks, Compact Design, Energy Efficient, Easy Installation, 1.45x0.51x0.43 Inch
Free ShippingMain highlights- Magnetic Solenoid: The M2 teeth on the side of the electromagnet are to install and fix the electromagnet
- Linear Solenoid: Please pay attention to the length of the screw during installation to avoid damaging the electromagnetic coil due to the screw
- Frame Solenoid Electromagnet: This mini solenoid does not distinguish between positive and negative poles, and completes the operation within 0.2 seconds of power-on
- Electromagnet Solenoid 12v: Mini push pull solenoid, open, linear motion, plunger spring return, DC electromagnet
- Electromagnet Linear Motion: Push pull Type, open frame, linear motion, plunger spring return, DC solenoid electromagnet
9.4Excellent
Show more
- 04Newdeli
Newdeli Max 200A Trombetta Continuous Solenoid Relay 3 Terminal Heavy Duty Winch Marine 24106 SPST Solenoid 12VDC
Free ShippingMain highlights- 【Specification】:3-pole battery isolation solenoid valve: Voltage: 12VDC; Working current: Below 80A Resistance: 14Ω; Capacity: 10.2W; Maximum transient flash current: 200Amp; Contact stud: 5/16-24 stud standard and Long; Mounting Holes: 5/16 x 19/32, 2-13/64 Center.
- 【Replaces Part Number】:This Continuous Duty Solenoid Relay Replaces # 934-1215-010, 9341215010, 934-1215-010-16, 934121501016, 1114240, 1114241, 1114208，1114218，1114534，1114547，1114538 ,97240-X, 70091714，Trombetta 974-1215-011-09，974-1215-011，98226-9.
- 【INSTIALL】：One side goes to Battery, opposite side to starter, top screw which is smaller goes to switch or key start only. It is already grounded internal.
- 【High Quality】:The coil uses 180 ℃ copper wire, the electromagnetic relay is made of high-quality components,the contact: normally open (NO), the galvanized outer layer and the inside of the canned coil, suitable for use in any environment,Sealed Unit Protects Solenoid From The Elements Helping Prevent Corrosion.
- 【Application】:Wiedly Used for Marine, Winch, Military Vehicles, Hydraulic Control Units, Golf Cart, Factory Machines. Attention: If it is the energizing circuit which is typically 16/18 Awg, suggest a 5amp fuse; If 10 Awg wire suggests 30 amp auto circuit breaker; If high output alternator, suggest an 8 AWG wire with a 50 Amp auto circuit breaker.
9.3Excellent
Show more
Value for Money05QINIZX4Pcs DC 12V Micro Push Pull Solenoid Electromagnet - Mini Linear Actuator Magnet Valve 4mm Stroke Open Frame - Linear Motion 5.5W 0.15N
Main highlights- Stroke : 4mm/0.157inch; Body Size : 1.02x0.39x0.31inch (Including prominent parts); Head Shaft Length: 0.35inch(The length of the thick head is 0.137inch); Head shaft diameter: 0.196inch(Head hole diameter: 0.07inch); Tail shaft diameter: 0.12inch; Cable Length : 230mm / 9.0inch (No distinction +/-); Body fixed hole diameter: M2 x4;
- Rated Voltage : DC 12V; Power: approx.5.5W; Push Pull Type; Load current 460mA; Coil Resistance: approx. 26ohm; Initial Thrust (pull): 0.15N~0.2N;
- Product Name : 12V Micro DC Solenoid Electromagnet; Material : Metal, Electric Magnets Electronic Parts;
- Package Content : 4 x Push Pull Type DC Solenoid Electromagnet; Per piece weight : 0.26oz;
- NOTE : Because of its small size and large working current, it generates a lot of heat and is not suitable for long-term power-on. It is recommended that the power-on time does not exceed 1 minute. Generally suitable for instant power-on use.
9.1Excellent
Show more
- 06MaySpare
Max 300A Heavy Duty Solenoid Relay Nickel-Plating for Golf Carts,Winch, Marine in Rush 12VDC
Free ShippingMain highlights- Resistance is 14Ω, Capacity is 10.2W, Contacts:Normally Open (NO)/ 12VDC WITH 2 COPPER POINT
- Replaces:70-111224,3635820, 1114208, 1114218, 1114223, 1114534, 1114547/ Bracket:Straight;Spst, One circuit: Off - On, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center
- Our Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment, And Avoid Rusting, Shining
- Note: Normally Make 80A as Working Current, Need Break 5 sec on, 50 min off -/ If u need a long working one, pls note us.
- Max Transient current can be 300A, but Continuous Working Current recommend under 150 Amp/ WARRANTY: Life Long Warranty and Free Return and Full Refund
8.9Very Good
Show more
- 07XINLIYA
XINLIYA SW1951C Car Starter Solenoid Relay, Vehicle Solenoid Relaying Switch Replacement, Electrical Auto Accessories, Compatible with F150, F250, F350, F450, F550, Escort, Bronco
Free ShippingMain highlights- Wide Range of Applications: The product is suitable for a wide range of vehicles, including F150, F250, F350, F450, F550, E150, E250, E350, Escort, Bronco, Mustang, Ranger and more. Measuring approximately 3.34×3.15×2.75 inches, the precise specifications are designed to fit well with the corresponding vehicle models and provide convenient maintenance for the vehicle starting system.
- Practical Configuration: 1 connector is included in the package, the maximum switching voltage is 24VAC, the maximum switching current is 1A, and the rated coil voltage is 5V DC. The clear configuration of the parameters meets the requirements of a wide range of electrical conditions. Compact size is easy to store for daily maintenance and emergency replacement, it is a powerful assistant for your car.
- High Quality Material: This SW1591C starter relay is carefully crafted with metal and plastic materials. The metal parts ensure good electrical conductivity and structural strength to ensure stable current transmission, while the plastic parts provide reliable insulation and protection against short circuits. The combination of these two materials provides the relay with excellent durability and stability for long-term use.
- Efficient Replacement: This starter relay can effectively replace old or damaged relays, avoiding cold start problems, inability to cycle off or inlet heater errors. With waterproof characteristics, it further enhances the safety and stability of use, ensures the normal operation of the vehicle starting system, and protects your travelling.
- Easy Installation: The product is easy to install with direct replacement. Simply locate the original relay position, remove the old relay and install the SW1591C starter relay in the corresponding interface and position. No complicated tools or specialised skills are required to complete the replacement, thus improving work efficiency.
8.7Very Good
Show more
- 08Newdeli
Newdeli Max 300A Continuous Duty Solenoid Relay Nickel-Plating for Golf Carts, Winch, Marine in Rush 12VDC
Free ShippingMain highlights- 【Specification】:Max 300a continuous duty solenoid relay: Voltage: 12VDC; Resistance: 14Ω; Capacity: 10.2W; Maximum transient flash current: 300Amp; but Continuous Working Current recommend under 150 Amp,Bracket:Straight;Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center.
- 【Replaces Part Number】:This Continuous Duty Solenoid Relay Replaces #70-111224，3635820，1114208，1114218，1114223，1114534，1114547.
- 【Note】: Normally Make 80A as Working Current, Need Break 5 sec on, 50 min off .
- 【High Quality】:The coil uses 180 ℃ copper wire, the electromagnetic relay is made of high-quality components,the contact: normally open (NO)/ 12VDC with 2 copper point. the Nickel-Plating outer layer and the inside of the canned coil, suitable for use in any environment,Sealed Unit Protects Solenoid From The Elements Helping Prevent Corrosion.
- 【Application】:Wiedly Used for Marine, Winch, Military Vehicles, Hydraulic Control Units, Golf Cart, Factory Machines.
8.6Very Good
Show more
- 09Kiro&Seeu
Kiro&Seeu DC 12V JF-0530B 300mA 5N/10mm Push Pull Type Frame Electromagnet Keepping Force 5N Travel 10mm Linear Solenoid
Free ShippingMain highlights- Stable temperature rise, can extend the life of the product and ensure good performance.
- Simple and reliable structure design.
- Low friction ensures high efficiency and long life.
- Easy to fix and connect the load.
- E buckle ring and rubber washer to quiet the operation of the solenoid valve.
8.5Good
Show more
- 10MaySpare
MaySpare Winch Motor Reversing Solenoid Switch Intermittent Duty Trombetta 214-1231-A11 6 Terminal 12VDC
Free ShippingMain highlights- Voltage: 12VDC, Surge Amps: 150 A; 75 Amps for 5 Minute/ DPDT Motor Reversing
- This solenoid is used to reverse polarity on Permanent Magnet winch motors with 2 terminal post.
- OEM Reference: Cole Hersee 24450, 24450BX / Trombetta: 214-1211A11, 214-1211A11-06, 214-1211A51, 214-1211A61, 214-1231A11, 2141211A11, 2141211A11-06, 2141211A51, 2141211A61, 2141231A11
- Note: This solenoid ONLY works with Permanent Magnet motors. Will not work with older style motors with copper wound fields.
- **Allow 5 minute cool down time after pushing solenoid to maximum limit!**
8.4Good
Show more
