Advertising Disclosure
10 Best Solenoid Valves - Holiday Sale
- Best Choice01Generalaire
General Filters, Inc. 990-53 Water Inlet Valve
Main highlights- This is a genuine oem replacement part
- General filters, inc.
- Easy to use
- Country of origin: United states
- Curious about how we select the top products for you? Explore How It Works
- Value for Money02Walmine
Walmine UHS24 Solenoid Valve,Universal Humidifier Valve Solenoid Replacement Kit Valves,24V
Free ShippingMain highlights- The product includes a compression nut that can be repaired with just a screwdriver and wrench for easy and simple installation.
- Replacement Part Numbers: Replacement for Aprilaire -4040, Replacement for General - 990-53, Replacement for Honeywell -32001639-002, Replacement for Skuttle - A01-0814-148, etc.
- Replacement Models: HE220, HE225, HE260, HE265, etc.
- Replacement Brands: Replacement for Aprilaire, Replacement for Honeywell, Replacement for GeneralAire , etc.
- Gifted accessories: 1 sealant tape (with red shell) with strong sealing performance and good toughness, suitable for most kinds of flexible water pipes, and used at the joint of pipe fittings to enhance the sealing performance of pipe joints.
- Be sure to check the product specifications before buying or using, and control the flow at the water supply valve, so that the valve cannot be fully opened, otherwise it will leak water during use.
- 03HFS
HFS(R) Electric Solenoid Valve Copper Normally Closed for Water Air Gas (110V AC 1/2IN NPT)
Free ShippingMain highlights- [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2. Working environment: water, air, compressed air and some stable gases.
- [SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '')
- [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use.
- [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working.
- [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve
- 04SNS
SNS AC110V 1/4" NPT Brass Electric Solenoid Valve Normally Closed Water, Air, Diesel 2W025-N08
Free ShippingMain highlights- Working temperature range: -5 ℃~85 ℃
- We have solenoids available in AC/DC and various size NPT threads as well
- It's applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.)
- High quality normally closed electric solenoid valve, for water, air or oil
- 2 way solenoid valve, 1/4" NPT port, brass body, AC110 volt
- 05QWORK
QWORK 1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed - 2 Pack Suitable for Water, Air, Gas, Fuel, and Oil with VITON Gasket
Free ShippingMain highlights- Seal: The valve is manufactured with most durable high-performance rubber material seals, resists high temperatures and aggressive chemicals.
- Port Size: 1/4" G Thread; Voltage: DC 12V; temperature range: 41-185°F, working pressure: water/oil 0-0.5 Mpa; air 0-0.7 Mpa; 2 Packs.
- Note: Quality normally closed electric solenoid valves for air, water or oil. This valve is not a continuous duty valve and should not be used continuously for more than 8 hours in a single cycle.
- Fast Response: This highly responsive valve will open and close in less than 1 second when activated, immediately open or close flow when energized or de-energized.
- Durable Construction: Made of industrial grade solid brass, corrosion resistant, high strength, temperature resistance, used for gasoline, diesel, kerosene, natural gas, air, etc.
- 06RIH
RIH Pneumatics Solenoid Valve 12V/24V/110V Single Coil Pilot-Operated Electric 2 Position 5 Way Connection Type (DC12V, 1/4" NPT)
Free ShippingMain highlights- 【Size】Outlet: 1/4"NPT; Inlet: 1/4"NPT; Exhaust: 1/8"NPT. We provide pneumatic connectors, which can be directly connected to 1/4 or 6mm air pipes; Voltage: DC12V; Working Pressure: 25~116°F The valve can work in the pressure range of 25 to 116 PSI.
- 【Heavy Duty】- The valve body is made of aluminum alloy to support stability and closed connection. The copper coil is durable, not easy to heat up when used, and has a longer service life. High-quality solenoid valve pilot head, sensitive response, response speed 4 times per second, stable performance.
- 【Function】- 2 Position 5 Port Solenoid Valve: The 5/2 port is a 5 port 2 position valve that injects fluid or air into one end of the double acting device and allows the other end to be vented.
- 【Accessories】 - We provide direct push fittings, which can be directly connected to 1/4 or 6.35mm OD air pipe. 2 mufflers for reducing dynamic noise or cleaning the exhaust of the air solenoid valve.
- 【5 WAYS】 - The 5/2-way valve has five ports and two states. Two ports (A and B) are connected to the controlled components. One port is used to supply pressurized air (port P), the remaining two ports are exhaust ports (ports S and R) and are connected to ports B and A, respectively.
- Caution! Excessive voltage can cause the product to short-circuit! Please check the product relative to the voltage critically!
- 07BlueStars
4040 Humidifier Solenoid Valve by BlueStars – Upgraded 24V Brass Water Valve (A2012-S150 A2012-S118) Replaces 400 500 600 700 600M 550 560 700M 760A 768 – Fits Aprilaire Whole House Humidifiers
Main highlights- 【Replace Part Numbers】 4040, GA4040, 52P90, A2012-S118, B2015-S51, B2015-S54, B2015-S58, B2015-S65, B2015-S85, B2035-S2, B2035-S5, B2035-S54, B2035-S55. (NOTE: Please check with your original part number before purchase!)
- 【Package Includes】 1 humidifier water solenoid (including a inline strainer, strainer, orifice, inline/outlet compression nut, ferrule).
- 【Easy Installation & High Quality】 Easy to swap out with wrenches and screwdriver. OEM-compliant quality and well-tested by the manufacturer. (NOTE:The black marks on the brass surface is a normal phenomenon in the process of hot working and does not affect the use.Any problem, please feel free to contact us, we would help you asap.)
- 【Compatible with】 Aprilaire Whole House Humidifier Models 400, 400M, 500, 500M, 600, 600M, 558, 550A, 550, 568, 560A, 560, 700, 700M, 768, 760A, 760, etc humidifiers.
- 【Application】 The 24 volt solenoid valve regulates the amount of water that enters the humidifier, ensuring that the right amount of humidity is released into the air each time it turns on.
- 100% LIFETIME PROTECTION: Enjoy reliable performance with our lifetime protection, ensuring that your product will always be covered for any defects or issues that may arise.
- 08DIGITEN
DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed
Free ShippingMain highlights- Working pressure:0.02-0.8Mpa.
- Turn on water when system start;and cut off water when system stop.
- Rated power:4.8W.
- It will become hot when it works because there are so many coils inside. It’s normal and safe phenomenon. The highest working temperature of this product reaches 60℃.
- DC 12V 1/4" Quick connect Solenoid valve.
- 09U.S. Solid
U.S. Solid 1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve
Free Shipping - 10bstinay
Bstinay Metal 24V Electric Solenoid Valve UHS24 Replacement Humidifier Solenoid Valve Humidifier Parts with Tape Screw
Free ShippingMain highlights- The humidifier maybe makes noise Solution: Open the back cover of the humidifier and remove the small fan, then add some lubricating oil, or replace it with a new small fan
- Simple Installation: The product includes a compression nut, which can be repaired with just a screwdriver and a wrench, and the installation is simple and convenient. Note: During installation, be sure to align and tighten the screw thread of the connection to prevent water leakage.
- Replacement: Humidifier solenoid valve is used to replace OEM solenoid valve.The joint is made of solid brass material, solid and not easy to rust.Description of the product that controls the flow of water in and out: Mainly when your motor is working, the water will flow out. At this time, you cannot control the size of the water flow and the speed of the water flow. When your motor is turned off, the water flow will gradually stop flowing out and you cannot control the water flow. size and speed
- Note: The reasons for water leakage after the valve is installed: (1) The installation accessories are not tightened, and waterproof tape is required (the product comes with it, no need to buy it); (2) The valve is installed in the wrong direction; if you encounter problems during the installation process, please Contact us promptly
- Compatibility: Compatible brands: Replacement for Aprilaire, replacement for Honeywell, replacement for GeneralAire and most famous brands. Applicable models: Replacement for HE220, replacement for HE225, replacement for HE260, replacement for HE265, etc.; Replacement part numbers: Replacement for Aprilaire -4040, replacement for General - 990-53, replacement for Honeywell -32001639-002, replacement for Skuttle - A01-0814-148 etc.
- Adjustable Water Flow Valve: The humidifier solenoid valve can control the amount of water entering the humidifier so that proper humidity can be maintained throughout the home.
