Advertising Disclosure
10 Best relay control module in Canada
Best Choice01MSDMSD Relay Control Module 7566-4
Main highlights- Removable cover for easy accessibility
- Low profile JCASE fuses provide ample protection in case of a short
- LED status indicators, show you which channel is triggered at a glance
- Independent 40A outputs, to supply power to most aftermarket fuel pumps and electric fans
- Configurable single-wire activation with Ground (-) input or 12V (+) input, with removal of the Tie-Bar
- 7V to 20V supply to fit a wide variety of applications
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Weasch
Weasch Forward and Reverse Relay Module, 12V 10A Pre-Wired with LED Light, for Motor/Linear Actuator, Reversing Relay Module
Main highlights- This reversing relay module adopts a pre-wired design, and the wires are connected in different colors, which is easy to distinguish and connect. Control line (White, Black, Yellow) 20AWG Output line (Red, Black) 16AWG
- This Forward and Reverse Relay Module with indicating LED, forward status lighting red, reverse lighting green. When the control switch is not turned on, the module does not consume electric energy
- This 12V reversing relay module can power reversing motor device, Suitable for applications where reverse motion is required
- Operating Voltage: 12V DC; Rated current 10 Amp
- Both momentary action (self-resetting) switches and alternating action (self-locking) switches are supported. You can choose the appropriate switch according to your needs
9.7Exceptional
Show more
Value for Money03Tyenaza1 Channel Relay Module Control Board with Optocoupler Isolation High and Low Level Trigger (5V)
Main highlights- Universal Interface : All interfaces can be provided through directly connected terminal leads since the humanized interface design, Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- Load Range : NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- High Compatibility : The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, ARM, Raspberry Pi, MSP430, TTL logic etc)
- Fault-tolerant Design : The relay will not operate even if the control line is disconnected.
- Control Devices : The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
9.6Exceptional
Show more
- 04ELEGOO
ELEGOO 8 Channel DC 5V Relay Module with Optocoupler for Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi
Main highlights- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
- The link of tutorial: bit.ly/3U1Gy56
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control
- Standard interface that can be controlled directly by microcontroller (UNO, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Notice: The input signal trigger mode is low level effective mode which ‘closes’ the normally open (NO) switch at low level input. The advantages of low level drive, the system power reset, the load will not work, high security.
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- 5V 8-Channel Relay interface board, each one needs 15-20mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
9.5Excellent
Show more
- 05Valefod
[2-Pack] DC 5V Relay Module 2-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger
Main highlights- 【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- 【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- 【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Pi, MSP430, TTL logic etc).
- 【Fault-tolerant Design】The relay will not operate even if the control line is disconnected.
- 【Control Devices】The 2-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
9.3Excellent
Show more
- 06Walfront
2 Channel 12V Relay Module with Optocoupler Isolation High/Low Level Trigger Control Board for Arduino ESP32 DIY Projects (12V)
Main highlights- STRONG DRIVING ABILITY: Using SMT optocoupler isolation, it has strong driving ability and current is 5mA.
- SCREW FIXED EASY MOUNT: Modules can be triggered by setting high or low levels through wire jumper. Equipped with 4 fixed screw holes, easy to install.
- HIGH-QUALITY RELAYS: The module adopts high-quality relays with normal interface and maximum load: AC 250V/10A, DC 30V/10A.
- HIGH-QUALITY RELAYS: The module adopts high-quality relays with normal interface and maximum load: AC 250V/10A, DC 30V/10A.
- FAULT-TOLERANT DESIGN: Fault-tolerant design, even if the control line is broken, the relay will not move.
9.1Excellent
Show more
- 07Valefod
[2-Pack] DC 12V Relay Module 2-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger
Main highlights- 【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- 【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- 【High Compatibility】The relay module can be controlled directly by 12V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Pi, MSP430, TTL logic etc).
- 【Fault-tolerant Design】The relay will not operate even if the control line is disconnected.
- 【Control Devices】The 2-channel relay module uses genuine high quality DC12V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
8.9Very Good
Show more
- 08Zopsc
LCUS-1 USB Relay Module 5V Intelligent Smart Control Relay Module with Overcurrent and Relay Diode Freewheel
Main highlights- Onboard power LED and relay status LED
- Onboard high performance microcontroller chip
- Onboard CH340 USB Control Chip
- On-board 5V, 10A/250VAC, 10A/30VDC relay, long life of relay can be continuously sucked 100,000 times
- Module with overcurrent and relay diode freewheel
8.7Very Good
Show more
- 09QIACHIP
QIACHIP DC 12V 1CH 433Mhz RF Wireless Relay Remote Control Light Momentary Switch Transmitter with Receiver (1relays)
Main highlights- The rf relay adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
- The receiving module provides high signal sensitivity at lower cost and resist interference for excellent stability.
- The programmable rf transmitter and receivers can be flexibly configured in quantity and in operating modes.
- QIACHIP The remote relay adopts RF technology, with long remote control distance and stable signal.
- It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.
8.4Good
Show more
- 10lekiliky
lekiliky 4 PCS Car Relays, 5-pin Relay Switch, 40A 12V Waterproof Car Relays, Replacement for Electric Cooling Fans, Motor Starters, Automotive Taillights, Boat Outboard Motor (Black)
Main highlights- Versatile Applications: The relay features a 5-pin design, making it suitable for various applications such as automotive power switches, vehicle lighting control, and motorcycle modifications. It can flexibly adapt to different circuit control requirements.
- Function: This relay set is designed for 12V voltage and can handle a maximum load of 40A, enabling it to reliably support the power needs of various electrical devices in automobiles and motorcycles by stabilizing the flow of larger currents in vehicle circuits.
- Flame-retardant: The housing is made of PA66 flame-retardant material, effectively resisting high temperatures and sparks, thereby reducing the risk of fire during overloads. The silver alloy contacts have excellent electrical conductivity, ensuring long-term reliability.
- Efficient Operation: The internal core component uses a wire with slower temperature rise and stronger magnetic force, enhancing the relay's operational efficiency. It can operate stably at low temperatures and features excellent conductivity. The anti-welding design of the contacts ensures a long service life.
- Easy to Use: The relay measures 1.1 " in length and 1.4 " in height. When using the automotive relay, simply insert it into the circuit and connect the wires. Installation and replacement are straightforward, saving time and making it convenient to carry.
8.3Good
Show more
