Advertising Disclosure
10 Best rear mudguard in Canada
Best Choice01Mucky NutzMucky Nutz, MugGuard, Rear - Rear Mudguard, Black
Main highlights- In short mode, it works mighty fine as an all-year-round guard. And when the weather turns to sh**, attach the extension for full-length protection.
- Engineered for maximum protection, functionality and durability, with minimum weight.
- Each MugGuard is made in the UK using 100% recycled plastic and comes with re-useable VELCRO fasteners, so you can attach it to your pride and joy with ease.
- Compatible with 26”, 27.5’’ & 29” wheel diameters and will fit most full suspension and hardtail bikes.
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Ass Savers
Ass Savers – Win Wing 2 Road - Black Dots, Rear Mudguard for Road Bikes with Black Wishbone, Tire Widths up to 35mm, Ultralight, Clip On, Easy Installation & Removal, Secure Mount, Swedish Design
Main highlights- WIN WING 2 with MAXIMUM PROTECTION AT MINIMUM WEIGHT: Win Wing 2 (with black wishbone) is the stronger, gentler, and darker version, designed optimally to shield only the upper rear quarter of the wheel, preventing sprays from reaching the critical areas of the rider. This design minimizes the amount of material used for construction, and thereby keeping the weight minimal. The mudguard has to be installed quite close to the wheel, with a target of 5-10 mm tire clearance for maximum coverage.
- SUSTAINABLE: The black blade is made from 80% recycled PP and the Win Wing has been designed for efficient shipping and easy recycling. Each component can be purchased separately, making repairing and upgrading convenient. The Win-Wing is 100% Made in Sweden in ISO 14001 certified factories.
- SECURE MOUNTING: Win Wing 2 Road is suitable for all road bikes with tire widths up to 35 mm. Choose from one of the three possible settings to match with the angle of your seat stays, and the one that will allow a horizontal or a tail-up position. Avoid a tail-down angle as this will reduce the efficiency of the fender. The straps are made from ultra-tough TPU and should be pulled as tight as you can comfortably do by hand. Review videos and instructions for best performance.
- DURABILITY: Win Wing has been designed with emphasis on sophisticated simplicity and careful choice of materials, making it virtually indestructible. With only four components (competitors use as much as 40 components) it's not that much that can go wrong. The glassfiber reinforced wishbone holder is both flexible and tough and the rubber straps are virtually indestructible. Well engineered design helps with transformation from the flat form to a functional mudguard using a pre-folding process.
- ANTI JAM, ANTI THEFT DESIGN: As sturdy as it is, the design of the Win-wing allows it to flex in case of an accident and it's constructed to not jam in case of large chunks of nature get stuck to your wheel. If you like to keep it attached to your bike permanently, the Win-Wing can be secured to your bike with a standard zip tie, through a designated slot, making it easier to resist for people with sticky fingers. If you experience that the mudguard is not stable, try to use the next hole.
9.5Excellent
Show more
- 03Taeku
Taeku Bike Fenders, Universal Adjustable Road BMX Mountain Bike Front Rear Mudguards Set for 20"/22"/24"/26" Bicycle Mud Guard (Black)
Main highlights- Universal - Taeku Bike Guards fit bicycle 20"/22"/24"/26"/700cc and are suitable for all types of mountain bikes, road bikes, touring bikes, racing bikes and more. We wish you a good ride, even if it rains.
- Linear design - this bike wing is practical, easy to clean and needs only a simple rinse to be as good as new. The screws are made of high-quality galvanised material and will not rust even after a long time. Not only does it look stylish, but the slim design makes it easy to ride. The different colours that match your favourite bike make your bike even more visible.
- Keep Clean - Bicycle mudguards are indispensable for riding in the mud or rain. While riding, the mudguard protects against dirt and prevents your back from getting wet from rain lifted off the wheels, so you can ride home in the rain without worries. It helps reduce wind resistance when riding on muddy roads.
- Easy to Fit - The Taeku mudguard flexes to fit the angle between the bike's tyres without coming loose, making it easy to fit and remove, lower the height between the wing and the tyre to keep more mud out; on wet roads, raise the end of the wing to the height of the tyre cutout to prevent all the rain from being carried upwards.
- Durable Material - Made of high compression PVC material, integrated moulding technology, with high toughness, lightweight yet high quality, with super durability, will not easily appear scratched or broken, even if accidentally bent or beaten, it will not be deformed, so that you can completely get rid of the consideration of buying wing again.
9.2Excellent
Show more
Value for Money04VeloGoVELOGO Bike Fenders 2 PartsBike Accessories-Universal Front and Rear Tire MudGuards Easy to Install for 24-26 inch/700CC Bikes
18% OffMain highlights- 【Quality Assurance】We provide top-notch after-sales service. For any inquiries about our product, please contact us promptly.
- 【Product Highlights】Arc design cuts air resistance. Rear mudguard's angle adjusts, blocking debris rebound. PP material is light, strong, flexible, rust-resistant, with a stylish look. Easy to install without tools, quick to disassemble. Manual angle adjustment for convenience.
- 【Product Details】Includes one front fender, one rear fender, and an installation component pack. Weighs 240g; dimensions: Front - 8.5*31cm (fits fork diameter 17-32mm), Rear - 9*39.5cm (fits seat post diameter 27.2-34.9mm). Material: PP. Colour: Black.
- 【Easy Operation】Simple tool-free installation and quick disassembly. Easily adjust the mudguard angle manually for convenience.
- 【Compatibility】Suitable for 24-26-inch bikes, including snow bikes, mountain bikes, road bikes, and off-road bikes.
8.9Very Good
Show more
- 05Mucky Nutz
Mucky Nutz, MugGuard, Short
Main highlights- Supplied with a Velcro roll for fastening, making it quick release and easily removed for transport on a bike rack / uplift if needed.
- Engineered for maximum protection, functionality and durability, with minimum weight.
- Developed to prevent clogging when shredding the sticky stuff and finished in a stealthy matt and gloss black; this is a premium looking mudguard that won't break the bank.
- Designed, developed and manufactured in the UK.
- Compatible with 26”, 27.5’’ & 29” wheel diameters and will fit most standard and boost suspension fork / tyre combinations up to 3”.
8.8Very Good
Show more
- 06Ass Savers
Ass Savers - Fendor Bendor - Rear Mudguard for Bicycles, Regular Size for Urban and Road Bikes, Tire Widths 23-35mm, Lightweight, Easy to Install, Excellent Coverage, Swedish Design, Black
Main highlights- UNIVERSAL FIT: FENDOR BENDOR fits all frames with standard seat stays. It's self supportive and doesn't require support from the brake bridge or the seat stays. It can also be mounted directly on a seat post (as low as possible for best effect). It will not fit if you have monostay frame or center pull brake. Regular is suitable for road tires with widths between 23-35 mm.
- PREFOLDING DESIGN AND EASY STORAGE: The scoring lines along the fender need to be folded hard in order to give the it the necessary rigidity and strength. Take extra care to fold down the outer edges to make sure your Fendor Bendor is functioning properly. The Fendor Bendor can always be folded back into a small package for storage in a bag or jersey pocket. FENDOR BENDOR is extremely light, weighing only 50 gm (0.11 lb).
- FRAME PROTECTION by 3M: FENDOR BENDORs come with upgraded frame protection stickers from 3M. A material originally developed to protect the helicopter propeller blades from the sand storms in the desert, it makes sure that no scratches will be made to your beloved bike by the FENDOR BENDOR.
- EASY, NO TOOL MOUNTING: With the newly developed attachment construction, FENDOR BENDOR Regular is now completely self supported and therefore possible to mount on bikes without the sideway support of the seat stays or the support of a brake bridge. You could also mount it above your caliper brake to avoid interference with the brake.
- DESIGNED FOR STREETS AND ROADS: FENDOR BENDOR Regular has been adapted to fit the smaller and more delicate tubing of road and urban bikes. It has a slightly slimmer profile than its predecessor that will look at home on everything from your vintage track bike to your hyper modern carbon road bike. It remains folded in two places to keep the compact folded state of the previous generation that easily slips into a jersey pocket or backpack. Made in Sweden, with durable, long lasting material.
8.7Very Good
Show more
- 07Akozon
Akozon Motorcycle Rear Mudguard, For SUR RON Rear Protector Carbon Fiber Pattern Wheel Tire Splash Proof For SUR RON Light Bee X S
Main highlights- STYLISH APPEARANCE: The motorcycle mudguard provides a fashionable design and outstanding carbon fiber appearance, giving your motorcycle a more dynamic look.
- STRONG : With its mudsplash feature, the motorcycle wheel mudguard enhances cleanliness by preventing mud and dirt pollution during rides.
- IMPACT RESISTANT: The motorcycle rear with ABS construction provides excellent to impact and wear. Keep your motorcycle clean and protected from mud and splashes.
- EASY TO INSTALL: The motorcycle rear protector comes with necessary mounting hardware, making the installation process quick and simple. No need for any modifications.
- APPLICABLE MODELS: The electric motorcycle rear wheel mudguard designed specifically replacement for SUR‑RON Light Bee XS. Upgrade your motorcycle with this high grade carbon fiber style rear mudguard.
8.6Very Good
Show more
- 08OVTSPO
Bike Fenders Front And Rear Adjustable Easy To Install Fit For 20"/22"/24"/26"/700cc MTB BMX Mountain Road Bicycle OVTSPO
Main highlights- Super pressure-resistant material : It is well made of super pressure-resistant PVC material. Will not crack or rust. Very soft and can be bent and whipped randomly.
- Stylish Streamlined Design : These bicycle fenders are easy to clean and most importantly, unbreakable. Not only do our fender sets look fashionable, but the streamlined design prevents bikes and motorcycles from falling out of the mud.
- Keep It Clean : A must-have for driving in the mud and rain. The fenders protect you from dirt while riding. The angle between the wing and the bike tire is adjustable. Helpful to reduce wind resistance on muddy roads.
- Fit The Bike Wheels : Our bicycle fenders are suitable for front and rear wheels from 20 to 26 inches. Our bicycle fenders are suitable for all types of mountain bikes, road bikes, touring bikes, and racing bikes.
- Easy To Install And Remove : Our mudguard allows you to flexibly adjust the angle between the mudguard and the bicycle tire without the need for repair tools. You can adjust the length and height of the bicycle fender as needed. Easy to install and remove
8.5Good
Show more
- 09Favuit
Bicycle Fenders Bike Mudguard Set Mountain Bike Front and Rear Mud Guard Adjustable Bike Fender Bicycle Cycling Tire Fenders Set for 20"/22"/24"/26" MTB Mountain Road Bike Riding
Main highlights- ️【Thicken and Widen Design】Bike Mudguard set designed with widen-half circle fend design,can effectively protect you from getting dirty when riding in the rain or muddy road,prevent the silt splash and away from mud and rainwater to keep dry and clean.The thicken material can prevent any kind of broken in any situation.Bicycle fenders rear /front are easy to clean.And the appearance of the mudguard is streamlined,a variety of colors to choose from to suit your preferences.
- ️【Super Anti- Pressure Material】Bike mud guard is made of high-quality, durable and environmentally friendly PP material,super tough and break resistant,won’t broken and rusted.bike fender is very soft and lightweight, and can be randomly bend and beat, but still keep the shape,adapt to all kinds of weather,and have a long service life,protects you from rain and dirt while riding effectively.
- ️【Suitable for Most Mountain Bikes】Bicycle Fenders mud flaps set is suitable for most kinds of bikes,generally applicable to 20 in/22in/24in/26in bicycles, like MTB,road bike,city bike and so on.Our products have been strictly inspected, please rest assured of our quality, you can rest assured to buy.Please contact us at any times if you have any problems.We are dedicated to providing excellent customer support and offering innovative, reliable products and services.
- ️【Easy Install and Remove】Bike fenders set including 2 main parts,Bike Mudguard rear and Bike Mudguard front.Adopt simple quick-release design,which is simple and convenient to disassemble and easy to fix,you can install and disassemble the bike fender with few minutes.The front and rear ends of the fenders are designed with advanced soft rubber arcs to improve the water blocking effect,better to reduce the wind resistance.Easily protect your bike away from mud and rainwater.
- ️【Adjustable Bike Fender Rear】The fender height for the rear wheels can be adjusted,no any repair tools required,easy to adjust angle between the fender and bike tire,you can adjust length and height of bike fender on your preference.Protect the fork stanchions and bridge of your bike from dirt and grime,a must for riding in mud or rain.Reduce the need for cleaning and servicing,enjoy your bike riding in ease.Don’t worry the weather any more.
8.3Good
Show more
- 10Hoypeyfiy
Hoypeyfiy Rear Seat Mudguard Fender Back Fender, Replacement for Sur Ron Light Bee X S S/X160 X260 Models
Main highlights- Protection: Effectively shields your motorcycle from road debris, keeping it clean and enhancing its overall lifespan
- Material: Constructed from high-quality PP plastic, this rear fender is lightweight yet strong, minimizing any additional weight on your motorcycle
- Flexibility: Designed with a certain degree of flexibility, this fender can absorb impacts, providing reliable protection during rides
- Fitment: Replacement for Sur Ron Light Bee X, Sur Ron Light Bee S, S/X160, X260 models
- Easy Installation: The back fender can be easily installed without the need for drilling or cutting, making it convenient for quick replacements
8.2Good
Show more
