Advertising Disclosure
10 Best rc servos parts in Canada
Best Choice01HOOYIJHOOYIJ 2 Pack High Torque 40KG Digital Servo, DS3240MG Full Metal Stainless Steel Gear Waterproof Steering RC Servo, for 1/8 1/10 Scale RC Car Crawler Buggy Truck Boat Control Angle 180°
Main highlights- [Wide Application]--Widely used in rc airplanes, helicopters,fixed wing, quadcopters, aircraft,,automobiles,glider, climbing cars, boats, robot arm and other diy electronic project ect. Also perfectly compatible with 1/8 1/10 baja crawler rc car buggy truck ect.
- [Package Included]--2 X DS3240MG 40KG Large Torque Digital Servo 180 Degree ; 2 X 25T Adjustable Metal Servo Arm ; 2 X Accessories Bag.
- [PWM Control System]--Controlled by pulse width modulation system. Pulse range is 500μs-2500μs. Control angle is 180 degree when pulse width 500μs-2500μs. So please make sure your controller pulse width can reach 2500μs.
- [High Quality and Performance]-- Equipped with high-precision stainless steel gear and potentiometers , high-resolution digital chip, waterproof rubber seals screws.,CNC aluminium middle shell. Low noise,high control accuracy, good linearity, fast response,smooth, stable,less wear and long life.
- [40KG Digital RC Servo]--DS3240 full metal stainless steel gear 40kg digital rc servo 180 Degree. High control accuracy, good linearity and fast response. Operating Voltage: 4.8-6.8 DC Volts ; Stall Torque (5V): 36kg/cm , Stall Torque (6.8V): 45kg/cm ; Speed : 0.2 sec/60°(5V) , 0.17 sec/60°(6.8V) ; Dead band: 3μs ; Control Angle: 180 Degree(500-2500μs).
9.7Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money02AideepenAideepen 35KG Servo High Torque RC Motor 4.8-8.4V Full Metal Gear for 1/8, 1/10, 1/12 RC Car with 25T Servo Horn (270°)
Main highlights- 【Upgraded Version】Our digital servo motor consists of military-grade precision carbon steel gear and Dual ball bearings,ensure stable performance, fast response, strong anti-interference ability,low noise.
- 【Large Torque&speed】 The operating voltage range is 4.8V~8.4V;32kg/cm~35kg/cm.Please check the power supply voltage and other parameters before use, if you need help, please contact us.
- 【High Rotation】This smart servo controllable angle range from 0° to 270°.With 32CM soft silicone wire,can rotate 360° after power off,perfect for robot joint activities.(PWM 500-2500μs)
- 【High Quality】CNC aluminium middle Shell and full metal gear enhance the heat dissipation, high precision, control is more delicate and smooth operation.
- 【Application】compatible with 1/8 and 1/10 scale crawler,truck,robotic arm,ship models,robotic arms,intelligent robots,and any application where standard servos are used,Is your great choice.
9.5Excellent
Show more
- 03Womaqu
Womaqu RC Car Accessories 5-Wire Digital Servo, Spare Parts RC Servo for 14331 14322
Main highlights- Parts Number: 14301-34-QHCA
9.3Excellent
Show more
- 04INJORA
INJORA INJS035 35KG High Torque Waterproof Digital Servo for SCX10 TRX4
Main highlights- Widely use -- Perfect for RC Car On-Road RC Touring Car Drift Car RC Plane Helicopter.
- Perfect performance -- Well-controlled, 90-120 degree rotation, exquisite part, ideal for RC Car fans.
- Large torque -- Maximum torque of this RC Servo can up to 35kg/cm. (6V)
- High precision RC Servo -- Upgraded version digital servo for RC model.
- Good Quality -- Made of high quality material, reinforced metal gears, stable and low-noise.
9.2Excellent
Show more
- 05Hosim
Hosim RC Car Servo X6-DJ01, Replacement Part for 1:10 X05 X06 RC Car
Main highlights- Used for Hosim RC Car X06 X05
- QTY:1
- Part No.:X6-DJ01
- Original Accessories, High Quality
- Name:Rudder
9.0Excellent
Show more
- 06HERCHR
RC Car Servo, 5 Wire Servo E9831 1/16 Digital Servo Motor Full Metal Gear Steering Servo RC Car Spare Parts for Truggy Short Course 1631 1651 1621
Main highlights- WIDE APPLICATION: The High Torque RC Servo is suitable for 1/16 Truggy, Short Course (RC car 1631, 1651, 1621) spare parts, also suitable for RC cars, robots, smart DIY, rigid wings, helicopters and other RC models.
- PRECISION POTENTIOMETER: the Digital Servo adopts precision potentiometer, high linearity and precision, stable, low noise, waterproof, stable performance, able to make your RC car drive smoothly.
- GOOD WORKMANSHIP: the RC Car Servo is made of high-quality materials, exquisite workmanship, smooth surface without obvious scratches, built-in brush motor and stable motherboard, precise angle without deviation, durable.
- EASY TO INSTALL: The Servo Motor is easy to install, small size, light weight, it will not affect the use of the RC car after installation, it is an ideal accessory for RC car, it can perfectly replace the old or bad parts of the RC car.
- ALL METAL GEARS: The 5 Wire Servos are equipped with all-metal gears for higher precision and much longer service life. There are also high quality gears equipped with double ball bearings for less noise and more stable torque.
8.9Very Good
Show more
- 07Hosim
Hosim RC Cars 3 Lines Digital RC Servo Steering Engine FY-DJ01 Accessories Spare Parts for 1:10 X08 X07 High Speed Brushless RC Cars Trucks,Original Replaceable Parts
Main highlights- Used for Hosim X08 X07 RC Cars
- Package: 1PCS
- No.:FY-DJ01
- Name:RC Servo Steering Engine FY-DJ01
- 100% New Original Accessories, Well made and durable
8.8Very Good
Show more
- 08
JetwoodJetwood Spare Parts RC Car Accessories 3-Wire Digital Servo, RC Servo for JC16EP
Main highlights- Max 20.5N cm in torque (2.1kgf. cm)
- 3-Wire Connector
8.7Very Good
Show more
- 09GOUP RC
GOUPRC 7KG RC Digital Micro Servo Metal Gear Servo with Servo Hron for TRX4 TRX6 SCX10 III 1/10 RC Crawler Car Upgrade Parts (Black 1 PC)
Main highlights- Upgrade: 7KG RC digital micro servo with servro horn for for the diff lock servo in the TRX-4 TRX-6 and a dig and shift servo for SCX10 III crawler car upgrade servo parts.
- Product Composition：7KG servo*1 , 25T servo horn*1.
- Note: Please purchase our exclusive servo mounts Perfect for TRX4M Servo 1/18 RC Crawler Upgrade, but does NOT match original servo base and servo arm. Please pay attention to see the size before ordering to buy, thank you very much for your purchase.
- IP66 Waterproofness: Can be used in excellent choice for the diff lock servo in the TRX-4 TRX-6 and SCX10 III. IP66 Waterproof design.
- Excellent Performance: Adopt Full metal texture digital micro servo with high sensitivity for lower noise and better stability.
8.6Very Good
Show more
- 10Miuzei
Miuzei 20KG Servo Motor High Torque Metal Gear for 1/10, 1/8 RC Car 1Pcs
Main highlights- Large Torque: it reacts quickly and the maximum torque is up to 22.8kg·cm (316.63oz·in) at 6.8V.
- High Performance: high quality aluminum gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servo, two functions are added, which can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 ℃ overheat protection
- Control System: change of pulse width. Pulse range 500usec - 2500usec for 0°- 270° (90°--1166usec, 180°--1833usec).
- Application Fields: suitable for airboats, cars, robots, intelligent DIY, also rigid wings, helicopters, KT, and other RC models.
- 270° Digital Servo: built-in brush motor and stable motherboard, precise angle without deviation.
8.5Good
Show more
