Advertising Disclosure
10 Best rated pool in Canada
- Best Choice01Hayward
Hayward H250FDN Universal H-Series 250,000 BTU Pool and Spa Heater, Natural Gas, Low Nox
Main highlights- The Hayward Universal H-Series 250,000 BTU Natural Gas Heater delivers premium heating performance for years of reliable, long-lasting comfort
- Low NOx emissions meet air quality standards in all low-NOx areas, ensuring low environmental impact
- Industry-leading hydraulic design reduces circulation pump run time to provide major energy savings
- Front-panel-only access and intuitive control pad provide easy operation, service and maintenance
- A durable cupro nickel heat exchanger offers exceptional protection against corrosion and premature failure caused by unbalanced water chemistry
- Curious about how we select the top products for you? Explore How It Works
- 02Frezon
Frezon The B129 56J C-Face 1-1/2 HP Full Rated Pool and Spa Pump Motor for wide range of pump models
Main highlights- This motor operates on both 115V and 230V power, allowing for flexible installation options depending on your pool or spa's power requirements. It has a dual voltage capability that enables it to operate on either voltage, making it easy to switch between them as needed.
- The B129 motor is designed to be long-lasting and reliable, with a corrosion-resistant and durable construction that ensures it can withstand harsh pool and spa environments. It features a high-quality ball bearing design that ensures smooth and quiet operation, and the motor's thermal overload protection ensures that it stays protected against overheating and other issues.
- The B129 motor features a 56J C-Face design, making it easy to install and compatible with a wide range of pump models. It has a powerful 1-1/2 horsepower rating, making it suitable for use in larger pool and spa systems. The motor is also full rated, ensuring that it delivers maximum performance and efficiency.
- The B129 56J C-Face 1-1/2 HP Full Rated Pool and Spa Pump Motor is a high-quality and reliable motor designed for use in pool and spa pumps. This motor is engineered to deliver excellent performance and durability, ensuring that your pool or spa remains clean and well-maintained for years to come.
- Own different test machines to design exact accurate parameter for our products.All items were tested for performance.
- Value for Money03XINSTCO
UST1102 1 Hp Swimming Pool Pump Motor Replacement for Century,A.O. Smith ,Hayward, Super II,Max-Flow Pump 115/230V Up-Rated Pool Motor with Seal Kit, Super Pump SP2607X10 56J Frame, 3450RPM
Main highlights- Wide Compatibility: This 1HP up-rated pool pump motor replacement is fit Century UST1102,Hayward Max Flow, Super Pump, Super II, Northstar, and Jacuzzi Magnum pump models, round flange design and suitable for home pools, public pools, resorts and hotels.
- Powerful Performance: UST1102 replacement motor with 1HP single-speed replacement pump motor, 3450 RPM, 115/230V dual voltage with 60Hz. It has strong and efficient performance.
- Package Including: This package includes one UST1102 ,SP2607X10 pool motor pump and 2 pool pump O ring seal repair and other replacement kit.
- High Quality: 1 hp pool pump motor is constructed corrosion-resistant outer shell ,copper coils, a stainless steel threaded shaft, sealed ball bearings for durability.
- Easy to Install: UST1102 pool motor has a simple wiring switch on the cover, without the need for professional laborers, you can do-it-yourself a new pool pump motor to get your pool up and running quickly.
- 04KAVIUS
UST1152 Pool Pump Motor and Seal Replacement Kit Pool Pump Motor 1.5 HP Up-Rated C Face 56J Frame Compatible with Hayward Super Max-Flow Northstar Jacuzzi Magnum Pumps
Main highlights- 【Wide Compatibility】Replacing part OE UST1152, this 1 1/2hp up-rated pool pump motor compatible with Hayward Jandy Jacuzzi swimming pool pumps, and also compatible with a range of common pump brands and models which requires a 56J frame motor, making it suitable for different types and sizes of pool pumps. This makes it an ideal choice for users
- 【Operational Principle】When connected to a power source, the electric motor converts electrical energy into magnetic energy, which produces a rotating magnetic field inside the motor. The speed of the rotating magnetic field equals the electric motor's speed. The revolving magnetic field then interacts with the motor's rotor, causing it to turn and transferring the power to the water pump impeller
- 【High Efficiency】The swimming pool pump motor is a high-efficiency motor designed for energy savings. Its efficiency allows it to provide continuous and powerful power to the pool pump, helping to produce greater flow and pressure in the pool, thereby improving pool performance and efficiency
- 【Customer Service】You bought this max flow pool pump motor in our store. We provide a 12-month manufacture service. We attach great importance to your satisfaction and strive to provide you with a good shopping experience. If you have any questions, don't hesitate to reach out to us, we will try our best to solve your issue within 24 hours
- 【1.5 Horsepower】The HST150 super pump motor has a 1 1/2 horsepower rating that offers more powerful output to drive pool pumps for normal operation. Its output is stable and can meet the performance expectations of pool pumps
- 05GELUOXI
GELUOXI UST1152 Swimming Pool Pump Motor 1.5 Horsepower Up-Rated Pool Pump for Century Motor Replacement for Hayward/Super Pump/Super II and Jacuzzi Magnum Pumps
Main highlights- 【REFERENCE PART NUMBER】: Swimming Pool Pump Motor -UST1152. Within 12 months, if you encounter any problems with this Pool Pump Motor, we will solve for you.
- 【PRODUCT SPECIFICATIONS】: UST1152 Pool Pump Motor. ①Thermally Protected: AUTO, ② AMPS: 9.3/18.6A, ③Frame: 56J, ④ Horsepower(HP): 1 1/2HP, ⑤ AMB: 50, ⑥SF: 1.0, ⑦HZ: 60, ⑧Volts: 115/230V, ⑨PRM: 3450.
- 【INSTALLATION INSTRUCTIONS】: 8. Connect the inlet and outlet pipes. After the connection is completed, pay attention to replenishing the water inlet pipes. Because this type of vane pump has poor self-priming ability, manual replenishment is required. In order to facilitate subsequent use, it is recommended to add a one-way valve to the water inlet to ensure that after the water pump stops, the water in the water inlet will not flow back into the swimming pool. It can be started directly next time without manual replenishment.
- 【INSTALLATION INSTRUCTIONS】: 7. After the installation is completed, do not connect the water pipes. First, connect the power supply to the motor and run it without load. Detect the no-load running current. If the current is lower than the nameplate current value, it is normal. If the current value is significantly higher than the nameplate current value, it needs to be disassembled and checked for wiring errors, installation interference, friction, etc. After checking, power on again.
- 【INSTALLATION INSTRUCTIONS】: 1. After arrival, check the product for any mechanical damage such as bumps or deformation. Then turn the motor shaft by hand to check whether the rotation is smooth. If there is obvious damage, the motor shaft is stuck or makes abnormal noise, do not assemble; 2. Compare the nameplate parameters of the old motor and the newly purchased motor, mainly compare the power (HP), voltage, and speed, and confirm that the three parameters are consistent before use; 3. Use a multimeter to confirm the power supply voltage
- 【INSTALLATION INSTRUCTIONS】4. Remove the junction box cover, and adjust the wiring to a wiring method that matches the power supply voltage according to the wiring diagram inside the junction box (refer to the wiring video on the website); 5. For motors marked with dual voltage on the motor nameplate, the factory default wiring is 230V. If there is only a single voltage on the nameplate, the value on the motor nameplate shall prevail. 6. When assembling pump, for products equipped with accessories, make sure the accessories are consistent with the original parts before assembly. During assembly process, confirm that the parts are installed in place without interference or friction.
- 【APPLICATION MODELS】: UST1152 Swimming Pool Pump Motor Replacement for Motor for Hayward -Max Flo, Super Pump, Super 11 Pump and Jacuzzi Magnum Pool Pump Motor.
- 06Ai-OUMLEEF
4PCS 51mm Pool Winterizing Expansion Plugs,Rated Rubber Anti-Freeze Pipe Plugs, Tight Sealing for Pool Skimmers/Returns, Winter Pool Fittings (2in) by Ai-OUMLEEF
Main highlights- Super Tight Sealing & High Elasticity: The rubber plug has maximum expandability, tightly seals pool pipes to prevent water entry and freezing damage, no leaks or pipe bursts in winter.
- Reusable : Corrosion-resistant rubber material, can be reused for many winters, easy to install and remove without damaging pool pipes, a cost-effective pool winter accessory.
- Rated Premium Quality: Made of high-quality cold-resistant rubber, anti-freeze and anti-crack, perfect for harsh winter, provides long-lasting sealing protection for your pool.
- Multi-Scene Use for Pools: Not only for pool winterizing, but also suitable for pool line pressure testing, leak detection and water stopping during pool equipment repairs, practical and versatile.
- 4PCS 51mm/2in Exact Fit : 4 pack expansion plugs with standard 51mm/2in size, perfectly fit most pool skimmers, returns and cleaner lines, one pack meets all your pool winterizing needs.
- 07US Motors
U.S. Motors Emerson 56J C-Flange Single Speed 3/4HP Full Rated Pool and Spa Motor ASB127
Main highlights- Electric Pump Motor
- 08US Motors
US Motors EZ48 Y-Frame Thru-Bolt 1-Speed 1HP Full Rated Pool and Spa Motor, 115V - 1 Horsepower
Main highlights- Operates on 115 volts
- It sports a 1081 design, with open drip proof modeling to prevent water entrance and damage.
- Easy installation with thru-bolt mounting and rigid base
- Bolts directly to existing PowerFlo LX volute
- 1 horsepower, 48 Frame motor
- 09KAVIUS
KAVIUS B2853 Pool Pump Motor 1 HP Up Rated Square Flange P56Y Frame 1.25 Service Factor 230/115 Volts 13.0/6.5 Max Amps 1.0hp Pump Motor B853 Compatible with Sta-Rite Jandy Superflo Whisperflo Pumps
Main highlights- 【WIDE COMPATIBILITY】Replacing Cen-tury/A.O.Smi-th B2853 | B853 | B2853V1 motor, KAVIUS 1.0hp up-rated 56Y frame square flange swimming pool pump motor is widely compatible with a range of common pump brands and models which requires a 56Y frame motor, making it suitable for different types and sizes of pool pumps. Please kindly check your pool pump specifications and OE carefully before purchasing
- 【EFFICIENT & ENERGY-SAVING】 Our high-efficiency square flange 56Y frame B2853V1 motor is meticulously crafted to slash energy costs, minimize hassle, and reduce noise levels to a whisper. Engineered with a heavy-duty aluminum cooling block and a run capacitor design, our pumps operate on a remarkable 1/3 less electricity compared to typical pool pumps, ensuring optimal efficiency without compromise
- 【CUSTOMER SERVICE】You bought this B853 Pool Pump Motor in our store, we'll provide a 12-month manufacture service. We attach great importance to your satisfaction and strive to provide you with a good shopping experience. If you have any questions about this product, don't hesitate to reach out to us, we will try our best to solve your issue within 24 hours
- 【COMPATIBLE POOL PUMPS】The B2853 pool pump motor compatible with Pen-tair Whisperflo, SuperFlo, Ultraflo, Challenger, Pinnacle, and Anthony AR2 Series Pumps; compatible with Sta-Rite Dura-Glas/Dura-Glas II, Maxi-Glas/Maxi-Glas II, Dyna-Glas/Dyna-Glas II, Dyna-Pro, Dyna Max, Max-E-Glas/Max-E-Glas II, Max-E-Pro, Super Max Pumps; compatible with Hayward TriStar and Max-Flo II pumps; compatible with Jandy SHPF/JHP Series Stealth Pumps, etc
- 【1.0 HORSEPOWER MOTOR SPECIFICATIONS】Voltage: 230/115V; Horsepower: 1.0HP up-rated; Power: 0.75 kW; Service Factor: 1.25; Speed: 3450 RPM; Max Amps: 13/6.5; Frame: 56Y; Frequency: 60 Hz; Ambient Temperature: 50 ℃; Thermal Protection: Thermally Protected; Electrical Type: Permanent Split Capacitor, Single Or Dual Voltage
- 10US Motors
U.S. Motors U.S Motors Emerson SPH25FL1 48 Y-Frame Thru-Bolt Single Speed 2-1/2HP Full-Rated Pool and Spa Motor, 10A 230V
Main highlights- Shaft Thread 3/8-16 UNC 2A RH
- Class F Insulated
- 50 Degrees Celsius Ambient
- 3 Oft.Clock Conduit
- 1081, 1563 and 1795 Design
