Advertising Disclosure
10 Best pneumatic mufflers in Canada
Best Choice01MECCANIXITYMECCANIXITY 8PCS Pneumatic Exhaust Muffler, 3/8" NPT Male Sintered Bronze Muffler Brass Air Line Fittings for Pneumatic Tools and Industrial Machinery
Main highlights- pneumatic air muffler fittings is made of brass, it is resistant to high pressure, not easy to rust, corrosion-resistant, good high-temperature ductility, strong and durable, long service life. Threaded pipe fittings are made of precision machining, with clear and deep threads, tight and anti-slip, good sealing, leakage prevention, prominent nuts, not easy to be mixed with oil, easy to clean and maintain.
- Thread Compatibility: Confirm your equipment’s port size before installation.
- Pneumatic Muffler, Material: Brass, Length: 37 mm, Width: 13 mm, Thread Specification: 3/8” NPT, In the Package : 8 x Pneumatic Exhaust Muffler
- Air exhaust muffler is mainly used to reduce the output pressure of compressed gas, thereby reducing the noise when the gas is discharged. Not only can it be used for air compressor noise reduction, it can also be used for cylinders, valves, crankcases, gearboxes, oil tanks, fans, compressors, vacuum pumps, throttle valves, pneumatic tools and other systems that require mufflers to clean exhaust and reduce.
- 1.Thread Installation: Screw the muffler’s end directly into the exhaust port of valves, cylinders, or compressors.2.Tighten Securely: Use a wrench to ensure a snug fit without over-torquing (avoid damaging threads).
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02DKARDU
DKARDU Pneumatic Mufflers, 12Pcs 1/4" Male Thread Sintered Bronze Exhaust Silencer, Hex Sintered Silencer Air Line Fitting for Solenoid Valve Cylinder
Main highlights- Widely Use: Widely used to reduce dynamic noise of the pneumatic components or exhaust device. Such as cylinders, air cylinders, solenoid valves, crank cases, gear boxes, oil tanks, pneumatic tools.
- Package Content: 12 pcs 1/4" Pneumatic Mufflers.
- Material: The main material of the sintered bronze muffler is copper. Anti-corrosion, not easy to rust. Hard and not easy to deform.
- G-thread Size: The thread outer diameter of 1/4" muffler is 12.5mm. The thread angle of G-thread is 55 degrees.
- Easy To Install: Easy to install and maintain, particularly suitable where space is limited. High noise reduction effect. Maximum pressure : 300PSI; Max operating temp: 35F to 300F.
9.7Exceptional
Show more
Value for Money03MECCANIXITYMECCANIXITY 8PCS Pneumatic Exhaust Muffler, 1/4" NPT Male Sintered Bronze Muffler Brass Air Line Fittings for Pneumatic Tools and Industrial Machinery
Main highlights- pneumatic air muffler fittings is made of brass, it is resistant to high pressure, not easy to rust, corrosion-resistant, good high-temperature ductility, strong and durable, long service life. Threaded pipe fittings are made of precision machining, with clear and deep threads, tight and anti-slip, good sealing, leakage prevention, prominent nuts, not easy to be mixed with oil, easy to clean and maintain.
- Thread Compatibility: Confirm your equipment’s port size before installation.
- Pneumatic Muffler, Material: Brass, Length: 28 mm, Width: 15 mm, Thread Specification: 1/4” NPT, In the Package : 8 x Pneumatic Exhaust Muffler
- Air exhaust muffler is mainly used to reduce the output pressure of compressed gas, thereby reducing the noise when the gas is discharged. Not only can it be used for air compressor noise reduction, it can also be used for cylinders, valves, crankcases, gearboxes, oil tanks, fans, compressors, vacuum pumps, throttle valves, pneumatic tools and other systems that require mufflers to clean exhaust and reduce.
- 1.Thread Installation: Screw the muffler’s end directly into the exhaust port of valves, cylinders, or compressors.2.Tighten Securely: Use a wrench to ensure a snug fit without over-torquing (avoid damaging threads).
9.6Exceptional
Show more
- 04Mtsooning
Mtsooning 10PCS Pneumatic Exhaust Muffler, 1/8" NPT Adjustable Brass Flow Control Silencer, Sintered Air Controller for Cylinders Solenoid Valves Crank Cases Gear Boxes Oil Tanks
Main highlights- THE BEST AFTER-SALES GUARNTEE SERVICE: When you receive these sintered air controllers, the size is not suitable or too small, or the product is damaged; please contact us in time, we will give you a refund or resend.
- SIZE AND MATERIAL: The diameter of male thread is 0.37inch / 9.5mm.This pneumatic muffler is made of high-quality brass material, resistant to high pressure, sturdy and durable, and has a long service life.
- INSTALLATION: This brass flow control silencer is easy to install and konck down.
- FUNCTION: Pneumatic muffler silencers are mainly for reducing dynamic noise or cleaning the exhaust air for pneumatic air solenoid valve.
- APPLICATION: Slicencers are widely used for cylinders, air cylinders, solenoid valves, crank cases, gear boxes, oil tanks, pneumatic tools.
9.3Excellent
Show more
- 05MECCANIXITY
MECCANIXITY 4PCS Pneumatic Exhaust Muffler, 1/8" NPT Male Sintered Bronze Muffler Brass Air Line Fittings for Pneumatic Tools and Industrial Machinery
Main highlights- pneumatic air muffler fittings is made of brass, it is resistant to high pressure, not easy to rust, corrosion-resistant, good high-temperature ductility, strong and durable, long service life. Threaded pipe fittings are made of precision machining, with clear and deep threads, tight and anti-slip, good sealing, leakage prevention, prominent nuts, not easy to be mixed with oil, easy to clean and maintain.
- Thread Compatibility: Confirm your equipment’s port size before installation.
- Pneumatic Muffler, Material: Brass, Length: 18 mm, Width: 7 mm, Thread Specification: 1/8” NPT, In the Package : 4 x Pneumatic Exhaust Muffler
- Air exhaust muffler is mainly used to reduce the output pressure of compressed gas, thereby reducing the noise when the gas is discharged. Not only can it be used for air compressor noise reduction, it can also be used for cylinders, valves, crankcases, gearboxes, oil tanks, fans, compressors, vacuum pumps, throttle valves, pneumatic tools and other systems that require mufflers to clean exhaust and reduce.
- 1.Thread Installation: Screw the muffler’s end directly into the exhaust port of valves, cylinders, or compressors.2.Tighten Securely: Use a wrench to ensure a snug fit without over-torquing (avoid damaging threads).
9.2Excellent
Show more
- 06PATIKIL
PATIKIL Pneumatic Muffler G 1/8, 10 Pack Sintered Bronze Brass Air Compressor Exhaust Muffler Filters Air Solenoid Valve Fitting for Automation Pneumatic Equipment, Golden
Main highlights- Working Principle: Sintered exhaust mufflers are designed with numerous small holes drilled on the pipe wall. When air flows through these small holes, it reduces the airflow velocity, minimizing noise levels by breaking up the airflow and allowing controlled escape to the lowest level.
- Wide Application: Brass compressor mufflers are utilized in industrial machinery, automotive industry, pneumatic tools, automation equipment, and laboratory settings. They are applied to products such as pneumatic pumps, air brakes, impact wrenches, robotic arms, and laboratory equipment to reduce noise levels and ensure a quieter working or research environment.
- Thread Size: G 1/8; Thread Length: 5mm / 0.2 inch; Overall Size: 1/8mm / 22x12 inch(L x Hex W); Package List: 10 x Pneumatic Exhaust Muffler
- Features: Air Pneumatic Muffler with a temperature range of -20 to 70°C / -4 to 158°F and pressure resistance up to 145psi for versatile pneumatic applications.
- Brass Material: Made of brass, the pneumatic mufflers are corrosion-resistant, heat-resistant, possess excellent acoustic performance, and durability, allowing for long-term use in pneumatic systems.
9.1Excellent
Show more
- 07uxcell
uxcell Plastic Pneumatic Muffler Exhaust Air Line Silencer 1/4 PT Black, 8pcs
Main highlights- Thread Length: 10mm / 0.39"; Total Size Per Piece: 40.6 x 15mm / 1.6" x 0.59" (H*D); Net Weight: 27g
- Product Name: Pneumatic Muffler; Color: Black White; Thread Outer Diameter: Smaller 1/4 PT / 12mm
- Package Content: 8 x Pneumatic Muffler; Fluid Type: Air Vacuum
- Operating Temperature Range: 0-60 Degree; Tube Material: PU/Nylon and Polyurethane
- Operating Pressure: 1-10.2kgf/cm^2(0-1.0mpa); Negative Pressure: -750mmhg(10 Torr)
8.9Very Good
Show more
- 08uxcell
uxcell Sintered Bronze Exhaust Muffler Top Adjustable G3/8 - Brass Body Pneumatic Air Muffler Air Flow Speed Controller Brass Flow Control Muffler 2pcs
Main highlights- ►【UNIVERSAL DESIGN】- Brass Exhaust Muffler Thread Outer Diameter : G3/8 ;Thread Length : 0.31";Top can adjust the air flow speed.
- ►【FEATURE】- Sintered Bronze Exhaust Muffler used to reduce dynamic noise of the pneumatic components or device exhaust.
- ►【APPLICATION】- Pneumatic Muffler used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within noise requirements.
- ►【ADVANTAGE】- Sintered bronze filter element designed in many small holes drilled in the pipe wall, When the air flows through the small holes, gradually changing the frequency of the original airflow, thereby reducing noise.
- ►【 MATERIAL】- Bronze Exhaust Muffler made of copper, high pressure resistant, not easy to rust, not easy to trip, better noise reduction
8.6Very Good
Show more
- 09MECCANIXITY
MECCANIXITY 8PCS Pneumatic Exhaust Muffler, 1/8" NPT Male Sintered Bronze Brass Muffler Air Fittings for Pneumatic Tools and Industrial Machinery
Main highlights- pneumatic air muffler fittings is made of brass, it is resistant to high pressure, not easy to rust, corrosion-resistant, good high-temperature ductility, strong and durable, long service life. Threaded pipe fittings are made of precision machining, with clear and deep threads, tight and anti-slip, good sealing, leakage prevention, prominent nuts, not easy to be mixed with oil, easy to clean and maintain.
- Thread Compatibility: Confirm your equipment’s port size before installation.
- Pneumatic Muffler, Material: Brass, Length: 18 mm, Width: 7 mm, Thread Specification: 1/8” NPT, In the Package : 8 x Pneumatic Exhaust Muffler
- Air exhaust muffler is mainly used to reduce the output pressure of compressed gas, thereby reducing the noise when the gas is discharged. Not only can it be used for air compressor noise reduction, it can also be used for cylinders, valves, crankcases, gearboxes, oil tanks, fans, compressors, vacuum pumps, throttle valves, pneumatic tools and other systems that require mufflers to clean exhaust and reduce.
- 1.Thread Installation: Screw the muffler’s end directly into the exhaust port of valves, cylinders, or compressors.2.Tighten Securely: Use a wrench to ensure a snug fit without over-torquing (avoid damaging threads).
8.4Good
Show more
- 10MECCANIXITY
MECCANIXITY 3 pcs Pneumatic Exhaust Muffler, 3/8" NPT Male Sintered Bronze Muffler Air Line Fittings for Pneumatic Tools and Industrial Machinery
Main highlights- Thread Compatibility: Confirm your equipment’s port size before installation.
- Quick connect air hose fittings is made of brass, it is resistant to high pressure, not easy to rust, corrosion-resistant, good high-temperature ductility, low magnetic permeability, strong and durable, long service life, and silencing effect of 10-20db. Threaded pipe fittings are made of precision machining, with clear and deep threads, tight and anti-slip, good sealing, leakage prevention, prominent nuts, not easy to be mixed with oil, easy to clean and maintain.
- Male Pneumatic Muffler; Material:Copper; Style:Flat head; Thread specification:3/8" NPT-17mm; Size:Total length x thread length x width across side: 15x9x18mm/0.59x0.35x0.71 inch; In the package of:3 pcs x Air Compressor Fitting
- Air exhaust muffler is mainly used to reduce the output pressure of compressed gas, thereby reducing the noise when the gas is discharged. Not only can it be used for air compressor noise reduction, it can also be used for cylinders, valves, crankcases, gearboxes, oil tanks, fans, compressors, vacuum pumps, throttle valves, pneumatic tools and other systems that require mufflers to clean exhaust and reduce.
- 1.Thread Installation: Screw the muffler’s end directly into the exhaust port of valves, cylinders, or compressors.2.Tighten Securely: Use a wrench to ensure a snug fit without over-torquing (avoid damaging threads).
8.2Good
Show more
