Advertising Disclosure
10 Best otdr fiber tester in Canada
Best Choice01WANLUTECHWANLUTECH OTDR Fiber Optic Tester 1310/1550nm 28/26dB 5.4 inch Touchscreen Built-in OPM OLS VFL Event Map Support 4K IP Camera Test Cable Tracker RJ45 Cable TDR Test PoE Power Output Network Tools
Main highlights- [ Singlemode OTDR Fiber Optic Tester ] WANLUTECH OTDR MT-5500combines necessary fiber optic testing in one handheld device. OTDR test: wavelength 1310nm/1550nm, dynamic range 28dB/26dB. Quick Setup mode: quickly set wavelength, distance range, pulse width and measurement duration; Parameters Set mode: professional technicians can set the wavelength, distance range, pulse width, measurement mode, IOR, non-reflection threshold, end threshold and other parameters before testing, which will get more accurate curve results. As well, it is for maintenance and installation of 4K IP camera.(PLEASE NOTE: this 1310nm/1550nm model does not support testing live fiber)
- [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours
- [ OPM VFL LS OLS Event map ] OPM (Optical Power Meter: Calibrated Wavelength 850/1300/1310/1490/1550/1625nm); VFL: it is used to detect fiber for breakage, cracking, bending and other faults; LS (Light Source:mode CW/270 Hz/330 Hz/1 kHz/2 kHz); OLS (Optical Loss Test: It is used to test the insertion loss of optical passive devices); EVENT MAP: Visualise the results of fibre optic link inspections. Save and view the testing curves, support zoom and move curves, view details
- [ Network Test Tools & PoE & Wifi Analyzer ] Built-in porfessional network testing tools,such as Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor, etc. PoE power output: support PoE IEEE802.3af/at , max 48V, power output 30W. Wifi Analyzer, Support 2.4G frequency band, wifi connection, wifi list, wifi information, wifi signal strength detection
- [ Multi-function Tester ] More feature: 5.4'' IPS touch screen, 1920x1152 resolution, one gigabit Ethernet 10/100/1000M Port, audio in etc. Power input: DC12V1A. Power output: DC12V/3A,DC5V/1A
- [ 4K 12MP IP Camera Tester & Cable Tester ] It support to test max 4K 12MP IP cameras.Support IP Discovery/Quick OVIF/IPC test. It supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc. RJ45 Cable TDR Test: it can test cable pair status, length, attenuation, reflectivity, impedance, skew. UTP Cable Tester: Test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. Cable Tracer: Support searching for BNC cable, network cable and telephone cable from cluttered cables
9.7Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Henkion
Henkion OTDR Fiber Optic Tester 1310/1550nm 28/26dB Range 150km Fiber Optic Test IPC Tester TVI/CVI/AHD/CVBS Cable Test Network Tool Connector FC/UPC SC, ST, LC OPM OLS LS VFL Event Map
Main highlights- 【OPM VFL LS OLS TOOL & WIFI】5.4 inch IPS touch screen OTDR tester, 1920x1152 resolution. OPM--Used for optical power testing and fiber link loss relative measurement. VFL-- Easily and accurately determine the position of the fiber optic fault point. LS--Test the bending and breaking of multimode and single-mode fibers. Age, test range 8 KM (26246 ft) OLS--Used to test insertion loss of optical passive devices. Built-in WiFi, WiFi Hotspot, Wi-Fi Analysis
- 【Event Map & Cable Tester & Network Tool】The event map can be automatically tested with one key, and displays information such as the length of fiber optic links, type of joints and location of breakpoints. UTP cable test RJ45 TDR Cable Cable tracer allows you to quickly find BNC cables, network cables and phone cables from dirty cables. Non-contact voltage detection, PD power supply test Network test tool trace route, link monitor, DHCCP server, port flash, ping test
- 【Curve Analysis & Minimal EDZ ADZ & Data Storage】OTDR fiber tester analyzes curve automatically and allows touch screen zoom or moving curves. Test results are displayed in listed format. Event lists clearly reflect event type, distance, loss, attenuation, and reflection. Minimum Event Dead Zone (1.6m) and Attenuation Dead Zone (8m) Automatically or manually save most of 4 traces simultaneously and create a trace report in a storage path. SOR standard file format PDF/EXCEL
- 【CCTV Camera Tester】CCTV tester supports up to 12MP 4000x3000P 4K IP camera tester. IP Discovery Support Hik & DH camera batch activation, you can change the IP address, password, etc. Auto HD APP automatically recognizes up to 8MP (3840x2160P) TVI/CVI/AHD/CVBS coaxial camera type NTSC/PAL (Auto Adaptation) PTZ Control, Call OSD Menu, RS485 Control PoE voltage test, PoE IEEE802.3af/at 48V, 25.5W max DC24V/2A, DC12V/3A, 5V/2A power output Power Management Android 10.0 operation system
- 【 RSO-5000 Series】 OTDR Tester Dimensions/Weight:8.3x6x1.9inch/2lb Please keep browsing our website to get more detailed parameters. OTDR Fiber Tester RSO-5000 series models include RSO-5510, RSO-5500 and RSO-. 51, RSO -50 different models support various functions. Professional OTDR/Camera/Cable/Network Testing Tool
- Intelligent OTDR Measurement: The OTDR fiber optical tester offers 1310/1550nm wavelength, 28/26dB dynamic range, and a maximum test distance of 150km. For auto-range mode: just one click to start testing, select wavelength and test time for quick testing. Parameter Setting Mode: Test after setting parameter distance Curve/map displays simultaneously such as scope, pulse width, measurement time. Note: This mode can only detect light signal, not support live test
9.5Excellent
Show more
- 03Focket
OTDR Fiber Optic Tester, 4 inches Touch Screen 1310/1550nm 20dB MM SM Optical Time Domain Reflectometer Built in VFL & OPM, Optical Network Tester with FC SC Adapter, Test Rang 0-60Km
Main highlights- 【TEST DATA PROCESSING】This fiber optic power meter is equipped with USB data interface, you can upload data to PC via USB port, further analysis or processing can be done via management software. Or you can save it as SOR format file or print in batch. Report include test condition, test curves, link loss, average loss, etc.
- 【MULTIPLE FUNCTIONS】This fiber optic tool built in stable light source function (Wavelength: 1310/1550nm), optical power meter (OPM) and visual fault locator (VFL). It can be used for network construction, optical fiber breakpoint identification, optical cable length measurement, and relative optical power loss calculation. SC, FC adapters are also included for your enhanced convenience.
- 【HIGH PRECISION 4 IN 1 OTDR TESTER】This fiber optic meter's test range of OTDR is 0-60KM; VFL is 10mw, OLS is 1310/1550nm; The wavelength range of the OPM is 800‑1650nm, supports 6 calibration wavelengths, and the measurement range is ‑50~+26dBm and the dead zone of reflection event is 2m. It is a cost effective yet powerful fiber optic tester.
- 【4 INCHES IPS TOUCH SCREEN】This fiber optic fault locator is equipped with integrated 4 inches color IPS LCD display, supports key and touch dual operation, and features with 800 x 480 pixels, makes your work simple, intuitive and easy. You can easily process, generate and print report through the computer.
- 【100% QUALITY ASSURANCE】The shell of the optical fiber power meter is made of ABS plastic, which has good toughness and corrosion resistance, suitable for various environments. We are very confident in the quality of this optical meter, and provide 12 months or refund for it. Please feel to reach us if you have any questions about your purchase.
9.4Excellent
Show more
Value for Money04ElfcamElfcam® - OTDR for FTTH, 24dB/22dB 1310nm/1550nm, Portable 4 in 1 OTDR + VFL+ OPM + OLS, OTDR Fiber Optic Tester/Reflectometer of The Optical Domain, Up to 60 km (ELF-3800)
Main highlights- Warranty: 3 years. Superior customer service (24/7 service in France). Welcome to contact the service.
- Other features of this OTDR: 1)OPM supports frequency identification CW/270Hz/1kHz/2kHz Test range: -60dBm ~+3dBm. 2)VFL 650nm/10mW and OLS can work in background; 3)PON network test, maximum PLC splitter 1*64. 4) 4GB memory card to store.
- OTDR for FTTH, FTTx, single mode 1310nm/1550nm, 24dB / 22dB, portable 4 in 1 OTDR+VFL+OPM+OLS, OTDR fiber optic tester/optical domain reflectometer, up to 60 km, dead zone of event: 1.2 m. Weight: 350 g.
- Fiber port: SC/APC, Integrated: 3.5 inch color screen (not touch). Language: French, English.
- 4000mAh lithium battery combined with intelligent energy-saving technology ensures up to 8 hours of continuous testing and 20 hours standby, suitable for long time field work. The LED flashlight provides extra convenience for night operation.
9.3Excellent
Show more
- 05D YEDEMC
D YEDEMC Mini-Pro 1310/1550nm SM OTDR Mulit-Function Tester Built in OPM/OLS / RJ45 Test/VFL Test Rang 5m-60Km Dynamic Range 24dB/22dB Connector UPC (YD-3000-APC)
Main highlights- Please make sure you are a professional before purchasing. If you can't test, please contact us. Our products have been strictly tested before leaving the factory and will not be unusable. Because of the accuracy of the product, some scenarios cannot be used. You need to buy products with higher accuracy, not because our products have problems.
- Parameters：Mini-Pro OTDR Test Wavelength 1310/1550nm,Test Range 5m~60km,Test Unit is km. Dynamic Range 24dB/22dB (can't test spliter,if test the spliter,the Dynamic need more than 42dB) .Connector FC/UPC (Interchangeable SC、ST)
- Internal Storage: Micro USB Data Interface; External storage TF Card. Analysis Software included for further data analysis or processing,(Note:The Analysis Software need install on PC,Using the Analysis Software open print the test result and print)
- Functions: For evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses.
- Built-In: 3.5 inch Color Display (not touch);OTDR, Event Map, Power Meter, Cable Length Measurement Tool, Cable Tracker, and RJ45 Sequencer
9.1Excellent
Show more
- 06Elfcam
Elfcam - Mini OTDR ELF-2800C Single-Mode Optical Fiber 1310/1550nm, Range up to 60km, 3.5" Touch Screen - Test Range -50 to +26 dBm
Main highlights- High Sensitivity Optical Photometer The integrated optical multimeter allows accurate measurement of fiber signal strength with a test range of -50dBm to +26dBm, ideal for installation, verification and maintenance of FTTH networks
- High Precision Mini OTDR Fiber Optic Mini OTDR Single Mode 1310nm / 1550nm with 22dB / 20dB Dynamic Range up to 60km, Ideal for Diagnosis and Maintenance of FTTH, FTTB Networks and Fiber Optic Infrastructure
- 3.5" Touch Screen and Long Life Battery Equipped with a 3.5-inch (800×480) color touch screen for intuitive operation. The 3000mAh lithium battery provides up to 8 hours of continuous use and 10 hours standby time. Integrated LED light for dark environment interventions
- 3-in-1 Multifunction Fiber Optic Tester This device combines Mini OTDR, optical photometer and visual fault locator in one compact tool. A complete solution for telecom technicians, fiber installers and network maintenance
- 10mW Visual Fault Locator The 650 nm ±20 nm (10 mW) allows for rapid localization of breaks, micro-bends or continuity defects in fiber optic cables, facilitating the visual identification of problems in the field
9.0Excellent
Show more
- 07D YEDEMC
D YEDEMC Mini-Pro 1310/1550nm SM OTDR Mulit-Function Tester Built in OPM/OLS / RJ45 Test/VFL Test Rang 5m-60Km Dynamic Range 24dB/22dB Connector UPC (YD-3000-UPC)
Main highlights- Please make sure you are a professional before purchasing. If you can't test, please contact us. Our products have been strictly tested before leaving the factory and will not be unusable. Because of the accuracy of the product, some scenarios cannot be used. You need to buy products with higher accuracy, not because our products have problems.
- Parameters：Mini-Pro OTDR Test Wavelength 1310/1550nm,Test Range 5m~60km,Test Unit is km. Dynamic Range 24dB/22dB (can't test spliter,if test the spliter,the Dynamic need more than 42dB) .Connector FC/UPC (Interchangeable SC、ST)
- Internal Storage: Micro USB Data Interface; External storage TF Card. Analysis Software included for further data analysis or processing,(Note:The Analysis Software need install on PC,Using the Analysis Software open print the test result and print)
- Functions: For evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses.
- Built-In: 3.5 inch Color Display (not touch);OTDR, Event Map, Power Meter, Cable Length Measurement Tool, Cable Tracker, and RJ45 Sequencer
8.8Very Good
Show more
- 08Rsrteng
Rsrteng OTDR Fiber Optic Tester 1310/1550nm 26/24dB Test Range 500m-100km 4.3" Touch Screen Event Map OPM VFL LS OLS RJ45 Test 8GB TF Card PC-Sides
Main highlights- 【RJ45 Cable Test】Support RJ45 cable sequence test/cable length, RJ45 cable tracker. Note: This Mini-OTDR single mode dynamic range is 26dB/24dB, it does not support live testing, can not test the splitter, if test the splitter, the dynamic need of more than 42dB. Clean the fiber connector before the test or test result is not accurate
- 【OTDR Tester】OTDR fiber optic tester is used to measure length, loss, connection quality, identifying fiber break points and other fiber optic parameters. 4.3" 800 x 480" IPS TFT LCD Touch Screen Support OTDR, OTDR, Event Map, Adjustable Power Stable OLS, Optical Loss Test, VFL, LS RJ45 Cable Length/Sequence/Tracking 8GB TF Card, PC Side Analysis Software. Connector: FC/UPC, and also equipped with SC, ST, LC.
- Professional OTDR Measurement - OTDR provides 1310/1550nm wavelength and 26/24dB dynamic range, the maximum test distance can up to 100km. Test unit: km, kft, e. FC/UPC connector. For OTDR: no complex adjustments, a key test. OTDR: professional measurement, testing after adjusting parameters such as wavelength, test range and pulse width, etc. Curve/list/map are displayed simultaneously. Note: Fiber inspector does not support testing.
- OPM VFL LS OLS Event Map and Tools: Event map can automatically test one key, and information such as fiber optic link length to be measured, joint type and breakpoint position are displayed graphically. Integrated optical power meter, vfl, ls and ols. OPM supports CW/270/330/1kHz/2kHz frequency identification. VFL and OLS can work in the background. LS supports CW/modulation mode output with adjustable output power. Type: Class 2; Power < 1mW, Wavelength: 650nm
- Data Storage & Battery - 8G TF card memory, which can store more than 200,000 curves; one-click screen capture to save the interface. Supports charging data next to PC via USB interface for data analysis, processing and printing test results. OTDR Fiber Optic Tester is powered by 3.7V/4000mAh/14.8Wh lithium battery, intelligent energy-saving management, continuous test >12 hours. OTDR Tester/Dimension: 0.5kg(1.1lb)/173*109*45mm
8.7Very Good
Show more
- 09QIIRUN
OTDR Fiber Optic Tester SM 1310/1550nm 26/24dB 100km with 4.3-inch Touch Screen, Multi-Functional OTDR with VFL OPM OLS Event Map RJ45 Tracking Functions
Main highlights- Single Mode Multi-functional Mini OTDR -- Integrates functions such as Auto OTDR, Expert OTDR, Event Map, Optical Power Meter, Visual Fault Locator, Power adjustable stable Laser Source, Optical Loss Test, RJ45 cable length / sequence test, RJ45 cable tracking
- Simple and Intuitive to Operate -- this OTDR tester adopts with user-friendly UI design, 4.3-inch 800*480 pixels Touch Screen and computer-level file management, all together makes your work simple, intuitive and easy. Auto OTDR Mode allows greenhand user to operate it comfortably
- Other Features include -- 1）OPM supports CW/270/330/1K/2KHZ frequency identification； 2）VFL and OLS can run in the background, 3）OLS supports CW/modulation mode output with adjustable output power，4）Once click screen capture, easy to save the interface
- Large Battery Capacity -- 3.74v 4,000mAh Lithium Battery together with intelligent power saving technology ensure up to 12 hours continuous test and 20 hours standby and suitable for long time field work. LED Flashlight is also equipped for your convenience
- Data Storage and Processing -- you can upload data to PC via USB port, further analysis or processing can be done via management software. Built-in 8G memory card can save up to 200,000 curves. Measuring Unit includes KM, Feet and Miles to meet your preference
8.5Good
Show more
- 10BAOSHLA
OTDR A-900D UPC Interface 9 in 1 Function 60KM 1310 1550nm Fiber Optic Tester with SC/FC/ST/LC Adapter and SC 2.5mm LC 1.25mm Fiber Optic Cleaning Pen with OLS OPM VFL RJ45 Network Testing
Main highlights- Parameters：Mini-Pro OTDR Test Wavelength 1310/1550nm,Test Range 5m~60km,Test Unit is km. Dynamic Range 24dB/22dB (can't test spliter,if test the spliter,the Dynamic need more than 42dB) .Connector (Interchangeable SC,FC,ST,LC).
- Large Battery Capacity -- 4,000mAh Lithium Battery together with intelligent power saving technology ensure up to 12 hours continuous testing and 20 hours standby, suitable for long time field work. LED flashlight provides extra convenience for night operation.
- Internal Storage: Micro USB Data Interface; External storage TF Card. Analysis Software included for further data analysis or processing,(Note:The Analysis Software need install on PC,Using the Analysis Software open print the test result and print)
- Built-In: 3.5 inch Color Display (not touch);OTDR, Event Map, Power Meter, Light Source, VFL, Cable Length Measurement Tool, Cable Tracker, and RJ45 Sequencer
- Accurate and Professional Measuring – For Auto OTDR Mode, it is One Key Operation, no need to have complex settings and allows even greenhand user to use it confidently.
8.4Good
Show more
