Advertising Disclosure
10 Best modules in Canada
Best Choice01PlayStationPlayStation 5 - DualSense Edge Replaceable Stick Module Edition
Main highlights- Maintain your DualSense Edge wireless controller’s great performance with this replacement stick module.
9.9Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Waveshare
waveshare 2inch LCD Display Module IPS Screen 240×320 Resolution with Embedded Controller Communicating via SPI Interface.
Main highlights- This is a general LCD display Module, IPS screen, 2inch diagonal, 240×320 resolution, with embedded controller, communicating via SPI interface.
- SPI interface, requires minimum GPIO for controlling
- Resolution: 240×320 Backlight: LED Operating voltage: 3.3V/5V
- Driver: ST7789 Interface: SPI Display color: RGB, 262K color
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/ /STM32)
9.8Exceptional
Show more
Value for Money03DUTTYTP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions 3PCS
Main highlights- Maximum charging current output: 1000 ma
- Light state: no load the light not bright, red light for recharging, is full of green light.
- Input interface: Type-c USB.
- Battery: over-current protection current 3 A
- Battery overcharge lifting voltage: 4.00 V
9.6Exceptional
Show more
- 04
undefinedModules
9.3Excellent
- 05Tyenaza
1 Channel Relay Module Control Board with Optocoupler Isolation High and Low Level Trigger (5V)
Main highlights- Universal Interface : All interfaces can be provided through directly connected terminal leads since the humanized interface design, Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- Load Range : NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- High Compatibility : The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, ARM, Raspberry Pi, MSP430, TTL logic etc)
- Fault-tolerant Design : The relay will not operate even if the control line is disconnected.
- Control Devices : The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
9.2Excellent
Show more
- 06Kioiner
Kioiner 5 Pcs DC 5-36V 400W Trigger Switch Drive Module, PWM Control Board DC Motor Speed Controller High-Power Electronic Switch MOSFET Adjustment Switch Control Board Lamp Brightness Control
Main highlights- Versatile Compatibility: With wide voltage support and perfect compatibility with PWM signals, this module is highly adaptable to different signal sources. It can be easily connected to a variety of devices such as single-chip IO ports, PLC interfaces, DC power supplies, and more. Additionally, it supports a wide frequency range of 0 to 20KHZ, enabling precise control and modulation.
- Reliable and Durable: Crafted with meticulous attention to detail, this module guarantees a long service life with unlimited switch cycles. It operates flawlessly within a wide temperature range, from -40°C to 85°C, ensuring reliable performance even in harsh environments. You can confidently rely on this module for consistent and efficient operation.
- High-Performance Control: The Trigger Switch Drive Module is designed to provide exceptional control over high-power equipment and devices. With its imported dual MOS parallel active output, it offers lower internal resistance and a larger current capacity, delivering a strong power output of 15A at room temperature, and a remarkable 400W power capacity. This module is built to meet the demands of various equipment applications.
- Enhanced Control Functions: The Trigger Switch Drive Module provides exceptional control capabilities, allowing you to regulate high-power devices with ease. Its output terminal is capable of controlling motors, light bulbs, LED light strips, DC motors, micro pumps, solenoid valves, and more. By utilizing PWM input, you can effortlessly adjust motor speed and lighting brightness according to your specific requirements.
- Compact and Efficient: The Trigger Switch Drive Module features a compact size of 3.7*1.5*1.7cm, making it convenient to integrate into your setup. It weighs only 65g, allowing for easy installation and portability. Its exceptional efficiency and power handling capabilities make it a valuable tool for various applications.
9.1Excellent
Show more
- 07ELEGOO
ELEGOO 4 Channel DC 5V Relay Module with Optocoupler for Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi
Main highlights- Working status indicator lights are conducive to the safe use
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- This relay module is 5V active low. Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Notice: The input signal trigger mode is low level effective mode which ‘closes’ the normally open (NO) switch at low level input. The advantages of low level drive, the system power reset, the load will not work, high security.
- 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current.
9.0Excellent
Show more
- 08Geekstory
Geekstory 5 PCS Micro SD Card Module Mini TF Card Adapter with Memory Storage Breakout Board SPI Interface Driver + 40 PCS Female to Male Dupont Cable Line for Arduino Raspberry Pi
Main highlights- ★You can get 5 x SD card + 20cm 40 PCS Female to Male Dupont Cable Line. Function: SPI Reader mini SD Memory Card TF Memory Card Shield Module for Arduino
- ★The product documentation link cannot be displayed. If you need technical documentation, Please click “Geekstory” to con.tact us
- ★Support Micro SD card, Micro SDHC card (high speed card). The module (MicroSD Card Adapter) is a Micro SD card reader module, through the file system and SPI interface driver, the MCU system can completethe reading and writing of files in the MicroSD card
- ★Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination
- ★On-board level shifting circuit, interface level can be 5V. Power supply is 5V, onboard 5V regulator circuit. Communication interface is standard SPI interface
8.9Very Good
Show more
- 09Valefod
Valefod 10 Pack LM2596 DC to DC High Efficiency Voltage Regulator 3.2-35V to 1.25-30V Buck Converter DIY Power Supply Step Down Module
Main highlights- 【Output Voltage】DC 1.25V to 30V voltage is continuously adjustable, maximum output current is 3A.
- 【Mini Size】45 * 23 * 14 mm (with potentiometer). 10pcs included.
- 【Input Voltage】DC 3.2V to 35V (input voltage must be 1.5V higher than the output voltage, no boost).
- 【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.
- 【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V)
8.7Very Good
Show more
- 10ELEGOO
ELEGOO 8 Channel DC 5V Relay Module with Optocoupler for Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi
Main highlights- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
- The link of tutorial: bit.ly/3U1Gy56
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control
- Standard interface that can be controlled directly by microcontroller (UNO, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Notice: The input signal trigger mode is low level effective mode which ‘closes’ the normally open (NO) switch at low level input. The advantages of low level drive, the system power reset, the load will not work, high security.
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- 5V 8-Channel Relay interface board, each one needs 15-20mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
8.6Very Good
Show more
