Advertising Disclosure
10 Best methanol lube in Canada
Best Choice01CHOIMOONCHOIMOON 3/8 Fuel Line 6AN Braided Fuel Hose 500 - 2000 psi High Pressure Transmission Cooler Hose Suitable for Fuel Systems, Marine, Coolants, Oil, Air, Methanol, and Lubricant (20 FT)
Main highlights- WIDE APPLICATION The 6an fuel line is specially designed to be compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85.
- QUALITY TESTED The tube is double annealed and 304 grade making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs.Oil resistant, cold-resistant, and ethanol tolerance.
- PREMIUM MATERIALThe 6AN transmission cooler hose is made with high-quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber, thus preventing it from rusting and corrosion. It has a wall thickness of 35mm
- BETTER TRANSIMMISIONA perfect fuel line for vehicles with engines that need a large tube diameter. Its 3/8 inch diameter helps in better flow and intake of fuel. This 6AN braided hose ensures that the car engine is able to process the fuel in the best possible state. The 6AN fuel line comes as a roll of 20 feet long enough for a wide range of applications.
- BENDABLE The 6AN transmission hose enable you to make sharp bends without kinking. It is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves.
9.6Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money02steberFuel Line 3/4" ID NBR Hose 12AN Push on Hose 0.9 OD Engine Liner Fuel Injection Compatible with Fuel System, E85, E10, Methanol, Oils, Lubricants and Coolant, 300 PSI 5 feet
Main highlights- Working Pressure 2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -40 to +275 degrees F
- Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines
- The Fuel Lines for fuel injected systems, are oil resistant,cold-resistant and ethanol tolerance
- ID: 3/4 inch / 19mm, OD: 1.1 inch / 28mm, 12 AN NBR liner hose, 5 feet
- Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc
9.5Excellent
Show more
- 03steber
Fuel Line 12mm 0.47" ID NBR Hose Push on Hose 0.7" OD Engines Liner Suitable 300 PSI Working Pressure for Fuel Systems, E85, E10, Coolants, Oil, Air, Methanol and Lubricant, 5 feet
Main highlights- Working Pressure 2Mpa. Burst Pressure 5Mpa, Handles temperature ranges of -40 to +275 degrees F
- Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines
- The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance
- ID: 0.47 inch, OD: 0.71 inch, NBR liner hose, 5 feet
- Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc
9.4Excellent
Show more
- 04
Gardner BenderGardner Bender 79-600 Terminal Grease Dielectric Silicone Compound, Lubricant and Sealant Protects from Corrosion
Main highlights- Waterproof and insoluble in water, methanol, ethanol, vegetable and mineral oils, glycol, and glycerin
- Stable consistency from-55 deg F, 550 deg F (-67 deg C thru 257 deg C)
- Prevents corrosion and reduces short circuits in electrical connections and terminations where water may be present (indoors and out)
- Nsf/usda h-1 Compliant and suitable for use in all areas where incidental FOOD contact may occur or in potable water systems
- Excellent lubricant and sealant for valves, plugs, rings, almost any application imaginable
9.3Excellent
Show more
- 05
Gardner Bender
Gardner Bender 79-600 Terminal Grease Dielectric Silicone Compound, Lubricant and Sealant Protects from Corrosion
Main highlights- Waterproof and insoluble in water, methanol, ethanol, vegetable and mineral oils, glycol, and glycerin
- Stable consistency from-55 deg F, 550 deg F (-67 deg C thru 257 deg C)
- Prevents corrosion and reduces short circuits in electrical connections and terminations where water may be present (indoors and out)
- Nsf/usda h-1 Compliant and suitable for use in all areas where incidental FOOD contact may occur or in potable water systems
- Excellent lubricant and sealant for valves, plugs, rings, almost any application imaginable
9.2Excellent
Show more
- 06VP Racing
VP Racing Fuels Speed Sauce Injection Fluid, 1 Gallon
Main highlights- Reduces knock/detonation, allowing you to increase boost and advance ignition timing.
- Reduces exhaust gas temperatures for turbo and post-treatment protection.
- Helps clean carbon deposits on the valves, pistons, and combustion chambers.
- Designed for turbocharged, supercharged, and high compression, naturally aspirated engines.
9.1Excellent
Show more
- 07CHOIMOON
3/8 Inch 10mm Fuel Line NBR Hose Transmission Push-On Hose Suitable for Fuel Systems, E85, E10, Coolants, Oil, Air, Methanol, and Lubricant
Main highlights- Working Pressure: 300 PSI. Burst Pressure: 1200 PSI. Temperature Range: -40°F to 302°F.
- WIDE APPLICATION - An ideal solution for many automotive needs. Use it as a fuel line, transmission cooler hose, power steering hose, heater hose, or hydraulic line in cars, trucks, and equipment.
- MULTI-FUEL COMPATIBILITY - This 3/8 fuel hose safely handles gasoline, E85, diesel, oil, and coolant, serving as a universal 3/8 fuel line and 3/8 fuel injection hose for various fuel and fluid systems.
- ID: 3/8" (10mm); OD: 3/4" (16mm). Length: 10 FT
- HIGH-PERFORMANCE - Made with oil-resistant rubber, this 3/8 high pressure hose withstands extreme temperatures and pressure, making it ideal for demanding 3/8 oil cooler hose and under-hood applications.
- EASY INSTALL - Highly flexible for tight bends without kinking (1.89" min radius), this hose works with 3/8 push lock hose fittings for a secure, tool-free connection, perfect for custom 3/8 fuel transfer hose or 3/8 heater hose routing.
9.0Excellent
Show more
- 08
VP Racing
M2 UPPER LUBE SINGLE 16OZ
Main highlights- Fuel Additive - Upper Cylinder Lube - 16.00 oz - Ethanol / Methanol - Each
8.7Very Good
Show more
- 09
Pilots HQ
Pilots HQ Dow Corning Molykote 111 Oring/Valve Lubricant/Sealant, 1/2oz (Repackaged for Smaller Applications), Water Resistant Lubricant, Food Grade Lubricant, Dow 111
Main highlights- Used as an anti-stick and sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout.
- Sealant for vacuum and pressure systems. Rubber and plastic O-rings, gaskets and seals.
- Sealant for outdoor equipment (also shipboard) subject to washing and harsh environmental exposure: meters, electrical service entrance and underground connections.
- Lubrication for control and pressure plug valves, water softener and faucet valves.
- Genuine Dow Corning 111. Excellent Water Resistance. FDA (Food and Drug Administration) 21 CFR 175.300; NSF (National Sanitation Foundation) Standard 51 & 61
8.6Very Good
Show more
- 10
Manhattan Oil
Power Plus 19769-18 Fuel Additive Alcohol Top Lube Cherry Scented
11% OffMain highlights- Manhattan Oil
- Fuel System Additives
- 19769-18
8.5Good
Show more
