Advertising Disclosure
10 Best marine epoxy resin in Canada
Best Choice01TRUE COMPOSITESTrue Composites Fiberglass Resin Polyester Resin Marine Grade Resin 1 Gallon with MEKP Hardener Polymer Resin Fiberglass Repair Kit Laminating Resin for Wood Boat Building and Repair
Main highlights- Multiple Applications - This polyester fiberglass resin is ideal for a variety of uses, including marine laminating, aerospace, FRP parts, auto body repair, transportation, and more.
- High Compatibility - Suited for all types of fiberglass and coring materials, this polyester laminating resin is excellent for low-cost repairs, new construction parts, and vertical surfaces.
- Grade A - Not your standard boatyard resin, this polyester fiberglass laminating resin is the highest grade you will find—a premium product trusted in the marine industry and by most manufaturers.
- Dries Tack-Free - Manufactured in the USA, this DCPD-type resin cures tack-free no surface sealer. The set includes 1 gallon of resin and a 2-ounce bottle of MEKP catalyst.
- Cures Fast - Use this resin on wood, fiberglass, or metal without any inconvenience. Depending on temperature and humidity, it can reach its cured stage in as little as 4 hours and up to 24 hours.
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money02TotalBoatTotalBoat Polyester Laminating Resin - Marine Grade Fiberglass Resin and MEKP Catalyst for Layups and Repairs (Gallon)
Main highlights- INCLUDES MEKP CATALYST: Adjust the amount of MEKP hardener to control gel time; slow gel (20 min +): 1 teaspoon of MEKP per quart of resin; medium (15-20 min): 2 tsp/qt; fast (10 min): 3 tsp/qt
- GENERAL PURPOSE POLYESTER RESIN stays tacky to hold fiberglass cloth and composite fabrics in place during boat building & layups; ideal for hull & surfboard repair, bathtub & automotive fiberglass repairs
- FAST WET OUT OF FIBERGLASS and other reinforcement fabrics used to create composites and FRP parts for yachts, boats, motorcycles and more; ideal for spray-ups and hand layups on fiberglass, wood & metal
- EASY TO USE, NO SANDING: Polyester fiberglass resin is an excellent base coat for laminating applications; just mix in MEKP catalyst and use immediately; surface stays tacky so next layer adheres strongly
- CHOOSE QUART OR GALLON SIZE. Note: Resin and work area should be between 70°F to 95°F; store in temperatures below 77°F; for the final layer in your layup, use TotalBoat Polyester Finishing Resin
9.6Exceptional
Show more
- 03
JB WeldJ-B Weld 50172CAN MarineWeld Epoxy Syringe 25 ml – White Two-Part Waterproof Adhesive for Marine and Fibreglass Repairs
Main highlights- Waterproof and flexible bond: Once cured, the adhesive is waterproof, UV resistant and offers elasticity to accommodate movement and vibration
- Two-part marine epoxy adhesive: Specially formulated two-part adhesive system designed to provide strong, lasting repairs with added flexibility for marine environments
- Multi-surface compatibility: Suitable for metal, fibreglass, SMC, plastic, PVC, wood, aluminum and composite materials
- High-strength performance: Delivers high-strength performance up to 2350 PSI for dependable bonding above or below the waterline
- Fast set and cure time: Sets in approximately five minutes and cures fully in one hour, allowing repairs to be completed quickly
9.4Excellent
Show more
- 04West System
WEST System G/Flex Epoxy (2-4oz)
Main highlights- G/flex has the ability to glue damp woods. It can be used on wet surfaces, even underwater when applied with specific techniques.
- G/flex adheres tenaciously to difficult- to-glue hardwoods, both tropical and domestic varieties. This is important since many of the exotic and tropical species now being used to replace traditional woods present bonding challenges.
- G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods.
- Country of origin: United States
9.2Excellent
Show more
- 05West System
WEST System G/Flex Epoxy (2-4oz)
Main highlights- G/flex has the ability to glue damp woods. It can be used on wet surfaces, even underwater when applied with specific techniques.
- G/flex adheres tenaciously to difficult- to-glue hardwoods, both tropical and domestic varieties. This is important since many of the exotic and tropical species now being used to replace traditional woods present bonding challenges.
- G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods.
- Country of origin: United States
9.0Excellent
Show more
- 06JB Weld
J-B Weld 8272CAN MarineWeld Marine Epoxy 2 oz – Steel-Reinforced Two-Part Cold-Weld Adhesive for Aluminum, Metal and Fibreglass Repairs
Main highlights- Set and cure time: Sets in approximately four to six hours at room temperature and fully cures within fifteen to twenty-four hours
- Multi-surface compatibility: Suitable for aluminum, metal, composites, fibreglass, plastic and wood in marine and general repair projects
- Marine-grade two-part epoxy: Steel-reinforced cold-weld system specially formulated for marine and watercraft repair applications
- High-strength waterproof bond: Rated at 5020 PSI tensile strength and retains durability above and below the water’s surface
- Heat-resistant performance: Withstands temperatures up to 550°F once cured and dries to a dark grey finish
8.8Very Good
Show more
- 07JB Weld
J-B Weld 8272CAN MarineWeld Marine Epoxy 2 oz – Steel-Reinforced Two-Part Cold-Weld Adhesive for Aluminum, Metal and Fibreglass Repairs
Main highlights- Set and cure time: Sets in approximately four to six hours at room temperature and fully cures within fifteen to twenty-four hours
- Multi-surface compatibility: Suitable for aluminum, metal, composites, fibreglass, plastic and wood in marine and general repair projects
- Marine-grade two-part epoxy: Steel-reinforced cold-weld system specially formulated for marine and watercraft repair applications
- High-strength waterproof bond: Rated at 5020 PSI tensile strength and retains durability above and below the water’s surface
- Heat-resistant performance: Withstands temperatures up to 550°F once cured and dries to a dark grey finish
8.6Very Good
Show more
- 08PC Products
PC Products PC-11 Epoxy Adhesive Paste Kit with Mixing Tool, Two-Part Marine Grade, 1/2lb in Two Cans, Off White, (20128)
Main highlights- Use the included tool to bond PC-11 to many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber
- Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments
- Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water
- High-tack paste can be used in vertical and overhead applications
- Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F
8.5Good
Show more
- 09GORILLA
Gorilla Glue Epoxy, Dries Clear, Gap Filling, Indoor & Outdoor, Water Resistant, 5 Minute Set, Dries Clear Transparent, 0.85oz/25mL, (Pack of 1) 4200602
26% Off8.2Good
Show more
- 10GORILLA
Gorilla Glue Epoxy, Dries Clear, Gap Filling, Indoor & Outdoor, Water Resistant, 5 Minute Set, Dries Clear Transparent, 0.85oz/25mL, (Pack of 1) 4200602
26% Off7.9Good
Show more
