Advertising Disclosure
10 Best hose lines fittings in Canada
Best Choice01EVIL ENERGYEvil ENERGY 6AN 3/8" Fuel line Hose Fitting Kit Braided Nylon Stainless Steel Oil Gas CPE 16FT Black
Free ShippingMain highlights- The 6an nylon braided fuel line kit includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line (Length: 16feet). Hose ID: 5/16" (8.71mm). Hose OD: 0.56inch (14.22mm). Please measure before purchase!
- Professional installation is highly recommended.
- Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use.
- Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line.
- Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase.
9.6Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money02EVIL ENERGYEVIL ENERGY 8AN 1/2" Fuel line Hose Fitting Kit Braided Nylon Stainless Steel Oil Gas CPE 10FT Black
Free ShippingMain highlights- [Size] ID of 8an fuel hose:0.41"(10.5mm),OD:0.65"(16.5mm). Length:10ft.
- [Parameter] Working pressure:750psi,burst pressure:2250psi; Temperature range:-22°F to 248°F(﹣30°C to 120°C); Min bending radius:88.9mm.
- [Material] 8an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.
- [Compatibility] The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.
- [Application] 8AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.
9.4Excellent
Show more
- 03WHK
WHK 12 PACK Air Hose Repair Kit Fittings 3/8 Barb to 1/4 NPT Air Hose Barb Connectors with Sealant Air Line Coupler, Brass Pipe Fittings Male Threaded with 12 Pcs Hose Clamp…
Free ShippingMain highlights- 【Widen Application】This Milton Air Fittings can be used universally in water, oil, gas, air tools and as well as other pipes;
- 【Quick connect air hose fittings Size】12 PACK 3/8" Barb X 1/4" Male NPT Air Hose Adapters with sealant Air Line Coupler, Brass Pipe Fittings Male Threaded with 12 Pcs Hose Clamp;
- 【Most Important】This Air Hose fittings attached with 12 packs clamps that is made of stainless steel can prevent rust. Clamping with one end of the hose helps to bite and lock the pipe. They are sturdy and flexible long belts can be adjusted to the size of your pipes.
- 【High Flow Air Fittings Feature】Coated the male end with selected sealer suitable for creating an air tight environment, which eliminates the need for sealing tape;
- 【Air Hose Repair Kit Fittings Material】●The material of Air Hose Connectors is use solid 100% heavy duty brass,safety and duable, which is used in prevention and protection of fittings against scratches,corrosion and long time of wear and tear.
9.3Excellent
Show more
- 04IPARTS EXPERT
3/8 6AN 20FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fuel Hose Fitting Adapter Kit - Black
Free ShippingMain highlights- Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.
- Safety Features For Your Protection: Fuel Hose: Size : 6AN, Length: 20FT, Working Temperature: -100 F to 500 F, Pressure Tolerance: 350 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.
- Package Includes: 1 6AN 20FT Nylon Braided Hose, 4 Straight Swivel Hose Ends, 2 45 Degree Swivel Hose Ends, 2 90 Degree Swivel Hose Ends, 2 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak.
- Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.
- Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided add CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.
9.2Excellent
Show more
- 05Aisetmoon
Aisetmoon 30Pcs Quick Connect Air Hose Fittings, 1/4 inch OD Connect Fittings Kit, 1/4 Inch Plastic Quick Fitting, Air Line Fitting Kits, Plastic Quick Release Pneumatic Connectors
Free ShippingMain highlights- Wide application: Are widely used for automatic industry, workshop equipment, auto repair ,decoration spray paint, electronics, woodworking, dental equipment, etc. Can be used to connect pipes and different pneumatic components.
- Pressure Range: Air Hose line fittings working pressure from air vacuum to 145 psi. Operating Temperature: 0-60℃. Normal Pressure Range: 0-0.9Mpa. Temperature Range: 32°C ～140°C. Maximum Pressure: 1.32Mpa.
- Package Includes: You will get 30 pcs 1/4 inch OD Quick Connect Air Hose Fittings. 10 Spliters, 8 Elbows, 6 Tee, 6 Straight. Fit for 1/4''tube.
- High quality: They are made of high quality PU and plastic, good air tightness, long service life. High pressure resistance, can withstand strong pressure without tripping out. It doesn't fall off under high pressure, safe and reliable. Great for long term use.
- Easy to use: These push to connect fittings are easy for connecting tubes without additional sealing for safe tube use. 360-degree free rotation, and an oval-shaped release ring that can be removed effortlessly.
9.1Excellent
Show more
- 06Roastove
Roastove 48" Flexible Yellow Coated Gas Line Connector Kit for Stove, Dryer, Gas Water Heater, Furnace,5/8 in.OD(1/2 in. ID Flexible Gas Line with Connector 1/2" FIP &1/2" MIP & 3/4" MIP Fitting
Free ShippingMain highlights- 【Flexible】This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
- 【EASY TO INSTALL】No need for more connectors, just make sure your sizing fits our dryer gas line, only one wrench and a little bit teflon tape are all you need.
- 【DURABLE】304 Stainless steel flexible tubing with plated steel end fittings capacity 106,000 BTU.
- 【Contents】48" gas dryer installation kit has an outside dimension of 5/8", and inner diameter 1/2". gas line connector adapter: 2 Pcs 15/16" -16 UN to 1/2" FIP, 2 Pcs 15/16"- 16 UN to 1/2" MIP(Tapped 3/8" FIP ), 2Pcs 15/16"-16 UN to 3/4" MIP(Tapped 1/2" FIP ), Six thread adapter fitting in total.
- 【COMPATIBILITY】This gas appliance connector kit are designed for Stove, Dryer, Gas Water Heater, Furnace and etc.
8.8Very Good
Show more
- 07PATIKIL
PATIKIL 3/16 Inches Push to Connect Fittings, 10Pcs Plastic Air Line Hose Fitting Quick Release Pneumatic Connectors Straight Union Two Way Coupler for Tube, Blue
Free ShippingMain highlights- Size: 10pcs of quick connect air hose fittings inner diameter in 3/16 Inches, outer diameter in 13mm / 33/64 inches. S
- Note: Good sealing, push-in design is more convenient, faster, and safer. Make sure the connection is secure to prevent gas leakage. When installing, pay attention to the installation direction to avoid connection errors.
- Instruction: Easy to install or remove, the air hose fitting is flexible and can be rotated freely as needed. It adopts an elliptical ring design. No other tools are required. Just push it gently to complete the installation.
- Application: Straight tube connector is usually used in industrial automation, such as automated production equipment in machinery, automobiles, electronics, packaging, and other industries. It can also be used for ice makers, refrigerators, and cold water filters.
- Advantage: The quick-release connectors air line fittings are made of great PU and plastic, resistant to high pressure, not easy to deform or break, and suitable for long-term use. Built-in stainless steel locking claws make it fit tightly with the connected pipe and not easy to come out.
8.6Very Good
Show more
- 08NovelBee
Novelbee 20FT 6AN Fuel Line Kit 3/8'' Oil Fuel line Hose Fitting Kit Braided Nylon Stainless Steel Fuel line with 10pcs Swivel Hose End Adapter Kit
Free ShippingMain highlights- Size(ID):AN 6;Fuel Hose Length:20FT
- Material:T7 Aluminum Alloy&Stainless Steel&Nylon
- Inner core CPE has excellent corrosion resistance
- Fitting Type: Straight,45 Degree,90 Degree,180 Degree
- Application:Universal,such as fuel,lube,alcohol,ethanol,coolant and air for automobiles or marine engines
8.5Good
Show more
- 09SEIWEI
Brass Hose Fittings, Air Hose Fittings Connector Hose Adapter, Brass Pipe Fittings 5/16" Barb to 3/4" Male Thread Air Line Hose Fitting
Free ShippingMain highlights- We will patiently answer you if you have any questions. If you are not satisfied with our item, please contact us and we will give you refund or replacement.
- This fitting have a large range sizes starting at 1/8" up to 1" BSP male thread with a barbed hose tail. Tubing Dia is 6/8/10/12/16/19/25 mm, sizes given are for the inner diameter of the pipe.
- Made of high quality brass with solid construction, ductility at high temperatures. Hose screw connection made of brass, with male BSP thread, for convenient connection of hoses to the tap.
- Connector used to connect air, water, gas, fuel, oil and inert gas pipes in a simple and quick way. Use with plastic or rubber hose, fit for truck, car, boat, garden, plumbing, heater, furnace repair etc.
- Allows fast and comfortable connection with no tool required, quick joint to make tap and hose connecting easily. Brass hose fitting's threading allows for a tight seal, barbed edges provide positive connection.
8.3Good
Show more
- 10Zivisk
Straight Push Connectors, 4/6/8/10/12 mm Quick Release Plastic Push to Connect Fittings Kit, 50 Pcs Air Line Fittings for 5/32 1/4 5/16 3/8 1/2 Tube
Free ShippingMain highlights- MATERIAL - Safe and reliable material. Energy-saving, pollution-free, low-cost. High pressure resistant and Non Tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
- EASY OPERATION - No extra sealing needed, just need a simple push, provide secure connection.
- DURABLE - The body is Plastic/PE, stainless steel locking claw, NBR O-ring. Each fitting works well and they feel very solid and durable. Once applied, no worries or danger of tubing coming loose. High pressure resistance, can withstand strong pressure without tripping, so no tripping needed, can works for a long time.
- CONVENIENCE - Quick Connect Fittings easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
- APPLICATION - It is widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical.
8.2Good
Show more
