Advertising Disclosure
10 Best gdi intake valve cleaner in Canada
Best Choice01QPKINGQPKING HTS558 GDI Walnut Blaster Kit, 23 Adapters, Intake Valve Cleaner
Main highlights- 【Why Choose HTS558 Walnut Sand Cleaning】 Carbon deposits will reduce the air-fuel ratio, reduce engine output, increase fuel consumption, and cause great damage to the engine. When the combustion in the engine is not sufficient, some hydrocarbon olefin residues will adhere to the engine intake port and cylinder, and the residues on the engine intake port and cylinder will become carbon deposits under the action of high temperature.
- 【Three Years Warranty and Lifelong Maintenance】For the damage caused by non-human factors, we promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
- 【Simultaneous Injection And Recovery】HTS558 Walnut blaster special machine for cleaning the back of the engine intake pipe and intake valve. After closing the intake valve, the walnut sand is sprayed into the engine air intake through the air pump (not included), and the HTS558 recovers the walnut sand through vacuum. Because these two operations form a closed loop, walnut powder will affect the carbon deposition on the inner wall of the intake pipe.
- 【Safe & Efficient】HTS558 Intake Pipe Valve Cleaner Machine uses walnut sand as cleaning agent. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive. As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion.
- 【Integrated Design】The walnut sand of Walnut Blaster Kit for Carbon Cleaning can be sprayed and recycled simultaneously. Built-in dust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Walnut sand residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
- 【High-Quality Material To Avoid Damage To The Machine】 The walnut sand used in HTS558 is a pure natural polishing material. It shows high performance in terms of hardness, compression resistance and wear resistance. Chemical cleaners can corrode the lines and shorten the life of the engine. Cleaning the engine with walnut sand can not only clean the intake pipe and intake valve thoroughly, but also will not cause damage to the engine.
- 【Easy to Operation】Turn off the engine before cleaning, then turn the crankshaft to close the intake valve, and use a high-pressure air pump (not included) to inject walnut powder (not included) into the intake port of the engine. The built-in dust filter of Automotive Engine Carbon Deposition Cleaner help to separate and recover walnut sand from carbon deposits, thus forming a complete cleaning closed loop.
- 【 Special Machine For Removing Carbon Deposits】HTS558 Engine Intake Valve Cleaner is a special machine for cleaning the carbon deposits on the intake pipe and the back of the intake valve of the automobile engine, which can deeply remove the high-viscosity carbon deposits on the intake manifold and intake and exhaust valves. After cleaning, the engine can be kept in a healthy state and ensure the efficient operation of the engine.
- 【 23pcs Car Model Adapter】HTS558 Walnut Sand DE-Carbon Cleaner Compatible For BMW; Compatible For Volkswagen; Compatible For BMW B38/B48/B58; Compatible For Volkswagen Porsche 2.4/2.5/2.8/3.0; Compatible For Volvo; Compatible For GM; Compatible For Toyota; Compatible For Honda; Compatible For GM; Compatible For BMW; Compatible For Nissan; Compatible For Honda; Compatible For Trumpchi; Compatible For BMW N54/N55; Compatible For Volkswagen EA211; Compatible For Benz; Compatible For Volkswagen 2.4/2.8; Compatible For Benz; Compatible For BMW N26/N49; Compatible For Benz 270/240; Compatible For Land Rover;
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02QPKING
QPKING HTS558 Walnut Blaster Kit, 1200W GDI Intake Valve Carbon Cleaner
Main highlights- USE THE CORRECT SERVICE PROCESS – Remove the intake manifold when required, make sure the serviced intake valve is fully closed, select the correct adapter and wear suitable eye and respiratory protection. Cleaning time and repeat passes vary by engine design and deposit severity.
- EXTERNAL COMPRESSOR REQUIRED – The air compressor is not included. Use a compatible air source above 0.7 MPa / 7 bar / 102 PSI and confirm the shop air fitting before use. Verify the voltage on the delivered unit before connecting power.
- 23-ADAPTER SERVICE KIT – Includes 23 adapters for different intake-port shapes and working positions, plus spray and recovery accessories. Adapter fit is not universal; compare the engine layout and adapter dimensions before ordering.
- 13L TANK WITH MEDIA RECOVERY – The 13L tank and included 2 kg walnut shell media support longer cleaning sessions with fewer refills. An integrated spray-and-recovery design and built-in dust filter help collect media and reduce workshop mess.
- 1200W WALNUT BLAST CLEANING – The HTS558 uses walnut shell media and compressed air to help remove carbon deposits from intake valves, intake ports and manifolds. Designed for GDI and direct-injection engine service in repair shops and by experienced DIY users.
9.7Exceptional
Show more
- 03CRC
CRC 05319 Intake Valve Cleaner 11Oz
Main highlights- Proven to remove up to 46% of GDI Intake Valve deposits in 1 hour
- Proven to clean intake valves on GDI engines and turbo systems
- Highest concentration PEA (Polyether Amine) detergency available
- Easily installed through the air intake system
- 150X more concentrated than fuel additives
9.6Exceptional
Show more
- 04
Liqui MolyLIQUI Moly Valve Clean | 150 ml | Petroladititive | SKU: 2001, Blue
Main highlights- Protection against corrosion and carburetor icing
- Lower pollutant emissions
- Lower fuel consumption
- Better engine performance.Fit Type: Universal
9.3Excellent
Show more
Value for Money05
Liqui MolyLiqui Moly Valve Clean (150 ML) - 2 Pack
Main highlights- Better engine performance Lower fuel consumption Lower pollutant emissions Protection against corrosion and carburetor icing Stops pinging, knocking, hesitation and dieseling
9.0Excellent
Show more
- 06Jieotwice
GDI Engine Intake Valve Cleaner Tool, Fuel System Cleaning Kit for Direct Injection Carbon Removal, Catalytic Converter & Throttle Body Maintenance
Main highlights- No-disassembly operation protects the engine structure, eliminating the need to disassemble core components like the cylinder head and intake manifold.
- It addresses the carbon deposit problem of direct injection vehicles while balancing safety and cost-effectiveness, gradually becoming a mainstream cleaning solution in the automotive aftermarket.
- Improves performance and reduces subsequent repair costs. After cleaning, it quickly restores engine power, reduces idle vibration, and reduces exhaust emissions. It also prevents serious problems such as valve sticking and piston ring wear caused by long-term carbon deposit accumulation.
- Highly efficient and safe, it's compatible with a wide range of vehicle models and fuel types. It utilizes low-pressure pulse or high-pressure atomization technology, which does not corrode metal parts Compatible with mainstream gasoline direct injection (GDI) and turbocharged direct injection (T-GDI) vehicles.
- Convenient operation saves time and effort. The device comes with a built-in intelligent control program that allows preset cleaning time and pressure parameters. Once connected, it starts with a single click for fully automated operation.
8.9Very Good
Show more
- 07LeTkingok
GDI Intake Valve Cleaning Tool - Three-Way Catalytic Converter Restorer, Direct Injection Carbon Deposit Remover - DIY/Professional Auto Maintenance for Gasoline Engines
Main highlights- No-disassembly operation protects the engine structure, eliminating the need to disassemble core components like the cylinder head and intake manifold.
- It addresses the carbon deposit problem of direct injection vehicles while balancing safety and cost-effectiveness, gradually becoming a mainstream cleaning solution in the automotive aftermarket.
- Improves performance and reduces subsequent repair costs. After cleaning, it quickly restores engine power, reduces idle vibration, and reduces exhaust emissions. It also prevents serious problems such as valve sticking and piston ring wear caused by long-term carbon deposit accumulation.
- Highly efficient and safe, it's compatible with a wide range of vehicle models and fuel types. It utilizes low-pressure pulse or high-pressure atomization technology, which does not corrode metal parts Compatible with mainstream gasoline direct injection (GDI) and turbocharged direct injection (T-GDI) vehicles.
- Convenient operation saves time and effort. The device comes with a built-in intelligent control program that allows preset cleaning time and pressure parameters. Once connected, it starts with a single click for fully automated operation.
8.7Very Good
Show more
- 08CRC
CRC 05319-12PK Intake Valve Cleaner (12/11Oz)
8.6Very Good
- 09
Liqui Moly
Liqui Moly (2001-20PK) Valve Clean - 150 ml, (Pack of 20)
Main highlights- Stops pinging, knocking, hesitation and dieseling
- Protection against corrosion and carburetor icing
- Lower pollutant emissions
- Lower fuel consumption
- Better engine performance
8.4Good
Show more
- 10iDili
iDili Gasoline Direct Injection GDI Intake Air Cleaning, Three-Way Catalytic Direct Injection Repair System Cleaning Device
Main highlights- 5. It addresses the carbon deposit problem of direct injection vehicles while balancing safety and cost-effectiveness, gradually becoming a mainstream cleaning solution in the automotive market.
- 4. The device comes with a built-in intelligent control program that allows preset cleaning time and pressure parameters. Once connected, it starts with a single click for fully automated operation.
- 3. After cleaning, it quickly restores engine power, reduces idle vibration, and reduces exhaust emissions. It also prevents serious problems such as valve sticking and piston ring wear caused by long-term carbon deposit accumulation.
- 2. It's compatible with a wide range of vehicle models and fuel types. It utilizes low-pressure pulse or high-pressure atomization technology, which does not corrode metal parts Compatible with mainstream GDI and turbocharged direct injection vehicles.
- 1. No-disassembly operation protects the engine structure, eliminating the need to disassemble core components like the cylinder head and intake manifold.
8.3Good
Show more
