Advertising Disclosure
10 Best frsky receiver in Canada
Best Choice01FrSkyFrSky TD SR12 Dual-Band Receiver 900MHz & 2.4GHz | ADV Stabilizer 12 Configurable Channels Triple Antenna Dual XT30 Power Input Telemetry Black Box OTA Update SBUS/FBUS/S.Port Support
Main highlights- Simultaneous Working Dual-Band (900M/2.4G) TD Mode Dual Power Balancing Consumption Built-in Advanced Stabilization Functions
- Operating Current: ≤170mA Continuous Current: ≤20A (power the device) | Instaneous Current: ≤40A (power the device) Voltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
- Frequency: 900MHz & 2.4GHz Dimension: 48.5*33*17.9mm (L*W*H) Weight: 23g Operating Voltage: 3.5-10V (Recommend 2S Li Batteries)
- FBUS / S.Port SBUS Out Port (Supports 16CH / 24CH mode) SBUS In Port (Supports Signal Redundancy) Over-The-Air (OTA) FW Update
- Compatibility: Tandem series radio & TD protocol capable RF module Dual XT30 Power Input Connector Triple Antenna Design (2×2.4G & 1×900M antennas)
- Built-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.) Basic Black-Box Data Record Function Built-in Power Switch Function | Match with Different External Switches (Optional)
- 4ms Race Mode with Telemetry Long Control Range (Range varies based on the RF Power settings.) 12 Configurable Channel Ports – CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In (Redundancy Func.) – CP2-12: PWM / SBUS Out / FBUS / S.Port
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money02FrSkyFrSky TD SR10 Dual-Band Receiver Simultaneous 2.4GHz & 900MHz Advanced Stabilizer & Telemetry Triple Antenna Design 10 Configurable Ports Black Box Function Long Range & Low Latency
13% OffMain highlights- The configurable 10 channel ports are a big feature of TD SR10, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.
- The Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The data (Power & Signal related) under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module.
- The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.
- In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc. The advanced stabilizer feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilization receiver.
- ADV Stabilizer The TD SR10 offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.
9.7Exceptional
Show more
- 03FrSky
FrSky Archer Plus R6 Receiver 6 PWM Channels, 24 SBUS Channels, Supports Signal Redundancy & Telemetry for Remote Control
Main highlights- The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
- The Archer Plus R6 6 high-precision PWM channel receivers are ideal for any type of glider pilot, it supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The R6 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
- Number of Channels: 6/24 channels 6 High-precision PWM & 16 SBUS channels Mode 6 High-precision PWM & 24 SBUS channels Mode Operating Voltage Range: 5 -10V Operating Current: ＜65mA@5V Operating Range: ＞2km (Full range)(*Range may vary based on local conditions.) Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Antenna connector: IPEX4 Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function 6 high-precision PWM channel ports SBUS Out port（Supports 16ＣＨ／24CH mode） Supports signal redundancy (SBUS In) Full control range with telemetry (S.Port or FBUS) Over-The-Air (OTA) FW update External battery/device voltage detection
9.6Exceptional
Show more
- 04FrSky
FrSky Archer Plus SR10+ Receiver 3-Axis Gyro & Accelerometer 10 Configurable Channels Access & ACCST D16 Compatible Anti-RF Interference FBUS & S.Port Telemetry Black Box Data Logging
Main highlights- ● FW Over-The-Air (OTA) Update ● Voltage Detection of External Battery/Device ● Compatibility: 2.4GHz ACCESS Compatible Transmitters / ACCST D16
- The SR10+ supports full signal strength with two detachable antennas and guarantees optimal reception and range of the antenna. The SR10+ can be used as the main receiver in a redundant solution by setting a port as an SBUS input and connecting to any other FrSky receiver with an SBUS output port.
- The FBUS protocol allows Archer Plus series receivers to open the ability to connect multiple telemetry devices (XACT servos, ADV sensors, etc.) trouble-free coupling and simplify the configuration of structures.
- The Archer Plus SR10+ are stabilized gyroreceptors with a built-in 3-axis gyroscope and a 3-axis accelerometer and feature different flight modes (automatic level, stabilization, Knife-Edge, etc.) and configuration methods. SR10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS or S.Port.
- Improved RF interference capability with stronger RF performance ● Intelligent ACCESS & ACCST D16 modes ● Supports the Black-Box basic function (later available by updating the FW.) ● Built-in 3-axis gyroscope and 3-axis accelerometer sensor ● Multiple flight modes and configuration tools (ETHOS, LUA scripts etc.) ● 10 configurable channel ports (PWM, SBUS, FBUS or S.Port) ● Supports signal redundancy (SBUS In) ● Full operating range with telemetry (S.Port or FBUS) ● Anti-interference ability in the spark ignition process
9.5Excellent
Show more
- 05FrSky
FrSky X8R 2.4G 16CH SBUS Smart Port Telemetry Receiver
Main highlights- Operating Voltage Range: 4V-10.0V
- Operating Range: >1.5km (Full Range)
- Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please consider you mind or not before buying.
- Dimension: 46.5 x 27 x 14.4mm (1.83" x 1.06" x .56")
- Condition:New
9.4Excellent
Show more
- 06FrSky
FrSky Archer Plus R10+ Receiver – 10 Configurable Ports Dual Detachable Antennas Access & D16 Compatible Enhanced Anti-RF Interference Black Box & Telemetry SBUS/FBUS Support
11% OffMain highlights- With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup. This receiver also supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range.
- The R10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The R10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port.
- Full control range with telemetry (S.Port or FBUS) ● Anti-interference capability in the spark-ignition process ● Over-The-Air (OTA) FW update ● External battery/device voltage detection
- Enhanced Anti RF-Interference capability with more solid RF performance ● Smart-matched ACCESS & ACCST D16 modes ● Supports basic Black-Box function (Available later by updating the FW.) ● 10 configurable channel ports (PWM, SBUS, FBUS, or S.Port) ● Supports signal redundancy (SBUS In)
- Control Range: Full range* with telemetry (*Full Range: ＞2km, the range may vary based on local conditions.)Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- 10 Configurable Channel Ports CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In CP2-10: PWM / SBUS Out / FBUS / S.Port ●SBUS Out (Supports 16CH / 24CH mode)
9.3Excellent
Show more
- 07FrSky
FrSky TD R6 Dual-Band Receiver Simultaneous 2.4GHz & 900MHz 6 PWM Outputs SBUS Out & FBUS/S.Port Long Range Up to 100KM Black Box Lightweight 4ms Race Mode OTA Firmware Update
Main highlights- The Tandem series receivers adopt a dual-band antenna design (2.4GHz & 900MHz) that provides multi-directional wide coverage for the remote signal. The telemetry data (Power & Signal related) can be recorded using the built-in black box module within the Tandem receiver, useful for capturing data from any unusual status during the flight.
- TD R6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides two 3-pin ports accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- Simultaneous working 2.4G&900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Black Box function 4ms race mode with telemetry
- Long control range (up to 50KM – 100KM) Over-The-Air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- Frequency: 2.4GHz & 900MHz Dimension: 47.5*20.4*10.9mm (L*W*H) Weight: 11.5g Operating Voltage: 3.5-10V(recommend 3.7-8.4V) Operating Current: ≤110mA@5V
- Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connector: IPEX1
9.2Excellent
Show more
- 08FrSky
FrSky Archer Plus SR12+ Receiver 12 Channels Built-in 3-Axis Gyro & Accelerometer Multiple Flight Modes Dual Detachable Antennas Full-Range Signal SBUS in Redundancy XT30 Dual Power Telemetry Support
Main highlights- These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
- The SR12+ receivers have 12 configurable channel ports*, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The SR12+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range.
- The SR12+ can be used as a Primary receiver in a redundant solution by setting a port (Channel Port 1) as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
- The SR12+ also provides a socket that can be used to connect the switch panel to enable the built-in Power Switch function, and it uses a set of standard XT30 plugs which also provides a safe and efficient way to provide power. By utilizing together with current overload wires on the channel ports, the connected device can be safeguarded. (*Some features require the support of ACCESS and ETHOS.)
- The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process.
- The Archer Plus SR12+ are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.). The stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes.
- Enhanced Anti RF-Interference Capability with more Solid RF Performance Smart-Matched ACCESS & ACCST D16 modes Built-in 3-Axis Gyroscope & 3-Axis Accelerometer Sensor Basic Black-Box Data Record Function Built-in Power Switch Function | Match with Different External Switches (Optional)
- Dimension: 48.5×33×17.9mm (L×W×H) Weight: 21.5g Operating Voltage Range: 3.5 -10V (Recommend 2S Li-Batteries) Operating Current: ＜115mA@5V Continuous Current: ≤20A (power the device) ｜ Instaneous Current: ≤40A (power the device) Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
- Antenna connector: IPEX1 Dual XT30 Power Input Connector Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters 12 Configurable Channel Ports (ACCESS mode) CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In CP2-12: PWM / SBUS Out / FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- 12 Configurable Channel Ports* (PWM, SBUS, FBUS, or S.Port) (Note: In ACCST mode, SBUS Out is assigned on Pin11 & S.Port is on Pin12.) Supports Signal Redundancy (SBUS In) Full Control Range with Telemetry (FBUS / S.Port) Anti-Interference Capability in the Spark-Ignition Process Over-The-Air (OTA) Firmware Update External Battery/Device Voltage Detection
9.1Excellent
Show more
- 09FrSky
FrSky TD SR6 2.4G/900M Dual-Band Receiver with 6 PWM Channels, Built-in Stabilization & Black Box Function for Telemetry Devices
Main highlights- TD SR6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides output pins accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- Stabilization Function The TD SR6 offers an enhanced Stabilization function which is an upgrade over the original classical gyroscope stabilization modes. The TD SR6 offers an advanced mode that provides more programmable stabilized channels and flexibility. The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.
- Simultaneous working 2.4G&900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Built-in Stabilization Function Black Box function 4ms race mode with telemetry Long control range (Range varies based on the RF Power settings.) Over-The-Air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc.
- Frequency: 2.4GHz & 900MHz Dimension: 47.5×20.4×10.9mm (L*W*H) Weight: 11.5g Operating Voltage: 3.5-10V (recommend 3.7-8.4V) Operating Current: ≤110mA@5V Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connector: IPEX1 Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
8.9Very Good
Show more
- 10FrSky
FrSky RX8R PRO Receiver Including Redundancy 2.4G ACCST 8/16CH SBUS Telemetry Receiver
10% OffMain highlights- Support redundancy function
- Strong anti-interference performance
- Smart Port enabled and support telemetry data transmission
- Lower latency on the PWM output
- Higher precision deviation of PWM
8.8Very Good
Show more
