Advertising Disclosure
10 Best fpga development board in Canada
Best Choice01Earth People TechnologyAltera Cyclone IV FPGA Development Board - DueProLogic
Main highlights- Two PMOD connectors, Two Slide Switches, Two PushButton Switches, Plenty of I/O for all your projects.
- The DPL contains two oscillators, 66MHz and 100MHz. The 66MHz oscillator is used to provide clocking for the EPT ActiveHost USB communications core. The 100MHz oscillator can be used by the user clocked up using one of the onboard Clock-DLL modules.
- Built in programmer cable allows configuring the FPGA with a single USB-C cable. The DPL can be powered from the USB cable or from the Barrel Connector. A separate JTAG header can also be used to program the FPGA using a compatible USB Blaster cable.
- Altera Cyclone IV FPGA includes 6,000 Logic Elements with two clock multipliers. The Cyclone IV FPGA is the perfect balance of inexpensive cost versus plentiful logic cells, 20KBytes of SRAM, and General Purpose Input/Output pins. This is a great board to learn how to program FPGA's.
- 70 Inputs/Outputs originating at the FPGA are available at Stackable Headers organized around the edge of the board. The user can configure these I/O's using the FPGA project code.
- 6x6 LED Array allows character and animations to be displayed at ultra fast speed. LED blocks can be individually turned on/off to allow LED signals to be used as I/O's
9.9Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Earth People Technology
Earth People Technology Cyclone 10 FPGA - Development Board - CycloFlex
Main highlights- There are two power options for the CycloFlex: USB-C connector or Barrel Connector. The USB-C options allows +5VDC through the USB 2.0 specification. Any USB-C charger or Laptop will properly power the CycloFlex. The Barrel Connector accepts +4.5 to +5.5VDC at 3Amps.
- The CycloFlex includes Three Seven Segment Displays which are directly drivable from FPGA I/O pins. 65 Inputs/Outputs from the FPGA available at board connectors. There are seven Green User LEDs that can be controlled directly from FPGA pins. One RGB LED is also included. Two Pushbuttons are available for input to user code.
- The CycloFlex Development Kit comes complete with downloadable User Manual, Data Sheet, Drivers, Schematics, and compiled, source code, projects. The downloadable DVD has an entire tutorial on Getting Started with FPGA. It walks the user through getting the ModelSim/Questa simulation tool setup. It has guides to creating simple code for FPGAs through more advanced Test Benches. It also includes full projects with source code to communicate with the CycloFlex from a Windows PC.
- One 50MHz oscillator provides all precision clocking needs on the CycloFlex Board. The FPGA includes four DLL's that provide both frequency multiplier and divider. This provides a broad range for clocking options for user code.
- Altera 10CL016 FPGA with 16,000 Logic Elements. This FPGA Development Kit requires an external JTAG Programmer. The Cyclone 10 FPGA is a powerful mid-range chip from Altera. It contains 504 Kbits of SRAM Memory. This chip is perfect for implementing soft core processors such as a RISC-V.
9.8Exceptional
Show more
- 03UEEGO
Sipeed Tang Nano 20K FPGA Development Board, Open Source RISCV Linux Retro Game Player with 64Mbits SDRAM 20K LUT4, Single Board Computer Support microSD RGB LCD LED JTAG HDMI Port (Already Welded)
Main highlights- [Support] "wiki.sipeed.com/hardware/en/tang/tang-nano-20k/nano-20k.html".
- [RISC-V Linux] Sipeed Tang Nano 20K development board runs the RISC-V Linux system, enabling seamless retro gaming experiences with nano tang.
- [Onboard Debugger] The BL616 chip on the Sipeed Tang Nano 20K development board provides JTAG download functionality for the FPGA, USB-to-serial communication with the FPGA, a virtual serial port for FPGA SPI communication, and a virtual serial port to control the MS5351 clock output.
- [FPGA Chip] Sipeed Tang Nano 20K employs the GW2AR-18 QN88 FPGA chip, featuring 20,736 LUT4 logic units and 15,552 registers. It incorporates two internal PLLs and multiple DSP units supporting 18-bit x 18-bit multiplication for accelerated digital computation.
- [Application Scenarios] Sipeed Tang Nano 20K development board supports game console emulation, RGB display control, multi-screen output, 20K LUT4, and RISC-V soft core experimentation.
9.7Exceptional
Show more
- 04Earth People Technology
Altera MAX10 FPGA Development Board - MaxProLogic
Main highlights- The board includes a 50MHz Oscillator to provide high speed control over internal gates of the MAX 10 FPGA. With 4K Logic Elements, the User can create powerful projects. The MaxProLogic is 100% compatible with the Free Quartus Prime Lite software from Altera. Just download the Quartus software from Altera, and the User can create projects, compile the code, simulate the project in a digital simulator, then download to the MAX 10 using an external programmer.
- Complete Development Kit with tutorials and source code. Please visit the MaxProLogic product page under the earthpeopletechnology website to access all schematics, user manual, data sheets and project files. The MaxProLogic tutorials will get the beginner up and learning Programmable Logic very quickly.
- Altera 10M04SA FPGA with 4,000 Logic Elements. This FPGA Development Kit requires an external JTAG Programmer. The MAX10 FPGA is a great chip to learn FPGA programming with. The MAX10 includes the configuration flash, 12 bit ADC, 20KByte of SRAM and low voltage regulators on chip.
- 8 Green User configurable LEDs, On/Off controller. 1 Power Pushbutton Switch; 1 User Configurable Pushbutton Switch. Source code is available to assist the user in understanding how get up and running with the MaxProLogic board.
- 8 Analog Input Channels; 12 bit; 1MSamples/Second. 65 Available I/O’s at connectors. A full datasheet of the MaxProLogic is available that describes all the hardward connections. Schematic is available to give the User further information about the hardware.
9.4Excellent
Show more
Value for Money05WayPonDEVSipeed Tang Nano 20K GW2AR-18 QN88 FPGA Development Board with 64Mbits SDRAM 828K Block SRAM Linux RISCV Single Board Computer for Retro Game Console Support microSD RGB LCD JTAG Port
13% OffMain highlights- [Wiki] "https://dl.sipeed.com/shareURL/TANG/Nano_20K/1_Datasheet";Any after-Sales Privems, Please Contact us by click "Waypondev" store and ask a question or leave the message in our forum by "forum.youyeetoo .com/".
- [USB2.0 HS interface] The 27MHz crystal generates the clock for HDMI display, onboard MS5351 clock generating chip also provides mutiple clocks.Support Serial communication, high-speed SPI reception.
- [Onboard Debugger ] Sipeed Tang Nano 20K Development Board support JTAG for FPGA, USB to UART for FPGA,USB to SPI for FPGA communication, Control MS5351 generate frequency
- [FPGA Chip] GW2AR-18 QN88 FPGA Chip containing 20736 LUT4 logic cells and 15552 Filp-Flops.There are 2 PLL in this FPGA chip, and many DSP units supporting 18 bit x 18 bit multiplication
- [Application scenarios] Tang Nano 20K Open source Development Board supports game console emulators, drives RGB screens, multiple display outputs, 20K LUT4, RISC-V soft-core experiments.
9.3Excellent
Show more
- 06MiiElAOD
Sipeed Tang Nano 9K FPGA Development Board Gowin GW1NR-9 RISC-V HDMI (Tang Nano 9k)
Main highlights- WIKI：wiki.sipeed.com/hardware/zh/tang/Tang-Nano-9K/Nano-9K.html
- TANG NANO 9K is ENTRY-LEVEL FPGA KIT FOR RISC-V
- Package: 1pcs Tang Nano 9K Board
- Logical Unit ( LUT4)：8640/Flip-Flop (FF)：6480/Shadow SRAMSSRAM ( bits )：17280/Block SRAM：468K
- High Performance DSP：Support 9x9,18x18,36x36bit/Smultiplier and 54 bits accumulator
- BSRAM/BSRAM Quantity：26 /User Flash ( bits )：608K/ PSRAM ( bits )：64M
9.1Excellent
Show more
- 07WayPonDEV
Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code
Main highlights- [Verilog Design] Sipeed Tang Primer 20K Dock FPGA single board computer use verilog to design custom hardware func-tions on the basic of PicoRV/Litex lP core, and at thesame time use C language to write code running onPicoRV/Litex core.
- [Run RISC-V Code] Sipeed Tang Primer 20K gowin fpga development boards can burn the hardware code bitstream file ofPicoRV/Litex to Gw2A, and then use GW2A as acommon MCU. lt can run RISC-V code, conduct RISC-v soft core experiments
- [Rich Peripheral interfaces] Sipeed Tang Primer 20K Dock is equipped with a wealth of pe-ripheral resources, such as onboard USB-JTAG & UARTperipheral , Ethernet PHY and RJ45 connector, USB2.0PHY，HDMIl output connector,Audio output circuit and3.5mm connector，RGB screen connector,DVP cameraconnector.
- [PMOD interfaces] Sipeed Tang Primer 20K Lite ext-board routes so many lOs todouble row pin headers and PMOD interfaces, with whichusers could easily connect other peripheral modules or cir-cuits for secondary development.
- [High-performance DSP] Sipeed Tang Primer 20K Core Module board is sodimm package,uses GW2A-LV18PG256C8I7 as the main chip, and hasmultiple internal resources, such as high-performance DSP,high-speed LvDs interface and BSRAM resources, on-boardDDR3 and PMIC. Users could use this CM board for rapiddevelopment and verify, and it's suitable for high-speedand low-cost situations.
8.9Very Good
Show more
- 08NUEAYMS
FPGA prototyping board with USB UART I2C port EP4CE6E22C8N developed for industrial automation development and automation
Main highlights- Widely used in automatic production line, robotic control and other fields. Efficient real-time data processing capability improves intelligent industrial equipment
- Various hardware explanation languages allow users to implement rapid prototype development and verification according to the requirements of the project, greatly improve the efficiency of product development
- USB, UART, I2c Provides stable data transmission capabilities to meet the needs of a variety of application scenarios
- EP4CE6E22C8N development board is based on FPGA, equipped with 22K units and resources, which can efficiently handle complex algorithms, suitable for processing and other applications
- Adopts EP4CE6E22C8N integrated FPGA Compared to traditional lower end FPGA development boards, its units and resources are more abundant and suitable for more complex application development
8.8Very Good
Show more
- 09UEEGO
Sipeed Tang Nano 20K FPGA Development Board, Open Source RISCV Linux Retro Game Player with 64Mbits SDRAM 20K LUT4, Single Board Computer Support microSD RGB LCD LED JTAG HDMI Port (Not Welded)
Main highlights- [Support] "wiki.sipeed.com/hardware/en/tang/tang-nano-20k/nano-20k.html".
- [RISC-V Linux] Sipeed Tang Nano 20K development board runs the RISC-V Linux system, enabling seamless retro gaming experiences with nano tang.
- [Onboard Debugger] The BL616 chip on the Sipeed Tang Nano 20K development board provides JTAG download functionality for the FPGA, USB-to-serial communication with the FPGA, a virtual serial port for FPGA SPI communication, and a virtual serial port to control the MS5351 clock output.
- [FPGA Chip] Sipeed Tang Nano 20K employs the GW2AR-18 QN88 FPGA chip, featuring 20,736 LUT4 logic units and 15,552 registers. It incorporates two internal PLLs and multiple DSP units supporting 18-bit x 18-bit multiplication for accelerated digital computation.
- [Application Scenarios] Sipeed Tang Nano 20K development board supports game console emulation, RGB display control, multi-screen output, 20K LUT4, and RISC-V soft core experimentation.
8.5Good
Show more
- 10youyeetoo
youyeetoo Sipeed Tang Primer 20K FPGA Development Board MCU, with LUT4, PMOD Port *4, for RISC-V and Embedded Development (with Dock ext-Board)
Main highlights- 【Minimalist IDE】Comapred with other FPGA IDE, the lDE which is used to develop Tang Primer 20K is really small, the hard disk capacity occupied after installation does not exceed 1G.
- 【Feature】Tang Primer 20K core board uses GW2A-LV18PG256C8I7 as the main chip, which has rich internal resources such as high-performance DSP, high-speed LVDS interface and BSRAM memory.
- The core board is equipped with peripheral components such as DDR3 memory particles and power ICs, so that users can use the core board alone to quickly develop and verify projects for high-speed and low-cost applications.
- The Lite ext-board leads out many I0s through pin headers and PMOD interfaces, and users can easily connect other peripheral modules or circuits for secondary development.
- The Dock ext-board is equipped with a wealth of peripheral resources, such as onboard USB-JTAG & UART circuit, Ethernet PHY and RJ-45 connector, USB2.0 PHY, HDMI output interface, stereo output circuit and 3.5mm headphone connector, RGB Screen connector, DVP camera connector. 【ASIN】B0BNVQVHG6
- Shipping list: Dock ext-Board package, 【WIKI】wiki.sipeed.com/hardware/en/tang/tang-primer-20k/primer-20k.html
8.2Good
Show more
