10 Best flush toilet mechanism in Canada

Advertising Disclosure

Last Updated - 2025/05/11

Best Choice

01
Danco

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

Free Shipping

8.2 Easy installation

8.0 worth the money
Main highlights

WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a 2-button, dual flush toilet that saves water by reducing the amount of water used with each flush.
NO WARP SEAL: Permafit silicone seal is Chlorine and chemical resistant and will not warp. LightTouch button
HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required.
ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
DUAL-FLUSH FRONT & SIDE-MOUNT PUSH-BUTTON HANDLE: One button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper - the setting needed 4 out of 5 times. The second Full Flush button uses the normal amount of water for solids.
DETECTS LEAKS: Detects leaks and signals when a leak is found.
COMPLETE KIT: Combines two products that together will increase your toilet's efficiency: HYR270 Dual Flush Valve and HC660 HydroClean fill valve.
COMPATIBILITY: Works with standard 2 in. flush valves and requires 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. Not compatible with Mansfield toilets.
CLEANS TOILET TANK: Jets clean toilet tank and parts with every flush.
CALIBRATION: The Total Repair Kit can be calibrated to adjust the exact amount of water needed, saves water.
Show more
9.8

Exceptional

Show more
Curious about how we select the top products for you? Explore How It Works

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service levels, popularity trends, and more. The rankings reflect our opinion and should be a good starting point for shopping. By purchasing the products we rank, you’ll get the lowest price we found while we may receive a commission at no cost to you, which will help us continue to provide you with value.
02
Fluidmaster

Fluidmaster 400ARHRKP10 PerforMAX Universal High Performance All in One Repair Kit for 2-Inch Flush Valve Toilets, Easy Install

Free Shipping

9.5 Simple to use

9.3 Easy installation

8.9 Noise level
Main highlights

UNIVERSAL DESIGN: PerforMAX toilet fill valve with 2X greater refill rate adjusts easily from 10 – 15 inches and is ideal for use in high efficiency 1.28 to 1.6 gallons per flush toilets
PREMIUM TOILET PERFORMANCE: All in one toilet repair kit replaces inefficient fill and flush valves, leaky flappers, and broken toilet handles to make your toilet run like new
HIGH PERFORMANCE FLAPPER: PerforMAX 507AK high performance 2-inch adjustable water-saving toilet flapper eliminates twisting and ghost flushing to maximize water usage with each flush, Deteriorating or damaged flush valve
Effectively control fill and flush volume, while upgrading toilet parts
EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again
Show more
9.6

Exceptional

Show more
03
Fluidmaster

Fluidmaster 400H-002 Performax Universal Toilet Fill Valve High Performance Tank and Bowl Water Control, 1-Pack, Multicolor

Free Shipping

9.9 Easy installation

9.7 Stability

9.5 worth the money
Main highlights

Universal fit for most toilet models and brands
Tank and Bowl water level adjustment dials to customize the perfect flush and save. EZ-Twist height adjusts from 9 in. to 14 in. to fit more tanks
Fix noisy, or slow filling fill valves with the quietest, most powerful toilet fill valve available
Easy to install, step-by-step instructions included
Show more
9.5

Excellent

Show more
04
Fluidmaster

FLUIDMASTER 400A Anti-Siphon Toilet Fill Valve, Black

Free Shipping

9.9 Simple to use

9.9 Easy installation

9.3 worth the money
Main highlights

Plastic and non-corrosive
Adjustable float saves water
9" to 14"
Show more
9.4

Excellent

Show more
Value for Money

05
Fluidmaster

Fluidmaster 402CARHRP14 PerforMAX Toilet Fill Valve & Flapper Kit

Free Shipping
Main highlights

Solid Frame flapper eliminates twisting and ghost flushing
Per for max products provide optimal performance while saving both water and money
Fixes all common problems like toilets that are running, leaking, noisy, ghost flushing or have a weak flush
Chlorine and hard water resistant
Built in microban fights flapper breakdown due to bacteria on the flapper itself
Show more
9.3

Excellent

Show more
06
Korky

Korky 528 Korky Quiet Fill Toilet Fill Valve, Black

Free Shipping

9.7 Easy installation

9.5 worth the money

9.5 Stability
Main highlights

Universal replacement for faulty fill valves and ballcocks
Proven quietest in laboratory testing
Five year guarantee
Engineered materials resist chlorine
Easiest to install and adjust
Show more
9.1

Excellent

Show more
07
RDEXP

RDEXP White 7.48inch Height Toilet Bottom Inlet Fill Valve Split Push Button Dual Flush Cistern Syphon

Free Shipping

9.5 worth the money

9.1 Easy installation
Main highlights

installation method: 1. Measure the height from the raised part in the middle of the water tank to the edge to see if the height of the toilet is uniform. Please measure normally. 2. Measure the size of the water tank drainage hole. 3. Rotate the drain valve and lift it up, and disassemble the main body. 4. Tighten the screws to fix the base.
Please confirm the information before purchasing: 1. Is it a one-piece toilet or a split toilet? 2. Is the toilet button located from the top, side or front? 3. The height of the toilet water tank for side buttons needs to be above 180mm, and the side button hole must be a round or square hole with a diameter of 18-25mm; if the button hole is on the top, the height of the water tank needs to be above 260mm! The diameter of the top button hole is within 38mm!
Notice: 1. When selecting the drain valve, make sure that the height of the water tank is equal to the sum of the heights of the drain valve and the water tank button. The height of the water tank can also be slightly smaller than the sum of the heights of the drain valve and the water tank button (by adjusting or shortening the trigger rod of the water tank button) 2. Ensure that the drainage hole diameter of the drain valve (i.e. the inner diameter of the sealing ring) must be equal to the water tank diameter.
HighPlease confirm the information before purchasing: 1. Is it a one-piece toilet or a split toilet? 2. Is the toilet button located from the top, side or front? 3. The height of the toilet water tank for side buttons needs to be above 180mm, and the side button hole must be a round or square hole with a diameter of 18-25mm; if the button hole is on the top, the height of the water tank needs to be above 260mm! The diameter of the top button hole is within 38mm! efficiency and water saving, gentle and professional, can effectively improve the flushing performance of your toilet. Aging resistance, Water-saving,Two-piece float, momentary shut-off
Dimensions: Washer outer diameter: 85mm/3.35 inches, Height: 210mm/8.27 inches (excluding base height), Overall width: 118mm/4.65 inches, Base diameter (without washers): 65mm/2.56 inches
Applicable brands: replacement for TOTO, replacement for KOHLER and other brands of one-piece side toilet tank.
Show more
8.9

Very Good

Show more
08
LASCO

Lasco 04-2353 Replacement Flush Valve for 1 Piece Toilets with Flapper and Chain, Fits 3-Inch Flush Valve

Free Shipping

9.7 Easy installation

9.5 worth the money
Main highlights

UNIVERSIAL FIT: Replacement unit fits most 1-piece toilets with 3-Inch flush valves
TRUSTED SINCE 1930: Larsen Supply is 3rd Generation, Family owned and operated for over 80 years with 1000s of plumbing products to help you get the job done quickly
SAVES BIG MONEY: Replace components instead of the entire toilet to save money for other projects
PREVENT WATER LEAKS: Helps you save money by replacing parts back to OEM quality instead of the entire unit
HELPS YOU REPLACE BROKEN FLUSH VALVE: For One-Piece Toilets with flapper and chain and 3-inch valve. This complete kit will help you quickly swap out worn out flush valves
EASY TO USE: Universal fits most 1 piece toilets with 3-Inch valve. Includes flapper and chain
COMPLETE REPLACEMENT KIT: Comes with flapper and chain. Complete kit will help you quickly swap out worn out flush valves
Show more
8.8

Very Good

Show more
09
Danco

Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

Free Shipping
Main highlights

TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition.
TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves.
TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank.
TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75 inches and the length of the float is 5.5 inches ; when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75 inches .
SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications
EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench.
Show more
8.7

Very Good

Show more
10
Fluidmaster

Fluidmaster 507AKP7 Flush Valve Kit

Free Shipping
Main highlights

Saves water and stops leaks at the drain
Replaces any 2-inch flush valve in a two-piece toilet
Includes bolts and gasket
Includes adjustable flapper for efficient, powerful flushes every time
Easy to install
Show more
8.6

Very Good

Show more