Advertising Disclosure
10 Best filament dryer 4 spool in Canada
Best Choice01CrealityCreality SpacePi X4 Filament Dryer Box, 3D Printer 4 Spools Filaments Storage Box, Dual Heating Chambers, 200W PTC Heats Up to 85°C, Fast Drying & Moisture-Free Storage for PLA, PETG, TPU, ABS
15% OffMain highlights- 【Wide Compatibility】Large size for 1kg/2kg spools. Works perfectly with all standard filament diameters 1.75/2.85mm. SpacePi X4 supports drying common filaments like PLA, PETG, ABS, ASA, PET, PA, PAHT, PC, PVA, PP, TPU, and their variations.
- 【Humanized Intelligent Design】Active Silent-Once the target temperature is reached, the drying fan speed automatically reduces, operating quietly without disturbing your peace. You will know when drying is complete in advance through the "beep" sound at the end of the drying. You can choose to turn the supplementary light on manually or set it to automatic mode. In automatic mode, the light will turn on automatically when drying starts and turn off when drying ends.
- 【Dual Independent Heating Chambers】Each chamber is equipped with an independent PTC heater, allowing simultaneous drying of two filament types at different temperatures in one machine. Works perfectly with filament diameters of 1.75mm and 2.85mm. We highly recommend using the Creality Space Pi filament dryer in advance for drying in high-speed printing scenarios.
- 【Dual 200W PTC Heating】Creality Space Pi X4 Filament Dryer has 200W + 200W PTC heaters, allowing temperatures to reach up to 85℃, which ensures uniform drying, durability, energy efficiency. Paired with insulated chambers, significantly improves heating efficiency. This ensures continuous and effective drying of engineering filaments such as PA, PAHT, PC.
- 【4 Spools Dry and Print at Once】Creality Space Pi X4 Filament Dryer supports 4 spools dry and print simultaneously for maximum efficiency. With eight filament holes and PTFE tubing, this innovative dryer meets the need for drying multiple filaments and allows printing on four printers at the same time
9.9Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Creality
Creality Space Pi X4L Filament Dryer Box, 3D Printer 4 Spools Filament Storage Box, Max 85°C Temperature, Dual Independent Heating Chambers & Fan, Rapid Drying for PLA,PETG,TPU,ABS,PET,PC,ASA,PA,PAHT
Main highlights- 【Spacious & Organized Storage】Holds 4 standard 1kg spools or 2 large 2kg spools – the ultimate Creality SpacePi X4L filament dryer for high-volume users. Universal compatibility with 1.75mm/2.85mm filaments
- 【Protect Your Filament Investment】Extends filament shelf life, reduces waste%, and ensures consistent high-quality prints
- 【Precise Temperature Control】Industry-first drying scene touch UI on this Creality dryer. Customize temps 50-60°C for PLA/PETG/TPU ect. via real-time display. 70-75°C capability unlocks advanced filaments (ABS/PET/PC/ASA/PA/PAHT)
- 【Fast & Efficient Drying】Dual independent 200W heating chambers (75°C max) remove moisture 30% faster than single-chamber dryers. Eliminates bubbling, stringing, and layer adhesion issues – achieve print-ready filament in hours, not days
- 【Dual Functionality】Dryer + Storage: Beyond a standard filament dryer box: Actively maintains humidity during printing pauses. Silicone-sealed enclosure prevents moisture re-absorption 24/7. Monitor spools via illuminated window without breaking humidity control
9.8Exceptional
Show more
Value for Money03SovolSovol SH03 Filament Dryer 4 Spools, Dry Box with 85℃ Max Temp, Sealed Filament Storage Box with Auto Dehumiditification, Dual Independent Heating Chambers for PLA PETG ABS TPU ASA PC PA 1.75/2.85mm
10% OffMain highlights- [One Key Set for Each Type of Filaments] - Sovol SH03 has one-key temperature setting for 10 different types of 3D Printing filaments, including PLA, TPU, PETG, ABS, ASA, PVA, PET, PC, PA, PP. We have set default drying temperature and time for each type of filaments in advance. Just press one key to choose the filament type and the drying box will start working as you expected immediately.
- No More Moisture in the Chamber: When SH03 is working and the temperature inside the chamber reaches the preset target temperature, the moisture vent will open. Auto Dehumidification System helps moisture in the chamber quickly discharged and resolves the pain points of most filament drying boxes on the market for users
- Dual Independent Heating Chambers: Sovol SH03 dry box comes with 2 chambers controlled independently. You can only use one of them or make both 2 chambers working at the same time to heat up to different temperature for different type of filaments. Since SH03 can be sealed to store dried filaments without power, you can also make one chamber drying while another one for storage without power
- 4 Spools Filament Dryer Box: Each Sovol SH03 filament dryer is equipped with 4 filament holes which allow PTFE pipes through. The newly designed filament hole position is convenient for 3D printers with different extruder positions on the market. Large capacity of drying 4 spools of 1KG filament at the same time meets the needs of users to print with multicolor and use 4 printers at the same time, saving space and making the work area tidier
- 200W+200W PTC Fast Heater: Sovol SH03 equips with dual 200W PTC heater which can heat up to 85°C max temp faster and are more energy-efficient. SH03 dryer box can reach 50°C within 4 mins and reach 70°C within 12 mins. The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving your 3D printing results
9.7Exceptional
Show more
- 04SUNLU
SUNLU Filament Dryer S4, 4 Spools Capacity, 3 Circulation Fans, 350W PTC Heater Power Saving Storage Mode 70℃ Max Temperature, Nylon TPU PLA PETG ABS 3D Printer Filament Dryer Box, FilaDryer S4 White
Main highlights- 4 Spool Capacity: SUNLU filament dryer S4 can dry up to four 1kg 3D printer filaments, enhancing drying efficiency and printing quality when drying while printing.
9.6Exceptional
Show more
- 05SUNLU
SUNLU Official 3D Printer Filament Dryer S4, 4 Spools Capacity, 3 Circulation Fans, 350W PTC Heater, 70℃ Max Temperature, Power Saving Storage Mode, Nylon TPU PLA PETG ABS Filament Dryer Box, Black
Main highlights- Temperature Adjustment and Timer: Temperature setting range is 35-70°C, timer setting range is 0-99 hours. Users can adjust parameters to suit filament conditions.
- SUNLU S4 Packing List: FilaDryer S4 *1, Power Cable *1, 8cm PTFE Tube *4, 100cm PTFE Tube *2, User Guide *1, Pieces of Clips, Pieces of Silicone Plugs.
- SUNLU Main Products: SUNLU provides a diverse selection of premium 3D printing solutions, including 3D printer filament, filament dryers, FDM 3D printers, 3D printer resin, LCD 3D printers, resin curing boxes, 3D pens, filament refills and various accessories, ensuring all you need for a rewarding 3D printing experience.
- High Compatibility: SUNLU filament dryer S4 supports a wide range of materials including PLA, PLA Plus, PLA Meta, PETG, ABS, TPU, PA, PC, Nylon, etc., compatible with 1.75mm, 2.85mm, and 3.00mm.
- Filament Dryer S4 Size: SUNLU filament dryer S4 is notably large in size. External size-460(L)*220(W)*310(H)mm, internal size-450(L)*175(W)*207(H)mm, net weight-4KG.
- DIY More Possibilities: SUNLU filament dryer S4 can be modified to dry 3kg large rolls of filament or function as a shoe dryer. We've created a video to demonstrate the process. Feel free to check out more details!
- 8 Filament Exit Holes: SUNLU filament dryer S4 features eight filament outlets, ideal for multiple printers and various filament loading angles, smoother loading and printing.
- 4 Spool Capacity: SUNLU filament dryer S4 can dry up to four 1kg 3D printer filaments, enhancing drying efficiency and printing quality when drying while printing.
- 350W PTC Heater: SUNLU filament dryer S4 is equipped with a 350W PTC heater, offering safety and higher heating efficiency (50% higher than the FilaDryer S2).
- 3 Circulation Fans: Three high-quality fans circulate air inside, ensuring consistent temperature across the entire area for more even drying, 360° surround heating.
9.5Excellent
Show more
- 06SUNLU
SUNLU AMS Heater for Bambu Lab AMS Gen 1 Upgrade, 4-Spool Dry & Print Simultaneously, Easy to Install, Heats up to 70°C in 20 Min, PTC Heater Filament Dryer (Black)
15% OffMain highlights- ⑩【SUNLU Main 3D Products】- SUNLU offers a variety of high-quality 3D printing products, including 3D printer filament, engineering filament,filament dryer, filament connector, 3D printer resin, resin curing box, and other accessories.
- ⑨【SUNLU AMS Heater Packing List】- AMS Heater*1 (not included AMS), Hinges*4 , Hex Screws*8 , Hex Screwdriver*1, Power Cable*1 , Instruction Manual*1.
- ⑧【Product Dimensions】- Measures 14.3 x 10.9 x 5.2 inches (363 x 278 x 131 mm), designed to fit seamlessly into your AMS setup.
- ⑦【Triple Safety Protection】- Advanced overheating protection with auto-shutoff and temperature recovery. Heat is directed away from critical AMS components for worry-free operation.
- ⑥【Humidity Control】- Default heating temperature is 55°C, with adjustable temperature and humidity settings. Heating activates automatically when humidity reaches 50% and turns off when it drops to 20%.
- ⑤【High Compatibility】- Supports all AMS Gen 1 functions. This product is the AMS Heater and does not include the Automatic Material System (AMS).
- ④【All Round Even Heating】- Dual-Airflow system evenly distributes heat to the AMS's 4 spools, preventing localized overheating of the filament, reducing the risk of warping.
- ③【Easy & Safe Installation】- 3 steps installation upgrade your AMS, only replaces the original lid, making the installation process completely non-destructive.
- ②【20-Minute Fast Heat】- AMS Heater reaches 70°C(158°F) in just 20 minutes, quickly drying most common 3D printer filaments, such as PLA PETG ABS TPU PA filaments.
- ①【Simultaneous Print& Dry】- SUNLU AMS heater can be used with Bambu Lab AMS (Gen 1) to achieve simultaneous printing and drying of filament.
9.4Excellent
Show more
- 07Sovol
Sovol Filament Dryer 2025, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm PLA PETG TPU ABS
15% OffMain highlights- 【You Must Know...】 Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better.If the screen displays two errors, E0 and E1, please open the drying box and check all the cable sockets on the motherboard to see if they are damaged or loose. If there is any problem, please feel free to let us know. We will send replacement for you
- 【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament
- 【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect
- 【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation
- 【Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to let us know. Our technical support team will provide service as soon as we can
- Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality
9.1Excellent
Show more
- 08Sovol
Sovol Filament Dryer 2025, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm PLA PETG TPU ABS
15% OffMain highlights- 【You Must Know...】 Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better.If the screen displays two errors, E0 and E1, please open the drying box and check all the cable sockets on the motherboard to see if they are damaged or loose. If there is any problem, please feel free to let us know. We will send replacement for you
- 【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament
- 【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect
- 【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation
- 【Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to let us know. Our technical support team will provide service as soon as we can
- Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality
8.8Very Good
Show more
- 09Sovol
Sovol SH02 Filament Dryer Fast up to 70°, Filament Dryer Box Sealed Storage 3D Printer Spool Holder Filament Dehydrator with Touch Screen and PTC Heater, Compatible with PLA PETG TPU ABS 1.75/2.85mm
14% OffMain highlights- [One Key Set for Each Type of Filaments] - Sovol SH02 has one-key temperature setting for 9 different types of 3D Printing filaments, including PLA, TPU, PETG, ABS, ASA, PVA, PC, PA, PP. We have set default drying temperature and time for each type of filaments in advance. Just press one key to choose the filament type and the drying box will start working as you expected immediately.
- [One Key Set for Each Type of Filaments] - Sovol SH02 has one-key temperature setting for 9 different types of 3D Printing filaments, including PLA, TPU, PETG, ABS, ASA, PVA, PC, PA, PP. We have set default drying temperature and time for each type of filaments in advance. Just press one key to choose the filament type and the drying box will start working as you expected immediately.
- [Dual Spool Filament Dryer Box] - Each Sovol SH02 filament dryer is equipped with 2 filament holes which allow PTFE pipes through. The newly designed filament hole position is convenient for 3D printers with different extruder positions on the market. Large capacity of drying 2 rolls of 1KG filament at the same time meets the needs of users to dry a wide range of filaments and two printers at the same time, saving space and making the work area tidier.
- [Better Sealing than SH01] - We changed the sealing design of SH02 filament storage box and used thicker sealing materials with stronger sealing performance. Even when it is not powered on, SH02 protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dry box to improve drying efficience & quality.
- [150W PTC Fast Heater]- Different from Sovol SH01, SH02 comes with 150W PTC heater which can heat up faster and are more energy-efficient. SH02 dryer box can reach 50°C within 7 mins and reach 70°C within 25 mins. Also you can set 40-70°C as you wish. The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving your 3D printing results.
8.7Very Good
Show more
- 10Sovol
Sovol SH02 Filament Dryer Fast up to 70°, Filament Dryer Box Sealed Storage 3D Printer Spool Holder Filament Dehydrator with Touch Screen and PTC Heater, Compatible with PLA PETG TPU ABS 1.75/2.85mm
14% OffMain highlights- [One Key Set for Each Type of Filaments] - Sovol SH02 has one-key temperature setting for 9 different types of 3D Printing filaments, including PLA, TPU, PETG, ABS, ASA, PVA, PC, PA, PP. We have set default drying temperature and time for each type of filaments in advance. Just press one key to choose the filament type and the drying box will start working as you expected immediately.
- [One Key Set for Each Type of Filaments] - Sovol SH02 has one-key temperature setting for 9 different types of 3D Printing filaments, including PLA, TPU, PETG, ABS, ASA, PVA, PC, PA, PP. We have set default drying temperature and time for each type of filaments in advance. Just press one key to choose the filament type and the drying box will start working as you expected immediately.
- [Dual Spool Filament Dryer Box] - Each Sovol SH02 filament dryer is equipped with 2 filament holes which allow PTFE pipes through. The newly designed filament hole position is convenient for 3D printers with different extruder positions on the market. Large capacity of drying 2 rolls of 1KG filament at the same time meets the needs of users to dry a wide range of filaments and two printers at the same time, saving space and making the work area tidier.
- [Better Sealing than SH01] - We changed the sealing design of SH02 filament storage box and used thicker sealing materials with stronger sealing performance. Even when it is not powered on, SH02 protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dry box to improve drying efficience & quality.
- [150W PTC Fast Heater]- Different from Sovol SH01, SH02 comes with 150W PTC heater which can heat up faster and are more energy-efficient. SH02 dryer box can reach 50°C within 7 mins and reach 70°C within 25 mins. Also you can set 40-70°C as you wish. The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving your 3D printing results.
8.6Very Good
Show more
