Advertising Disclosure
10 Best engine heaters in Canada
Best Choice01AiikerHeater Diesel Coolant Circulation Heater 12V 5KW for Trucks, Cars, RV Trailers, Motorhomes and More Heater Engine
10% OffMain highlights- 【Points for Attention】 It is necessary to prevent the surrounding objects of the heater from being affected or even damaged by high temperatures. When installing the oil pump, always pay attention to the nozzle tilting upwards, and The best installation angle is between 15.1° and 35°; Can be between 35° and 90°; It must not be between 0°and 15°. It involves extracting a small amount of fuel from the original vehicle fuel tank. New energy vehicles require an external tank.
- 【No need to plug in and remote start】The coolant heater allows the engine to reach operating temperature faster, making it easy to start the engine in extremely cold conditions. No need to plug in electricity, using the vehicle's own fuel to generate heat. There are two ways to start the coolant heater, in the car or remotely. The car heater can be started remotely by remote control to warm up the engine before you arrive at the site.
- 【Low Cost Vehicle Use】 Due to low temperatures, engines of various vehicles are difficult to start in the cold winter months. Even if the engine can be started, such forced starting increases engine wear and shortens the engine life. By preheating the engine coolant in advance, you can avoid engine wear caused by cold start and excessive engine idling, reduce maintenance costs, reduce the extra fuel consumption of cold running, and make your engine durable.
- 【Excellent Quality and High Performance】The product is designed and manufactured using German technology, the coolant heater control chip imported from Europe makes the heater 35% more thermally efficient than other common heaters, the Japanese imported point piston provides high thermal value and durability, high heat output (1500-6000 watts) and low fuel consumption (＜0.3L/hr). The coolant heater combustion chamber is made of 2520 stainless steel, so it can withstand temperatures above 1300°C.
- 【Easy Installation】Suitable for 12v various diesel and gasoline fuel vehicles, all installation kits such as fuel pumps, water lines, fuel lines, hose clamps are included. The compact size of the haokey coolant heater makes it easy to install in a variety of locations. With its exhaust, combustion air and diesel intake ports located just below the unit and a reasonably compact design, you can easily place the HE-1 engine heater in the engine compartment.
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02ZJHESXV
5000W Water Heating Parking Heater Water Cycle Car Engine Preheater with Remote Control Diesel Gasoline Universal for Trucks, Vans, RV, Trailers,12v
Main highlights- The water-heated parking heater is designed with an independent vehicle-mounted preheating device, eliminating the need to replace the original vehicle circuit and oil circuit.
- The controller adopts microcontroller automatic program control, automatic fault retrieval, and low voltage protection. The operation is simple and convenient.
- Suitable for all types of automobiles, agricultural machinery and vehicles, ships, yachts, RVs and other vehicles.
- Material metal and plastic; thermal power output 5 kilowatts; fuel consumption 0.46 liters/hour; fuel diesel, gasoline.
- In the cold winter, you can preheat the engine and cab before getting in the car to drive away the cold. Improve the driving environment.
9.7Exceptional
Show more
- 03
Kat'sKat's 13150 1500 Watt Aluminum Circulating Tank Heater (13150X)
Main highlights- Uses versatile strap type mounting
- Thermostatically controlled from 135 to 175 degrees
- Requires moderate mechanical ability to install
- Fit type: Vehicle Specific
- Die cast aluminum design for corrosion and impact resistance
- 1500 Watt
9.6Exceptional
Show more
Value for Money04VVKBVVKB Titan-P3 Car Engine Heater 110V 1500W with Thermostats & Built-in Circulation Pump
Main highlights- With two thermostats
- With built-in water pump
- Wide range of applications
- Vibration resistant
- The VVKB heater has 12-month after-sales guarantee.VVKB has a good after-sales service team, any of your problems, can be 10 hours to get our reply.
- Multiple power options available
- Aluminum die-cast electric heaters with extra long service life.
- All accessories are replaceable
9.5Excellent
Show more
- 05Thunder Parts
***Original*** HOTSTART Engine Heater TPS151GT8-000 | Coolant Preheater | 1500 watts 120V 12.5A | ON: 80°F (27°C) – Off 100°F (38°C) |1 Year Warranty!
Main highlights- Volts: 120v - kW: 1.5 - AMPS: 12.5 - 60Hz
- Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
- Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
- Heating Fluid: Engine Coolant, Water, other No pump needed (thermosiphon principle)
- Engine Displacement: 350 – 500 CID (5.7–8.2 L)
9.4Excellent
Show more
- 06CANADIAN POLAR PAD
CANADIAN POLAR PAD (CSA) CP512-250 Watts Oil Pan Heater(Engine/Transmission/Generator/Hydraulic Reservoirs) 3.5" x 5.125" (8.89cm x 13.0175cm) 120 Volts
9.2Excellent
Show more
- 07Zerostart
Zerostart 2204037 Circulation Heater, 5/8" (15.9 mm) Diameter Inlet/Outlet | CSA Approved | 120 Volts | 1500 Watts
Main highlights- Vertical installation only
- Thermostatically controlled: opens at 190 degree F, closes at 151 degree F
- Rugged cast aluminum construction is corrosion and impact resistant
- Dimensions: 2-3/4" X 8-1/2" (7cm x 21. 6cm)
- Copper heating element provides excellent heat transfer
9.1Excellent
Show more
- 08Littryee
1500W Car Engine Heater | Truck Coolant Heater Parking Heater with Overheating Protection | Car Preheater for All Cars Below 1.8L Exhaust Littryee
13% OffMain highlights- ◫Reduced Fu-el Consumption: the pre-heater quickly helps the engine coolant to reach the working temperature the vehicle will not stall for a long time and at the same time reduces the consumption of dyes.
- ◫Overheating System: The automatic overheating system of the preheater will automatically cut off the power supply and turn off the equipment when the heater parts are overheated to protect your safety.
- ◫Note: After the preheater is installed pay attention to the air in the exhaust pipe to avoid the problem of dry burning due to the internal air preheater which may damage the preheater.
- ◫High Quality: The circulating water pump uses high-quality copper wire which can provide good performance and service life and there will be no problems in long-term use.
- ◫Good Cooling Effect: This heater has a built-in electric centrifugal pump with forced circulation of coolant which can quickly warm up and has a good effect.
9.0Excellent
Show more
- 09
Zerostart
Zerostart 3308003 Series 8000 Light Duty Circulation Heater, 5/8" (15.9 mm) Diameter Inlet/Outlet | CSA Approved | 120 Volts | 1500 Watts
Main highlights- Top-side location of power cord connection provides damage protection from road debris and chemicals
- Temperature sensing safety thermostat provides overheat protection 147ËšF (64ËšC) ON - 185ËšF (85ËšC) OFF
- Integral check valve supports extensive range of plumbing configurations, detachable power cord enhances ease of installation
- Convenient design and universal mounting strap
- CSA approved; volts: 120, watts: 1, 500; plug type: 120 volt, 15 amp; inlet/outlet size: 5/8†(16mm)
8.9Very Good
Show more
- 10YWBL-WH
1000W Coolant Heater Engine Block Heater 120V Self Circulating Water Jacket with Thermostat Aluminum Alloy for Generator Preheating
Main highlights- PREMIUM MATERIAL: The coolant heater is made of aluminum alloy and iron alloy, with less vibration, impact resistance, greatly extended service life.
- METAL STRUCTURE: The heater is made of aluminum alloy and iron alloy, with less vibration, impact resistance, greatly extended service life.
- High Efficiency: The 1000W heater is mainly used for preheating, with a constant temperature point of 50℃, which greatly reduces heat loss, improves operating efficiency and has strong practicality.
- HIGH EFFICIENCY: The constant temperature point is 50℃, which greatly reduces the heat loss, improves the efficiency, and has strong practicability.
- HIGH EFFICIENCY: The constant temperature point is 50℃, which greatly reduces the heat loss, improves the efficiency, and has strong practicability.
8.8Very Good
Show more
