Advertising Disclosure
5 Best dmm under 50 in Canada
Best Choice01AmprobeAmprobe 37XR-A TRMS Digital Multimeter with Component Logic Test
Main highlights- True RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform
- Separate door for easy battery and fuse access
- Reports logic state of transistor-to-transistor (TTL) or complementary metal-oxide-semiconductor (CMOS) digital circuits
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category II installations up to 1,000V, and category III installations up to 600V
- Maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings, and the average function displays the average of the recorded maximum or minimum values
- Magne-Grip Holster with magnetic hanging strap
- Display Update Rate: 2/sec, nominal
- Digital multimeter measures alternating current (AC) and direct current (DC) to 10 amp, AC voltage to 750 volts (V), DC voltage to 1,000V, resistance to 40 megaohms, capacitance to 400 microfarads, frequency to 10 megahertz (MHz), inductance to 40 henrys (H), duty cycles to 90%, and power to 50 decibels relative to miliwatts (dBm)
- Autoranging; Display: 4-3/4 digit LCD, 10,000 counts with 41-segment analog bar graph
- 10 Amps ac/dc, fully safety fused
9.9Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money02
AmprobeAmprobe 35XP-A Digital Multimeter with Non-Contact Voltage Detection and Temperature
Main highlights- Storage Temperature -20 °C to 60 °C, 0 to 80 % R.H. with battery removed from meter
- Resistance to 40 MΩ
- Polarity Automatic, positive implied, negative polarity indication
- Operating Environment 0 °C to 50 °C at <70 % R.H.
- Non-contact voltage detector senses AC voltage without making contact with the circuit
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category I installations up to 1,000V, category II installations up to 600V, and category III installations up to 300V
- K-type thermocouple probe measures temperature
- Digital multimeter measures alternating current (AC) and direct current (DC) to 2 amp, AC voltage to 750 volts (V), DC voltage to 1,000V, resistance to 40 megaohms, capacitance to 4 millifarads, and frequency to 1 megahertz (MHZ)
- Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform
- 0.1 μA resolution for flame sensor testing
9.7Exceptional
Show more
- 03Generic
CESS-222 Meter Test Lead Extension Right Angle Male to Female Connector 4mm Banana Plug to Jack Heavy Duty Silicone Wires Multimeter Leads Probes Adapter 12AWG, 2 Pairs
Main highlights- Right-Angle Male to Straight Female Design – Enhances versatility, fitting most standard multimeters and DMMs.
- Heavy Duty Silicone Wires – 12AWG silicone rubber cables with 680-strand count, super soft and flexible even under extreme conditions.
- Durable and Safe – Heat-resistant, highly flexible, and insulated to prevent wear and tear from daily use.
- Color-Coded for Easy Identification – Black and red cables make it simple to identify positive and negative connections.
- 4mm Insulated Safety Banana Plugs – Ensure secure and safe connections with standard multimeter and DMM inputs.
9.4Excellent
Show more
- 04Amprobe
Amprobe DM73C Pen Probe Digital Multimeter with Built-in Test Probe
Free ShippingMain highlights- UL 3111-1 listed
- Resistance to 34 MΩ
- Meter measures 7.8 x 1.1 x 1.4 inches (H x W x D) and can be carried in a pocket
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category II installations up to 600V and category III installations up to 300V
- Liquid crystal display (LCD) shows readings both in digits and on a bar graph
- Improved dc basic accuracy 0.5%
- Digital multimeter with built-in test probe measures alternating current (AC) voltage and direct current (DC) voltage to 600 volts (V) and resistance to 34 megaohms
- Cat III 300 V, Cat II 600 V
- Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform
- 3400-count digital display plus analog bargraph
9.1Excellent
Show more
- 05TECPEL
Tecpel AC/DC Current Transmitter 600A CA-600
Main highlights- 600A AC / DC mA Current Clamp transmitter CA-600 Tecpel
9.0Excellent
Show more
