10 Best digital gauges in Canada

Advertising Disclosure

Last Updated - 2024/05/02

Best Choice
01

Winters

Show more

On Amazon

Digital Pressure Gauge (Range: 0-10152 PSI) (0 bar to 700 bar) for Test Measurement, General Purpose Installations Alongwith Calibration Certificate with Traceability Model: Winters DPG Series
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

Supply Scope: 1unit of Winters DPG, Instruction manual & Calibration Certificate | Applications: For Commercial and Industrial Applications.
Power Mode Auto or manual shut-off | Display Digits 4 digits to 5,000 psi | Pressure Unit Selection psi, bar, kg/cm², MPa
Operation Mode: Continuous pressue reading | Response Time : ±3 Hz display refresh rate | Proof / Burst Pressure : 200% / 300% FS | Operating Temperature : 14°F to 122°F / -10°C to 50°C | Storage Temperature: -4°F to 167°F / -20°C to 75°C | Accuracy: ±0.5%
Measuring Range: 0 - 10000 PSI | Case Size 2.5" (63mm) | Case Material ABS (IP64) | Rubber Boot Silicone rubber (IP65)
LCD Display 2" x 3/4" (48mm x 16mm) | Connection 1/4" NPT 304SS | Sensor 316L welded, Piezo | Operation Life 1 million cycles | Power Supply 2 x AAA battery (1.5V) | Battery Life 2yrs (auto shut-off mode)

CA$255.00
02

CMTOOL

Show more

On Amazon

Digital Manifold Gauge Set HVAC Dual-Channel Temp Sensor HVAC Tools for 89 Kind of Refrigerant Digital AC Gauges Vacuum Pressure&Temp Test Digital HVAC Gauges with Hoses Digital Refrigeration Gauge
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

8.【How to Detect Whether the Temperature is Accurate】There is a simple method: take out the black wire of the temperature clamp, and then put the temperature clamp into boiling water. If the displayed temperature is 100 ℃ ± 3%, it is normal.
7.【Note】The digital HVAC gauges will read random numbers when it is powered on. Correct steps: 1. Turn on, then close the two valves, press the "ZERO" key to clear the reading. 2. Then connect the three-color hoses, then open the valve, and use it normally. Please make sure that the refrigerant hose is properly connected. Poor connection may cause refrigerant leakage. The maximum working pressure of the standard hose is 600 PSI ( 4.13 Mpa, 41.3 bar). The ultimate pressure is 3000 PSI.
6.【Refrigerant Gauges with Visual Window and LCD Display】The charging status of refrigerant can be directly observed through the refrigeration gauges window, which makes the operation more convenient. 7.5CM×4CM display screen, support LCD backlight, convenient lighting operation, the displayed data is clearer and easier to read.
5.【HVAC Manifold Gauge Set for Pressure Leak Test】The HVAC pressure gauge calculates the pressure difference between the initial test pressure and the second test pressure to determine if the refrigerant is leaking. Pressure leak measurement, leak time and speed record. Using a digital manifold gauge set can make your job easier.
4.【Durable and Multifunctional HVAC Manifold Gauge Set】The HVAC tools are designed with high-strength engineering plastics and flexible non-slip silicone. The whole HVAC pressure gauge is solid and comfortable to hold. The exquisite design of the foldable hook ensures that the digital ac gauge is in a safe position during the measurement of air conditioning tools & equipment. Long-life valve switch, 1/4 inch standard interface design to ensure the durability and versatility of the instrument.
3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high data and stability. The a/c manifold gauge set built-in 89 kinds of refrigerant pressure-evaporation temperature database, also calculate the subcooling superheat, to facilitate the direct reading of operating process data. Also, it tests the percentage of vacuum measurement.
2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value.
1.【Manifold Gauge Set for Refrigeration Equipment】The refrigeration gauges are dedicated to installing, testing, and maintaining refrigeration equipment such as air conditioners, refrigerators, and cold storage. The 2 temperature clamps in the manifold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter.

CA$199.99
03

MEASUREMAN

Show more

On Amazon

MEASUREMAN 3-1/8" Dial Size, Digital Pressure Gauge, 0-10000psi/bar/Mpa, 1/4"NPT Lower Mount, 0.25% Accuracy
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

For hydraulic, oil pressure, water pressure, air pressure measuring, for media which is not corrosive to stainless steel wetted parts
Dial size: 3-1/8", protective boot, bright backlight, 0.25%
5 digit display, 4 units, 10000psi, 700bar, 70Mpa, 70000kpa, 125% over load
316 Stainless steel connection, 1/4"NPT male
"Batteries status display, pressure unit interchangeable "

CA$138.41
04

ETENWOLF

Show more

On Amazon

ETENWOLF Digital Tire Pressure Gauge 3-200 PSI, Industrial Tire Gauge Calibrated to ANSI B40.7 Grade 2A(±0.5%), Replaceable AAA Batteries with Presta Valve Adaptor (Vivid Orange), T300
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

Stylish Italian industrial design with multiple color options for a fashionable look, a good gift as car accessories
STURDY AND DURABLE: When a car runs over ETENWOLF's tire pressure gauge, it can't be damaged and still works normally
REPLACEABLE AAA BATTERIES: Batteries are easy to replace and helps to extend the tire pressure gauge’s life span, with LED light to illuminate dark areas for easy tire pressure reading
Presta tire pressure gauge with a presta valve adapter, making it suitable for various tire types
PSI gauge especially suitable for pickups, RVs and heavy-duty vehicles
PROCESS LEVEL ACCURACY: Each ETENWOLF’s digital tire pressure gauge is calibrated manually to ANSI B40.7 Grade 2A((±1 PSI)
PRESSURE RANGE 3-200PSI : ETENWOLF’s digital tire pressure gauge can measure pressure of all types of vehicles
Auto shut-off after 30 seconds to save battery and ensure prolonged usage of the pressure gauge
ACCURACY IN EXTREME WEATHER: Built-in AI chip with thermal compensation inside, ETENWOLF’s tire gauge works normally even in extreme cold or hot weather(-4°F-130°F/-20°C-54°C)
ACCURACY IN EXTREME PRESSURE RANGE: Whether tire pressure is below 12 PSI or above 140 PSI, ETENWOLF’s digital tire gauge is accurate as well

CA$17.99
Best Value
05

FineSource
46% Off

Show more

On Amazon

FineSource Electronic Digital Caliper Inch/Metric Conversion 0-6 Inch/150 mm Carbon Fiber Gauge Micrometer Extra Large LCD Screen Auto Off Featured Measuring Tool (Black)
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【WIDELY APPLICATION】This digital caliper is sutable for home and DIY, You can use the micrometer to measure the length, width, depth, steps, inner & outer diameter, etc. It must be a great choices for machinists, woodworders, Jewelers and craft lovers.
【PRODUCT USAGE】Automatically open the digital caliper when sliding the guide rail, automatically close after 5 minutes, or manually close it, with a reset function, two length units of inches and millimeters, can measure length and depth, and the operation is very simple .
【PRECISE MEASURMENT】Measurement Range: 0 - 6" and 0 - 150mm; This caliper measures inside, outside, depth, and step with two sets of jaws and a probe. Easy to toggle between inches and mm with the push of a button.
【DESIGN】This lightweight caliper is adopts sturdy carbon fiber composite, anti-rust and no scrapes. Safe to put in your pocket and carry anywhere. The large LED screen is easy to ready and the four measuring capabilities make it a must have around any home or shop.
【AFTER SERVICE】We supply 100% satisfaction service ,If you have any issues with our electronic digital Caliper, simply contact customer service for replacement.

CA$15.99 CA$29.99 46% Off
06

Walfront

Show more

On Amazon

3.15 Stainless Steel Digital Hydraulic Pressure Gauge, 10000PSI 400BAR 0-40Mpa with G1/4 Connector Hydraulic Pressure Gauge Tester
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

Widely Applications: This PSI Hydraulic Pressure Gauge has widely uses during daily life,and it is mainly used for pneumatic tools, air compressed system, agricultural machinery, industrial equipment, power plant, water companies, medical equipment, gas processing equipment, water treatment equipment, environmental protection equipment such as pressure measurement
Premium Quality Material: This Digital Hydraulic Pressure Gauge adopts with imported pressure sensor and electronic components to ensure a high precision, and it adopts with 304 stainless steel gauge tail, which is corrosion resistance and anti-rust to provide a good looking and long time use
Multifunction for Better Use: This Digital Hydraulic Gauge has a button design to offer a simpler operation for you. The back light delay for 10 seconds and automatic shutdown are more power saving. The MPA/PSI/ Kgf/cm2 design ensures multiple units can be switched display
LCD Display Design: This Hydraulic Pressure Gauge designed with a clear LCD display to provide a clear reading, and the blue back light source makes it clearer for use at night, and it also provide a more comfortable feeling for your eyes
Battery Power Supply: This Hydraulic Gauge has a battery power supply design, which offers a freely use, no limited by power supply, more convenient to use

CA$120.54
07

Xetron

Show more

On Amazon

Xetron HVAC Manifold Gauge Digital AC Manifold Gauge for Refriegration Diagnostic, Pressure Gauge with OTA Remote Upgrade, 1/4"SAE 2-Way
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【Trouble-free Warranty by reaching us】Zero risk, one year warranty and 24/7 customer service.
【OTA(over-the-air update) for Remote Firmware Upgrade】Keep your manifold up-to-date. DMG-10X digital manifold, more units than mechanical manifold, Available Units of pressure and temperature : [psi, kPa, Mpa, bar, inHg], [℉/℃]. 【Built-in Temperature Compensation】Eliminating the mistake of temp. change affecting pressure.
【Advanced Thick Film Ceramics MEMS Sensor】Compared with Mechanical Shrapnel Structure easily damaged by outside force, MEMS Sensor can feel pressure reliably and stably. Aluminum valve body reinforcement on the bottom, Anti-collision and fall resistance.
【Add any refrigerants certificated by NIST Standard】Private custom for your job, DIY yourown 18 kinds, from 141+ refrigerants (continuously updated through APP), including R11 R12 R13 R22 R290 R32 R134a R404A R410A R407C R408A R409A R458A R448A R449A R500 R502 R600 etc. ASHRAE 34 standard classifies refrigerant safety based on toxicity and flammability, helping you ahead of time do adequate safety protection measures.
【APP Real-time Data View+ Intelligent Analysis】[Pressure Temperature Measurement Mode] is free, according to your actual working needs, set upper and lower limit of High/Low pressure alarm. You can see these data on APP homepage: Minimum, Maximum, Average Pressure, EV, CO. 【Enter High/Low Temp. auto calculating Subcool(SC) and Superheat(SH)】. 【FREE 7-DAY TRIAL of all Functions: Hold Pressure Test, Offline Data Logging, Vacuum Test】More details and discount bundle please see the picture.

CA$138.00
08

GlowShift

Show more

On Amazon

GlowShift 10 Color Digital 30 PSI Boost/Vacuum Gauge Kit - Includes Electronic Pressure Sensor - Multi-Color LED Display - Tinted Lens - for Car & Truck - 2-1/16" (52mm)
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

Quick-Glance & Easy to Read Digital Display - 10 Solid Color Modes & 2 Color Cycle Modes - Self-Calibration at Startup Ensures that the Gauge is Performing Optimally
Includes Electronic Pressure Sensor, 9' Sensor Harness, 2' Power Harness, 6' Clear Vacuum Line, 1/8" T-Fitting, Air Filter, Gauge Visor, Mounting Hardware & Installation Instructions
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support
GlowShift 10 Color Digital Series 30 PSI Boost/Vacuum Gauge is Designed to Monitor Boost Pressure & Vacuum Compression Levels of Your Car's Turbo or Supercharged Engine
Boost Readings from 0 to 45 PSI & Vacuum Readings from -30 to 0 inHg - 2-1/16" (52mm) Gauge with Digital Display & Tinted Lens

CA$128.31
09

Mecurate

Show more

On Amazon

Mecurate Digital Angle Gauge and Protractor, Precise Measurement Digital Angle Finder Tool with LCD and Backlight for Woodworking and Building…
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement.
【Multi-function】: The angle gauge is portable and convenient, especially useful for completing work on ladders, roofs or other dangerous locations, it can be used in woodworking, welding, fabrication, construction, machinery, home renovation, automobile etc.
【Magnetic Base】: Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces
【Convenient and comfortable design】: Easily read, large LCD Display and Automatic backlight, greatly improve visibility in poor or dim working conditions.
【Accuracy】: Mecurate digital angle gauge ensures the accuracy of data up to ±0.1° (0° & 90°) and ±0.2° at other angles, the resolution is accurate to 0.05°.

CA$27.99
10

ALLmeter

Show more

On Amazon

ALLmeter Digital Table Saw Gauge with 0~1 Inch Dial Indicator and 3.2 Inch Long Anodized Aluminum Bar for Work Shop Machinery, Table Saws, and Bandsaws
8.3

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

Precise measurements: The ALLmeter Digital Table Saw Gauge provides accurate and consistent measurements up to 1 inch with a resolution of 0.001 inch. It boasts high processing precision, reducing the looseness of the gap after the aluminum alloy strip is fixed, ensuring accuracy in your measurements with a processing precision of 0.02mm.PLS note:Not fit on Shopsmith Mark V model 510 table
Package includes:2 x Anodized Aluminum Bar;1 x Digital Dial Indicator1 x Digital dial indicator ear back cover;2 x plum blossom nut;2 x spring plunger;2 x Hexagon socket nut;2 x Hexagon socket wrench;4 x Plastic gasket;2 x metal shop
Easy to install and use: Installing the ALLmeter Digital Table Saw Gauge is a breeze, thanks to the handy mounting bracket for quick attachment to your table saw or band saw. With an easy-to-use interface, no special skills or training are needed to operate the gauge. The system incorporates a self-adjusting "Smart Bar" that stays secure even in uneven miter slots. The spring plungers require just one adjustment, ensuring a perfect fit thereafter in the miter slot.
Durable: Made with a sturdy 3.2 inch long anodized aluminum bar, this gauge can withstand constant use in a workshop machinery environment. The six holes for the dial indicator rod allow for adjustment of accuracy for different workshop machines, even if the distance between the chamfer groove and the blade is different.
Digital dial indicator: The digital dial indicator with an accuracy of 0.01mm/0.0005" is perfect for aligning and calibrating workshop machinery such as band saws and drill presses. The length of the extension rod is extended from 13cm to 18cm, providing better applicability.The easy-to-read LCD display shows clear and accurate measurements that can be zeroed with the push of a button for easy calibration.

CA$54.99