Advertising Disclosure
10 Best cts pots in Canada
Best Choice01MusiclilyCTS 450 A500K Pots Standard Split Shaft 3/8 Inch 10% Audio Taper Potentiometers for Electric Guitar Bass (Set of 4)
Main highlights- Package includes : 4 pieces potentiometers, locking washers, washers, nuts
- Fine 24-spline split shaft imperial sized pots for American-made guitar knobs, split shaft diameter: 6mm (15/64 inch), thread diameter: 9.5mm (3/8 inch), thread height: 9.5mm (3/8 inch)
- Features low noise, robust construction, proprietary anti-static lube, smooth feel, reduced shaft wobble, tinned solderable cover. 500K usually used for humbuckers, remains more high-end frequencies, gives brighter tone than 250K
- CTS pots have long been the first choice in American guitars, fits most USA electric guitars and basses like ST, TL, LP, SG
- Audio taper, resistance: 500K, tolerance: 10%. Aluminum shaft and bushing
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Musiclily
CTS 450 A250K Pots Short Split Shaft 1/4 Inch 10% Audio Taper Potentiometers for Electric Guitar Bass (Set of 4)
Main highlights- Package includes : 4 pieces potentiometers, locking washers, washers, nuts
- Fine 24-spline split shaft imperial sized pots for American-made guitar knobs, split shaft diameter: 6mm (15/64 inch), thread diameter: 9.5mm (3/8 inch), thread height: 6.5mm (1/4 inch)
- Features low noise, robust construction, proprietary anti-static lube, smooth feel, reduced shaft wobble, tinned solderable cover. 250K usually used for single coil pickups, bleeds off some of the high frequencies to ground, gives warmer tone than 500K
- CTS pots have long been the first choice in American guitars, fits most USA electric guitars and basses like ST, TL, PB, JB
- Audio taper, resistance: 250K, tolerance: 10%. Aluminum shaft and bushing
9.7Exceptional
Show more
- 03KAISH
CTS 500K Electric Guitar Pots Guitar Audio Potentiometer A500K
Main highlights- Split shaft with Fine Spline Knurled; Shaft Length:18.5mm; Shaft Diameter: 6mm; Base Diameter: 24mm
- Package includes: 1x CTS Pots; Comes with Nut and Washer
- It's made in CTS Taiwan Company, we have shown the detailed factory diagram for the pots, please verify the diagram if you have any doubts. CTS has several factories that all of them can produce guitar pots
- Generally speaking, Audio Taper (A) are always used as Tone and Linear Taper (B) are always used as Volume, but you can use Audio Taper as Volume and Linear Taper as Tone as well, it usually depends on your personal preference.
- A' means Audio Taper which increases or decreases in a sloped curve fashion ; 'B' means Linear Taper which increases or decreases in a linear fashion
9.6Exceptional
Show more
Value for Money04MusiclilyCTS 450 A500K Pots Long Split Shaft 3/4 Inch 10% Audio Taper Potentiometers for Electric Guitar Bass (Set of 2)
40% OffMain highlights- Package includes : 2pcs potentiometers, locking washers, washers, nuts
- Fine 24-spline split shaft imperial sized pots for American-made guitar knobs, split shaft diameter: 6mm (15/64 inch), thread diameter: 9.5mm (3/8 inch), thread height: 19mm (3/4 inch)
- Features low noise, robust construction, proprietary anti-static lube, smooth feel, reduced shaft wobble, tinned solderable cover. 500K usually used for humbuckers, remains more high-end frequencies, gives brighter tone than 250K
- CTS pots have long been the first choice in American guitars. Long shaft pots are often used on some USA electric guitars and basses like LP, SG
- Audio taper, resistance: 500K, tolerance: 10%. Aluminum shaft and brass bushing
9.4Excellent
Show more
- 05
FenderFender 0990830000 Pure Vintage Original 250k Splitshaft Potentiometer, Volume or Tone
Main highlights- Includes nut, washer, and tone capacitor
- For use as a volume or tone control on single coil pickups
- Fender original factory part
- 250K split shaft
9.2Excellent
Show more
- 06KAISH
CTS 250K Electric Guitar Pots Guitar Audio Potentiometers A250K
Main highlights- This pot was made in CTS Taiwan Company, it was not made in CTS USA Company
- Split shaft with Fine Spline Knurled; Shaft Length:18.5mm; Shaft Diameter: 6mm; Base Diameter: 24mm
- Please contact us first if you have any questions about this item
- Package includes: 1x CTS Pots; Comes with Nut and Washer
- CTS company have several factories in USA and Taiwan that all of them can produce guitar pots
9.1Excellent
Show more
- 07Musiclily
CTS 450 A250K Pots Solid Standard Shaft 3/8 Inch 10% Audio Taper Potentiometers for Electric Guitar Bass (Set of 2)
Main highlights- Solid shaft imperial sized pots for 6.35mm (1/4 inch) American-made guitar solid knobs, DO NOT fit for any 6mm knobs. Shaft diameter: 6.35mm (1/4 inch), thread diameter: 9.5mm (3/8 inch), thread height: 9.5mm (3/8 inch)
- Package includes : 2 pieces potentiometers, locking washers, washers, nuts
- Features low noise, robust construction, proprietary anti-static lube, smooth feel, reduced shaft wobble, tinned solderable cover. 250K usually used for single coil pickups, bleeds off some of the high frequencies to ground, gives warmer tone than 500K
- CTS pots have long been the first choice in American guitars, fits most USA electric guitars and basses like TL, JB, PB
- Audio taper, resistance: 250K, tolerance: 10%. Aluminum shaft and bushing
9.0Excellent
Show more
- 08Musiclily
CTS 450 A250K+A500Kx2 ST-HSS Guitar Pots Short Split Shaft 1/4 Inch and Standard Split Shaft 3/8 Inch 10% Audio Taper Potentiometers
Main highlights- Package includes: 1 piece A250K and 2 pieces A500K potentiometers, locking washers, washers, nuts
- Fine 24-spline split shaft imperial sized pots for American-made guitar knobs, split shaft diameter: 6mm (15/64 inch), thread diameter: 9.5mm (3/8 inch), thread height: 6.5mm (1/4 inch) and 9.5mm (3/8 inch)
- Features low noise, robust construction, proprietary anti-static lube, smooth feel, reduced shaft wobble, tinned solderable cover. We have professional wiring diagram to solve your wiring problem
- CTS pots have long been the first choice in American guitars. These pots are used on 5-way super switch coil-splitting guitar, fits Fender ST HSS or other similar style guitar
- Audio taper, resistance: 250K/500K, tolerance: 10%. Aluminum shaft and bushing
8.9Very Good
Show more
- 09
Fender
Fender 500K Solid Shaft CTS Potentiometer
Main highlights- Model Number: 0990835000
- Includes .022uF capacitor, the most commonly used size with humbuckers.
- Country of Origin: Taiwan
- 500K Solid Shaft Potentiometer
8.6Very Good
Show more
- 10Qiilu
Cts 500K Push Pull Pots For Guitars Push Pull Pot 500K Copper(Mainly) A500K Electric Guitarr Potentiometer Pull Button Switch Pot Pickup Switch
Main highlights- Specification ---- Material: Copper(mainly), Potentiometer category: A500K, Linear Potentiometer, Full 500K ohm, Dimensions: Approx. 4.8 x 2.5 x 1.5cm / 1.9 x 1 x 0.6in, Weight: Approx. 18g, Package List: 1 x A500K Push Button Switch Potentiometer
- Performance ---- A500K guitar press bounce switch potentiometer, used for tone control of electric guitar bass. Select the appropriate connection mode, and the 2 gears respectively run different pickup combinations.
- Material ---- 500k push pull cts is made of premium material, stable current, easy installation and
- Easy to use ---- Two level switch, with built-in spring, can be switched by pressing without lifting.
- Application ---- CTS push pull pot 500k is suitable for instrument makers, guitar lovers to repair, transform, manufacture electric guitar.
8.3Good
Show more
