Advertising Disclosure
10 Best cpvc pipe brand in Canada
Best Choice01OateyOatey 30821 All-Purpose ABS, PVC and CPVC Medium Body Clear Cement, 8 oz
Main highlights- Recommended for potable water, pressure pipe, conduit and DWV
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
- Meets performance requirements of ASTM D2564, ASTM D2235 and ASTM F493
- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
- Always check local codes for acceptability of this product
9.9Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money02SharkBiteSharkBite Max 3/4 Inch x 3/4 Inch FIP x 18 in. Corrugated Flexible Water Heater Connector, Push to Connect Brass Plumbing Fitting, Stainless Steel, URSS3088FX18BV
10% Off Free ShippingMain highlights- STRONG AND DURABLE: Reinforced stainless-steel collar locks in the cartridge and reduces insertion force by 50 percent; connector rotates after installation
- RATED PERFORMANCE: Made from quality forged DZR brass and stainless steel, this plumbing fitting is suitable for commercial and residential plumbing; rated to 180 degrees F and 200 PSI
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max fittings eliminate flow restriction when used with copper or CPVC
- INTEGRATED BALL VALVE: Built-in shut-off valve allows easy isolation of the water heater during repairs; designed for electric or gas water heaters with a flue vent
- FAST AND EASY INSTALL: This SharkBite Max 18 in. L x 3/4 in. PTC x 3/4 in. FIP water heater connector quickly joins PEX, copper, CPVC, PE-RT, and HDPE without glue, solder, or tools; ideal for wet lines
9.7Exceptional
Show more
- 03
OateyOatey 31911 LO-V.O.C. CPVC Flowguard Gold 1-Step Yellow Cement, 8-Ounce
Main highlights- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
- For copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2"" diameter interference fit.
- For cold water systems and hot water systems up to 200
- F / 93
9.6Exceptional
Show more
- 04SharkBite
SharkBite 1/2 Inch PEX Metal 90 Degree Bend Support, 23053
Free ShippingMain highlights- VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
- LEAD-FREE: Made of high-quality forged DZR brass that is lead-free
- INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue; Just push to create a watertight seal
- HIGH QUALITY: SharkBite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times
9.4Excellent
Show more
- 05SharkBite
SharkBite U860W25 1/2-Inch PEX Tubing, 25 Feet, White, for Residential and Commercial Potable Water Applications
Main highlights- Perfect for wet or dry installations and immediate pressure testing.
- Flexibility means fewer fittings, limited potential leak points, and lower cost.
- Durable, freeze resistant tubing expands and contracts with temperature changes.
- Compatible with SharkBite or barb fittings using crimp or clamp connections.
- Approvals: NSF/ANSI 61, NSF/ANSI 14, CSA B137.5, ASTM F-876/877, AWWA C904
9.3Excellent
Show more
- 06SharkBite
SharkBite UXL0441 1-1/2" End Cap, Misc
Free ShippingMain highlights- VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination; includes 4 end caps
- QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- PERFORMANCE: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times
- INSTALLS IN SECONDS: 1/2 inch End Cap requires no soldering, crimping, or glue; Just push to create a watertight seal
- COMPATABILITY: Same as part numbers U514LFZ and U514LF
9.2Excellent
Show more
- 07HQMPC
HQMPC Push Elbow Coupling with Union 1/2" X1/2" 2Pcs No Lead Push-to-Connect Plumbing Fittings Brass Pipe Connector Fittings for Copper PEX CPVC
Free ShippingMain highlights- Package Includes: 1/2 Inch FNPT Elbow (2 PCS); 1/2 Inch Disconnect Clip (1 PC)
- Lead Free Brass: Pex Pipe Fittings High quality lead free bras, healthy and safe.
- Easy Installation: 1/2" push in fitting ID is 0.65", Suitable pipe id is 0.62- 0.64"
- Connect fittings Push to connect to Copper, PE-RT, PEX, CPVC or brass pipe.
- Certification:Push in fititng Certified & Compliant ,UPC, ANSI/NSF-61, push fit fittings can withstand up to 200 PSI and 200°F
9.0Excellent
Show more
- 08Oatey
Oatey Pipe Joint Compound 4 Oz White
Main highlights- Withstands up to 3,000 PSI on gases from -50° to +400°F, and 10,000 PSI on liquids from -50° to +500°F.
- White, non-hardening, non-separating, non-toxic paste.
- Lubricates and seals all threaded joints.
- For use with water, steam, caustics or dilute acid lines of PVC, CPVC, ABS, cycolac, polypropylene, iron, steel or copper.
8.9Very Good
Show more
- 09blekoo
BLEKOO PVC Pipe Reamer 1-1/2 Inch, PVC Socket Saver, Fit Into Standard 1/2" Drills
Free ShippingMain highlights- Versatile Plumbing Solution for Home & Pro Projects: Perfect for Schedule 40 PVC/CPVC/ABS pipes in pool systems, hot tubs, bathroom remodels, and HVAC work. Note: Not for Schedule 80 pipes. Ideal for DIYers and contractors tackling drain lines, ventilation, or irrigation upgrades.
- Easy 3-Step Operation | Drill-Powered Efficiency: ①Secure in any drill chuck ② Set to low RPM ③ Center-drill for flawless results. Pro Tip: Use water cooling (spritz bottle) to prevent pipe warping. Built for precision – no specialized skills required!
- Cost-Effective Pipe Repair Solution | Reuse Valves & Flanges: Eliminate costly pipe replacements! Safely remove cement residue from fittings to salvage valves/flanges. Reduce material waste by 60%+ and slash labor time – designed for sustainable plumbing repairs.
- 4-Sided Rotating Carbide Cutter | Leak-Free Connections Guaranteed: Heat-resistant tungsten carbide blades stay razor-sharp through heavy use. Rotate cutting edges 4x for extended lifespan. Achieve smooth, burr-free finishes every time – critical for watertight seals.
- 1-1/2 inch PVC Pipe Reamer | Professional-Grade Plumbing Tool: For standard pipe repairs. Features universal 1/2-inch drill compatibility, 3/8" hex spindle
8.8Very Good
Show more
- 10SharkBite
SharkBite 3/4 Inch 90 Degree Elbow with Drain Vent, Push to Connect Brass Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U5256LFA
Free ShippingMain highlights- VERSATILE: Elbow connector fits PEX, copper, CPVC, PE-RT, and HDPE pipe in any combination
- LEAD FREE: 90 degree elbows are made of durable high quality forged DZR brass which is lead free
- INSTALLS IN SECONDS: 90 degree elbow pipe connectors with drain vents require no soldering, crimping, or glue, just push to create a watertight seal; can be installed in wet lines
- HIGH QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- CERTIFIED: SharkBite plumbing fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times; approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
8.6Very Good
Show more
