Advertising Disclosure
10 Best cpvc brands in Canada
Best Choice01SharkbiteSharkBite 15 Inch Frost Free Sillcock, 1/2 x 3/4 Inch MHT, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 24637LF
Free ShippingMain highlights- VERSATILTY: SharkBite connects Copper, PEX, CPVC, PE-RT and HDPE Pipe in any combination
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
- QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
- PERFORMANCE: Rated to 200 PSI and 200 Degree F. Use in Potable water and Hydronic Heating applications
- INSTALLS IN SECONDS: 1/2 inch push-fit inlet x 3/4 inch MHT outlet Sillcock Valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
9.7Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02AB
(Pack of 5) AB 3/4 Inch Push to Connect Ball Valve, 3/4 Inch Water Shut Off Valve with Disconnect Clip, Full Port Push Fit Ball Valve for Copper, CPVC and PEX Pipe, UPC Certified
Free ShippingMain highlights- Versatile Use: AB water shut off valve plumbing fittings are compatible with all brands of copper tubing, PEX tubing, CPVC and HDPE Pipe and connects them in any combination.
- Reliable quality: Directly from our reliable Pex Fitting Manufacturers, UPC Certified; Compliance with NSF/ANSI 61,section 8
- Easy For Installation: This 3/4 inch push fit valve requires no special tools, no soldering, no crimping or glue; Push-to-connect design provides an efficient application that saves time and money, just need a push to create a watertight seal.
- 200 PSI and 200°Fl LEAD-Free, widely used in pluming industry.
- 100% Satisfaction Service: We provide 100% satisfaction service together with preimium quality product. If you have any question about our product, please contact us freely, we will sort out for you immediately.
9.4Excellent
Show more
- 03Oatey
Oatey 30821 All-Purpose ABS, PVC and CPVC Medium Body Clear Cement, 8 oz
Main highlights- Recommended for potable water, pressure pipe, conduit and DWV
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
- Meets performance requirements of ASTM D2564, ASTM D2235 and ASTM F493
- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
- Always check local codes for acceptability of this product
9.3Excellent
Show more
- 04
OateyOatey 31911 LO-V.O.C. CPVC Flowguard Gold 1-Step Yellow Cement, 8-Ounce
Main highlights- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
- For copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2"" diameter interference fit.
- For cold water systems and hot water systems up to 200
- F / 93
9.2Excellent
Show more
Value for Money05XFITTING10 PIECES XFITTING 1/2" PEX X 1/2" CPVC COUPLING, TRANSITION COUPLING, BRASS PEX B CRIMP FITTINGS - BRASS
Main highlights- XFITTING PEX Compatible with all types and brands of PEX B Tubing - Watts, Everhot, Viega, Zurn, Nibco, Bow, etc.
- Work with Crimp Connection System (PEX Crimp tool + Copper Crimp Rings) or Clamp Connection System (PEX Clamp tool + Stainless Steel PEX Clamps)
- Design certified to ANSI-61/NSF and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.
- 400 PSI, Approved to be used underground and behind walls without access panels
9.1Excellent
Show more
- 06EFIELD
(Pack of 5) EFIELD 1/2" Pex x 1/2" CPVC Transition Coupling Barb Crimp Brass Fittings. (5)
Main highlights- Resistant to Corrosion Due to DZR Brass.
- Pex Side Suits with all Brands of Pex Tubing
- Pex Connection Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems
- Directly Supplied by One of the Biggest Pex Piping Manufacturers
- 5 PCS 1/2" Pex x 1/2" CPVC Transition Coupling Barb Crimp Brass Fittings.
9.0Excellent
Show more
- 07Sharkbite
SharkBite 3/4 Inch 90 Degree Elbow with Drain Vent, Push to Connect Brass Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U5256LFA
Free ShippingMain highlights- VERSATILE: Elbow connector fits PEX, copper, CPVC, PE-RT, and HDPE pipe in any combination
- LEAD FREE: 90 degree elbows are made of durable high quality forged DZR brass which is lead free
- INSTALLS IN SECONDS: 90 degree elbow pipe connectors with drain vents require no soldering, crimping, or glue, just push to create a watertight seal; can be installed in wet lines
- HIGH QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- CERTIFIED: SharkBite plumbing fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times; approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
8.8Very Good
Show more
- 08WiseWater
WiseWater 1 Pack 1/2" Push Fit x Dual 3/8" OD Compression Straight Stop Valve, 1/4 Turn Double Handles Shut Off Valve with Disconnect Clip, Chrome Plated Brass, Copper, PEX, CPVC, PE-RT Pipes
Free ShippingMain highlights- Widely Applications: Our push-to-fit shut-off water valve meets UPC certification standards, NSF/ANSI 61 and NSF/ANSI/CAN/372. It can use in potable water or hydronic heating pipe.
- Premium Materials: The compression straight stop valves are made with chrome-plated brass material. It complies with drinking water standards. It features resist corrosion, ductility at high temperatures, and low magnetic permeability.
- Package Includes 1Pc 1/2 Inch Push x 3/8 Inch OD Comp x 3/8 Inch OD Comp straight stop valve with 1/4 turn double on/off handle. 1Pc Disconnect Clip.
- Easy to Installation: The double compression valve requires no special tools, no soldering, no crimping, or glue; PEX installations require plumbing PEX tube insert PEX fitting.
- Compatible with Products: The dual shut off valve of the plumbing fittings is compatible with all brands of copper, PEX, CPVC, and PE-RT Pipe.
8.7Very Good
Show more
- 09RUBY.Q
6 Pack 1/2" Push-to-Connect Plumbing Fittings, 1/2" Straight/Elbow/Tee Plumbing Fitting with 1/2" Disconnect Clip, Lead Free Brass Pushfit Fittings for Copper, PEX, CPVC Pipe
Main highlights- 【Wide Application】- Pushfit straight coupling kits can fit copper, CPVC, PE-RT and PEX pipe, and they can connect all types in any combination.
- 【Professional and Safe】- All plumbing fittings meet the same standards for commercial and residential plumbing applications. Push fit fittings can withstand up to 200 PSI and 200°F.
- 【Product Dimension】- This package includes 6 pack 1/2" pushfit straight coupling plumbing fittings and 1 pack 1/2" disconnect clip tool, push-to-connect plumbing fittings can be used in potable water and hydronic heating applications.
- 【Lead Free Brass】- 1/2" straight coupling plumbing fittings are made of high-quality forged DZR brass that is lead-free. They are durable, high-strength and anti-corrosion.
- 【Easy to Install】- Pushfit straight coupling kits are easy to install, and they are removable and reusable by included disconnect clip. You just need to insert the pipe into the fitting deep enough by hands without soldering, clamps or glue required. They can even be rotated after assembly for easier installation in tight spaces.
8.6Very Good
Show more
- 10WiseWater
WiseWater 1/4 Turn Angle Stop Valve, 1/4" O.D Compression x 1/2" PEX Water Shut Off Valve, Chrome Plated Brass Plumbing Fitting for PEX, CPVC, Copper Tube (10 Pack)
Free ShippingMain highlights- Widely Applications: Our push-to-fit shut-off water valve meets UPC certification standards, NSF/ANSI 61 and NSF/ANSI/CAN/372. It can use in potable water or hydronic heating pipe.
- Premium Materials: The angle stop valves are made with chrome-plated brass material. Resist corrosion and high temperature. 1/2 Pex shut-off valve manufactured standard drinking water, NSF/ANSI 61 and NSF/ANSI/CAN/372.
- Package Includes: 10Pcs 1/4 Inch OD Compression x 1/2 Inch PEX angle stop valve, and 10pcs 1/2 PEX stainless steel clamp rings.
- Easy to Installation: The valve requires no special tools, no soldering, or glue; It can use copper crimp rings or stainless steel PEX clamps and PEX clamp tools to make pipe connections.
- Compatible with Products: The water shut-off valve of the plumbing fittings is compatible with all brands of copper, PEX, or CPVC Pipe.
8.5Good
Show more
