Advertising Disclosure
10 Best bms for ebike battery in Canada
Best Choice01XBERSTAR13S 6P 48V Electric Bike Lithium Battery Case with 20A Balance BMS Including Holder Nickel For E-Soccter Battery 48V Use DIY Battery Storage Box in Series Plastic Batteries Case for 18650 Battery
Main highlights- You will get:1*48V 13S6P Lithum Battery Box,1 set Strip Nickel,1 set Bracket.And 13S 6P 48V Lithium Battery BMS.(Not include batteries)
- Tough material: using tough material, high strength, good toughness, not easy to crack.
- Note: Please use new batteries, do not use new and old batteries together. If you need a video, please contact customer service.
- It is suitable for DIY and maintenance of all kinds of dc equipment, it is easy to use.
- Applications: electronic DIY, LED lighting power supply, low voltage electrical equipment, Electric bicycle charging
9.6Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Cywhrvzsf
4S 100A DC14.6V BMS LiFePO4 Battery Balance Charge Board NTC Temperature Protection Equalizer
Main highlights- [Satisfactory Service]: We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- When any series of battery cells or wires in the battery pack fault short circuit can disconnect the output power protection battery pack
- Voltage :dc14.6v Discharge current :100a Charging current (same port):≤50a Internal resistance of main circuit conduction :≤5mq Discharge overcurrent protection :600+ 10a Power consumption :≤40ua Hibernation overdischarge power consumption :≤10ua
- Overcharge protection, balance protection, over discharge protection, over current protection, short circuit protection, electrostatic protection, weak current switch
- High quality MOS tube with low internal resistance, all aluminum material, fast heat dissipation
9.3Excellent
Show more
- 03kananana
10S 36V 35A BMS PCB PCM Protection Li-ion Battery Board + Balance for E-Bike
Free ShippingMain highlights- 5. With temperature control protection function, safe and reliable
- 4. Suitable for electric vehicles, electric mopeds, scooters, inverters, etc.
- 3. Support overcharge protection, overdischarge protection and short circuit protection.
- 2. It has a balance function to ensure that each battery cell is fully charged at the same time.
- 1. The protection board is suitable for 10 lithium-ion batteries in series, and can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
9.1Excellent
Show more
Value for Money04Walfront13S 30A BMS 48v Board BMS PCB Board for 3.7V Lithium Battery, Overcharge, Overdischarge, Overcurrent and Short Circuit
Free ShippingMain highlights- THICKENED ALUMINUM FIN: Equipped with thickened aluminum fin to achieve quick heat dissipation.
- QUALITY ASSURANCE: This product has gone through load and aging test for quality assurance.
- PROLONG BATTERY LIFE: With balance charging to balance the characteristic of each battery in battery pack and prolong battery life.
- FUNCTIONS: Provide a variety of functions including overcharge, overdischarge, overcurrent and short circuit
- FAST AND SAFE CHARGING: Adopt intelligent lithium cell management IC for fast and safe charging.
8.8Very Good
Show more
- 05Generic
7S 10S 13S Electric Bike Battery BMS with 30A Constant Current for 24V 36V 48V li ion ebike BMS (13S li ion 30A)
Main highlights- with same charge and discharge port and passive balance function
- With free connection wires ,cable connector and BT Module will be included
- With ON OFF switch function and high temperature detection function
- Applied high level Mosfet with less resistance to work with load with less heating than normal Mosfet
- Application : fit for 7S 10S 13S lithium NCM battery application with 30A constant current
8.7Very Good
Show more
- 06Walfront
48V BMS 13S Battery Management System 13 Cell Lithium Ion Battery Module with Cable for 3.7V Ternary Batteries Manganese Acid Batteries, Electric Vehicles Scooters Battery Board
Main highlights- Multiple -- The battery supports overcharge , discharge and short circuit . With temperature control function, with safe and characteristics, you can use the BMS with confidence.
- Battery Management System -- Package List: 1 x BMS; 1 x Cable.
- BMS Battery Module -- Ternary 3.7. The board is a 13 cell lithium ion battery, which can be used for 3.7V ternary batteries, manganese acid batteries, and cobalt acid batteries.
- Aluminum Alloy Material -- Made of aluminum alloy material, the BMS has the characteristics of durability and long service life.
- 13S BMS Board -- Has a wide range of applications, suitable for electric vehicles, scooters, inverters, etc., to meet your needs.
8.5Good
Show more
- 07Generic
BeMuchSafer 13S 30A 48V Battery BMS Separate Port with On/Off Switch Temperature Sensor Charging Port with Diode 13S30A 46.8V BMS for DIY Polly Hailong eBike Battery Pack (13S30A 48V with Switch)
Main highlights- Special function: Charging port is protected by diode (Charging port with diode on the charging input circuit)
- Size: 65*35*11mm
- Max. Continuous Discharge Current: 30A
- Max. Continuous Charging Current: 5A
- Charging and discharging in the separate port
- BeMuchSafer BMS-B13S023-13S30A 48V
- Balance function: without
8.2Good
Show more
- 08Walfront
13S 48V 54.6V Battery Protection Board BMS with 15A Discharge 5A Charge for Electric Bikes Scooters Power Tools
29% OffMain highlights- Smart Fail-Safes - Triple-layer short circuit protection activates in <500μs and auto-resets after fault clearance
- Precision Protection - Advanced 13S BMS with ±25mV voltage detection accuracy for reliable overcharge (54.6V)/overdischarge protection, extending battery lifespan by 30%+ compared to basic boards
- Multi-Battery Compatibility - Universally supports ternary/manganese/cobalt lithium cells with auto-balancing function
- High-Power Ready - 15A continuous discharge (45A peak) with separated 5A charging port, engineered for 500W+ ebike motors without voltage drops
- Compact Integration - 50×40×6mm footprint with <8mΩ resistance, ideal for space-constrained EV/solar/power tool battery packs
8.0Good
Show more
- 09Deeoee
BMS 10S 36V 20A Li-ion Lithium Battery Charge Protection Board Charge Discharge Common Port BMS Balancer PCB for Ebike Scooter
Main highlights- BMS 10S 36V 20A Li-ion Lithium Battery Charge Protection Board Charge Discharge Common Port BMS Balancer PCB for Ebike Scooter
7.7Good
Show more
- 10JZK
JZK 5PCS 2S 7.4V Lithium Battery Protection Board Module, 7.4v 8.4V 2S BMS PCM Charge Discharge Protection Board for Li-Ion Lipo Battery 18650
Free ShippingMain highlights- Reminder: When combining batteries, the voltage, capacity and resistance of the batteries should be well matched. The battery voltage should be around 3.7V at the rated voltage. There is no output after the battery pack is assembled, and it can be charged with 8.4V voltage.
- Package contains:5 pieces of 7.4v 8.4V 2S lithium battery protection board. Size: 41*16*3.5mm. 2S 7.4V Li-ion battery protection board, built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit).
- Over charge voltage range: 4.25v±0.05v. Over discarge voltage range: 2.9v±0.05v. Max. working current 8A. Max peak current: 10A. Working current: 8.4V - 9V.
- Life cycle :more than 50000hours. Resistance: Less than 300mΩ. Short cut protection, charge can repair.
- High-accuracy voltage detection circuit; terminal of the charger using high voltage device; MOS transistor can control the battery charge and discharge; low standby current consumption.
7.5Good
Show more
