Advertising Disclosure
10 Best bldc controller in Canada
Best Choice01Walfront3-Phase Brushless Motor Controller Board DC 5V-36V CW CCW Three-phase Reversible Motor Drive Regulator Switch 15A
Free ShippingMain highlights- [Support Motor Type]: This speed controller switch is suitable for three-phase brushless motors, and supports CW CCW motors, stable performance, simple and most cost-effective multi-function
- [Speed Adjustment Method]: The speed of the motor can be adjusted by a potentiometer (270 degree linear), which is easy to use. Wide speed range, 0-100%.
- [Simple Wiring]: Connect through barrier-type terminal blocks, and mark the corresponding wiring ports in detail to save your installation time.
- [Compact Structure]: The size of the motor speed controller is about 8 x 6 x 2.8 cm/3.15 x 2.36 x 1.1 inches, small in size and compact in structure, which can save installation space.
- Adjust the motor to be stable and noise-, with a wide voltage range of DC5-36v, and a current of 15A.
9.9Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02GODIYMODULES
1PCS SimpleFOC Shield SimpleFOC BLDC Motor Controller for FOC BLDC Motor Controller Board for Arduino Servo Stm32
Main highlights- VCC, GND: DC12-35V power supply.
- Three IR2104 gate drivers and two on-board INA240 high-precision current sensors are used to measure the A-B phase current.
- GPIO outlet can be directly inserted into For Arduino UNO and other development boards. IR2104 power supply jumper cap: Because IR2104 only supports a maximum of 20V power supply, when the VCC is less than or equal to 20V, the jumper cap is inserted at the left end, and the power supply voltage of IR2104 is equal to VCC. When the VCC is 20V larger. When the jumper cap is plugged into the right end, the supply voltage of IR2 104 is equal to 16V.
- Compatible open source project SimpleFOC Shield V2.0.4 can be directly plugged into For the Arduino NNO development board for use as a Shiled.
- BLDC drive circuit, support Hall, magnetic sensor and other encoders, power supply voltage DC12-35V.
9.8Exceptional
Show more
- 03SUNGOOYUE
BLDC Controller, DC 7‑24V 15A 200W 3 Phase Long Lasting Brushless Motor Speed Controller BLDC Potentiometer for Pump Fan
Free ShippingMain highlights- VERSATILE DESIGN:Can also be used with external PLC 0 to 5 analog control by connecting the potentiometer cable to related input
- EASY:This BLDC controller features simple . Just twist clockwise to increase and counterclockwise decrease, Providing you a hassle experience
- EASY:This BLDC controller features simple . Just twist clockwise to increase and counterclockwise decrease, Providing you a hassle experience
- CONSTRUCTION: Brushless Motor Controller is constructed with premium electric components materials for long lasting use, this BLDC motor controller offers performance and stability
- ACCURATE CONTROL:Brushless Motor Controller is equipped with a built in potentiometer for easy and accurate speed adjustments, with no need for external control
9.7Exceptional
Show more
- 04Keenso
5V-36V 350W DC Brushless Motor Controller BLDC PWM Driver Board with Cable Control Board Module
Free ShippingMain highlights- [Widely Applications]-- This brush less motor controller features wide voltage high power 350W, three-phase high speed brushless non-inductive(no need Hall) controller, PWM input, suitable for both small motor and large motor.
- [Practical & Safe Controller]-- This motor controller designed with over-current , which can greatly enhance the security. It was with an heat sink,and also coming with speed controller and forward -reverse switch cable.
- [Keenso Guarantee]-- 5V-36V 350W DC Brushless Motor Controller BLDC PWM Driver Board. We are The Original Owner And Registrant Of “Keenso". We promise to provide better after-sales service and quality assurance for you. Money Refund/ New Replacement and within 24h online answer.
- [Fit for DC Brushless Motor]-- This PWM driver board can be fit for DC brushless without hall sensor three-phase motors. High performance, Working voltage: 5-36V; Maximum current: 16A.Maximum power: 350W; Over current : yes.
- [Convenient Use]-- This BLDC PWM Driver Board can be used directly, wide voltage 5-36V, high power 350W, designed with heat sink, lead wire, control switch, convenient to use.
9.6Exceptional
Show more
Value for Money05RioRandRioRand 350W 6-60V PWM DC Brushless Electric Motor Speed Controller with Hall
Free ShippingMain highlights- Wide voltage (6-60V) high-power (350W) DC three-phase brushless Hall controller: Requires matching with a Hall sensor-equipped motor for normal operation. Only compatible with 120° electrical angle DC brushless Hall motors. Supports PLC 0-5V analog control and PWM control (amplitude: 2.5-5V). Suitable for brushless motor driver boards and high-power PLCs.
- The maximum voltage (60V) and power (350W) marked on the three-phase DC brushless Hall motor controller are extreme parameters under specific conditions. Leave a margin for actual use. Do not connect motors with significantly mismatched voltage/current/power relative to the driver module.
- Hall motor controller: Features terminal block interfaces, comes with a standard heat sink, and has an integrated speed potentiometer on the board. No fuse in the power supply circuit on the main board—external fusing is recommended. Reversing the positive and negative power connections will cause permanent damage to some on-board chips (even for a few seconds under high current).
- Forward/reverse rotation uses non-delayed hard commutation, and braking causes significant impact. Do not operate these two functions when the motor runs at full speed under high voltage—forced operation may damage power transistors and chips. The speed throttle must be reduced to below 50% first.
- During normal operation, the motor output has sampled overcurrent protection. Due to the module’s high power and current, do not manually short-circuit it when the module is not working properly—short-circuiting may burn wires or blow transistors. For the first wiring test, use low current and low voltage. Only after confirming it works properly, switch to high current and high voltage. Never let high voltage come into contact with components on the board.
9.4Excellent
Show more
- 06YELUFT
DC 6- 60V 20A 500W BLDC Three-Phase Brushless Motor Controller PWM Hall Motor Control Driver Board 12V 24V 48V with Forward/ Reverse/ Stop/ Brake Function
Main highlights- Note: There is no fuse in the power supply circuit on the mainboard. It is recommended to add one yourself. Reverse connection of the positive and negative poles of the power supply will cause permanent damage to some chips on the board. Do not connect a motor that is obviously inconsistent with the voltage and power of the drive module to avoid damage
- Note: Since the power current of the module is very large, please do not artificially short-circuit when the module is not working properly. Please use a small current and voltage test for the first wiring test. After it is OK, then pass a large current and high voltage. Since it is a bare board module for sale, pay attention to the insulation of the wiring wire heads. It is strictly forbidden to touch the parts on the board with strong voltage
- Instruction: There are three relatively thick phase wires on the motor, and there are also three phase wire interfaces on the driver board. They are marked with MA (U), MB (V), MC (W) and other similar characters. They are also connected accordingly. After confirmation, the main power supply is turned on, and the throttle of the potentiometer is turned about 20%, and it can rotate smoothly normally
- DC three-phase brushless controller: The Driver requires the motor to have a Hall sensor to work properly. This driver is only suitable for DC brushless motors with a Hall sensor of 120 degrees. It supports PLC 0-5V analog control and PWM control amplitude of 2.5-5V. Parameters: Working voltage: 6-60V (limit 60V with margin for use); Working current: rated 16A, peak 20A; Power: rated 200-300W peak 500W (with margin for enhanced heat dissipation when using high power); Overcurrent protection: Yes
- Connection: There are usually 5 Hall cables or interfaces on the brushless motor, two of which are Hall power supply lines and three are Hall signal lines. You should distinguish them, especially the Hall power supply line. Don't make a mistake. The Hall signal line is usually marked with a (Ha), b (Hb), and c (Hc). There are also three interfaces on the driver board with the words Ha, Hb, and Hc. Connect them accordingly
9.3Excellent
Show more
- 07Cuifati
Motor Driver Controller,DC 48V 500W CNC Brushless Spindle BLDC Motor Driver Controller,Stepper Motor Driver Nema tb6600 Single Axes Hybrid Stepper Motor for Small Equipment,Electric Power Tools
Free ShippingMain highlights- WS55-220 is a high performance,cost-effective 3 phase BLDC motor controller.Voltage range is from 20VDC to 50VDC
- This controller can be used in small equipment, Electric Power Tools, exhaust Fan, Jade grinding machine, Vibrating motor etc
- The driver is based on advanced technology and be provided with high speed, high , low noise, low vibration, over current , overload , less phase line. , phase line short , alarm output, speed output,
- The controller can drive the DLDC motor with HALL or without HALL
- External potentiometer control/external voltage control
9.0Excellent
Show more
- 08Balepha
DC 6-80V BLDC Brushless Motor Speed Controller Board 3-Phase PWM High Power 1600W CW CCW Reversible Switch Driver Board Motor Regulator No Hall
Main highlights- The module is bare by default. If the motor is driven below 5A current, it does not need to be forced to dissipate heat, but only needs to ensure normal ventilation. If the drive current exceeds 5A, it must be forced to dissipate heat.
- The length and width of the drive module is 78x57mm, the thickness of the plate is 1.6mm, the working voltage is 6-80V, and the anti-reverse connection protection is supported, and the module will not be damaged due to the power line reverse connection.
- Onboard LED indicator for standby, working, error and other states.
- Onboard FG speed feedback interface, calculation speed RPM=FG frequency Hz*60/pole number.
- Onboard CW/CCW steering interface, suspended for clockwise CW, short-circuited GND for counterclockwise CCW steering.
8.7Very Good
Show more
- 09GODIYMODULES
DC6-24V 1000W Brushless DC Motor BLDC 3-Phase Brushless Motor Driver Hallless DC Motor Drive Board Speed Controller Module with Potentiometer,ESC Speed Controller Regulator Support For PLC 0-5V analog
Main highlights- Working voltage: 6-20V (limit 24V)
- Over-temperature protection: Yes (over-temperature power is halved)
- Maximum speed: 224000 RPM (2 pole motor), 74000 RPM (6 pole motor), 40000 RPM (12 pole motor), 35000 RPM (14 pole motor).
- Maximum power: 1000W,Overcurrent protection: Yes
- Locked-rotor protection: Yes (after locked-rotor, the current will automatically drop and run at intervals)
- Drive current: rated 30A plus air cooling 50A
- DC 6-24V 1000W 50A Brushless dc Motor BLDC 3-Phase Brushless Motor Driver Hallless DC Motor Drive Board Speed Controller Module with Potentiometer,ESC Speed Controller Regulator Support For PLC 0-5V analog input control
8.6Very Good
Show more
- 10Walfront
Brushless Motor Controller DC 12V-36V 500W 15A Hall BLDC Motor Balanced Car Driver Board
Free ShippingMain highlights- [HighQuality] Thebrushlessmotorcontrollerismadeofelectroniccomponentsforlongservicelife.
- [Good Performance] This driver board has many advantages including low consumption, high reliability and efficiency.
- [Functions] This board has many functions such as stall , enable control, over-current , steering control and speed control .
- [Feature] This brushless motor controller can withstand the temperature of -40 to 85°C/-40 to 185℉, easy to use.
- [Application] The motor controller is suitable for brushless DC motor.
8.5Good
Show more
