Advertising Disclosure
10 Best bilge pumps in Canada
Best Choice01
RuleRule 16A 3700 GPH Heavy Duty Bilge Pump, Non-Automatic, 24 Volt, White/Red
Main highlights- RULE 16A, RUL16A
9.6Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Rule
Rule LP900S LoPro Bilge Pump - 900 GPH, Automatic , Beige
Main highlights- Ultra Low-Profile Design: At just 2.4" (6cm) high, the Rule LoPro Series fits effortlessly into the tightest bilge spaces, bringing powerful pumping where traditional pumps can't go.
- Intelligent Automated Operation: Features two smart modes: automatically activates at user-selectable 2" (5cm) or 1.3" (3.25cm) water levels, or periodically checks for water every 2.5 minutes, ensuring continuous protection.
- Hassle-Free Installation: A fully rotating discharge body swivels 180º for easy plumbing, while multiple threaded discharge ports (3/4" (19mm) straight, 3/4" (19mm) right angle, 1" (25mm) and 1-1/8" (28mm) are all included for seamless setup.
- Enhanced Safety & Efficiency: New tricuspid check valves actively prevent backflow, keeping your bilge drier. Plus, versatile horizontal or vertical mounting options accommodate any boat's bilge configuration.
9.4Excellent
Show more
Value for Money03SeafloSeaflo 06 Series 750GPH 12V Automatic Boat Bilge Water Pump with Float Switch by Seaflo(750GPH)
Main highlights- No power use until pump is activated by internal float switch (when water level rises)
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- Compact, automatic, fully submersible electric pump
- Built-in float switch! (No separate float switch is needed)
9.3Excellent
Show more
- 04ECO-WORTHY
ECO-WORTHY Automatic 12V Bilge Pumps for Boats 1100GPH Auto with Float Switch for RV Caravan
Main highlights- Wire Lead: 1 m; Outlet Diameter: 29 mm,1-1/8 Inch; Width: Approx 81 mm
- No power use until pump is activated by internal float switch (when water level rises)
- Flow Rate: 1100 GPH; Volt: 12 V; Current: 3.8 A; Head: 4.0 M
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- Built-in float switch! (No separate float switch is needed)
9.1Excellent
Show more
- 05ECO-WORTHY
ECO-WORTHY Automatic 12V Bilge Pumps for Boats 1100GPH Auto with Float Switch for RV Caravan
Main highlights- Wire Lead: 1 m; Outlet Diameter: 29 mm,1-1/8 Inch; Width: Approx 81 mm
- No power use until pump is activated by internal float switch (when water level rises)
- Flow Rate: 1100 GPH; Volt: 12 V; Current: 3.8 A; Head: 4.0 M
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- Built-in float switch! (No separate float switch is needed)
8.9Very Good
Show more
- 06St !GIANTMAN
Submersible Boat Bilge Water Pump 12v 750gph 1100gph Marine Electric Bilge Pump for Ponds, Pools, Spas Silent, Boat Caravan RV Submersible
8.8Very Good
Show more
- 07Dontmiss
Dontmiss Automatic Submersible Small Boat Bilge Pump 12v 1100gph Auto with Float Switch Bilge Pump for Boat(Outlet Diameter：1 1/8") (1100GPH)
Main highlights- [HIGH-PERFORMANCE 1100 GPH FLOW RATE]: Equipped with a 3-blade impeller that delivers a higher flow rate than competing bilge pumps, this pump can efficiently and stably drain water to keep your boat dry and protected in demanding marine conditions
- Use the removable base to mount securely to the bilge floor Consider using shims if your bilge floor isn't perfectly level Make sure it won't shift or tip during boat movement The level installation is the most important factor - many customers initially had issues until they shimmed the pump to near-level position. You'll need 1 1/8 inch marine bilge hose to connect properly. Most boat supply stores carry this standard size - look for reinforced marine-grade bilge hose that can handle the pump's 1100 GPH flow rate without collapsing.
- This compact unit combines a pump and float switch into one integrated solution, reducing the need for separate components. Ideal for retrofitting or new installations, it simplifies bilge water management.
- Level Installation : Mount the pump as level as possible - this is essential for proper float switch operation. That even a 7.5° angle can cause the float to stick in the "on" position, draining your battery. Optimal Placement Aim for less than 2° off level for reliable automatic operation.
- Install at the lowest point in your bilge where water naturally collects Ensure adequate water depth around the pump (needs to be about 3/4 submerged to prime properly) Position where the pump can be easily accessed for cleaning the snap-off strainer..Features a removable base for quick cleaning and debris removal, keeping the pump in top condition。 Keep your bilge pump in top condition with minimal effort.
- Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3A; Head(M): 3.0M. Wire Lead(M): 1m; Outlet Diameter: 29mm/ 1 1/8" Width: Approx. 81mm
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.The built-in float switch activates the pump automatically when water levels rise and shuts it off when water is removed, ensuring consistent and worry-free operation.
- Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring.
8.7Very Good
Show more
- 08JYCESFY
1200GPH Boat Bilge Pump Kit 1-1/8 Inch Marine Bilge Pump Plumbing Kit with 6.5 FT Hose 2 Clamps and 1 Drainage Outlet, Thru-Hull Fitting, Ideal for Fishing Boats, Cruisers, Runabouts, Yachts
Main highlights- Versatile Specifications: Available in three different specifications, the bilge pump can be selected based on specific needs. It is suitable for various applications, including use at the bottom of boats, in swimming pools, and in fish tanks, providing flexibility for different scenarios
- The bilge pump features an impact-resistant ABS shell combined with corrosion-resistant internal materials. This robust construction ensures a longer service life, making the pump reliable for extended use in various conditions
- Easy to Clean: Boat Bilge Water Pump adopts the design of Snap-lock strainer base, which is easy to disassemble and clean
- Bilge pump built-in Float Switch: Automatic Boat Bilge Pumps are equipped with built in electronic controlled reed sensor system. No separate float switch required
- 1-1/8 Inch Marine Bilge Pump Plumbing Kit with 6 FT Bilge Pump Hose 2 Clamps and 1 Drainage Outlet
8.6Very Good
Show more
- 09Dontmiss
Dontmiss Automatic Submersible Small Boat Bilge Pump 12v 750gph Auto with Float Switch 3/4 inch (19mm) Outlet Dia, Bilge Pumps for Boats
Main highlights- This compact unit combines a pump and float switch into one integrated solution, reducing the need for separate components. Ideal for retrofitting or new installations, it simplifies bilge water management.
- The snap-off strainer facilitates effortless cleaning, ensuring optimal pump performance. Keep your bilge pump in top condition with minimal effort. Features a removable base for quick cleaning and debris removal, keeping the pump in top condition。
- The built-in float switch activates the pump automatically when water levels rise and shuts it off when water is removed, ensuring consistent and worry-free operation.
- Flow Rate (GPH): 750GPH; Volt: 12V; Current(A): 3A; Head(M): 3.0M. Wire Lead(M): 1m; Outlet Diameter: 19mm/ 3/4"; Width: Approx. 81mm
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring.
8.4Good
Show more
- 10Seaflo
SEAFLO 06 Series Automatic Submersible Bilge Pump - 1100 GPH, 12V, 1-1/8"" Outlet, 4-Year Warranty! Built-in Float Switch, Snap-Off Strainer, Compact for Marine Boat Yacht, CE & Rohs Certified
Main highlights- [ SPECIFICATIONS ]: Model: SFBP1-G1100-06 | Flow Rate: 1100 GPH | Voltage: 12V | Current: 3.0A | Max Draw: 6.0A | Wire Lead: 1m (3.0’) | Outlet Diameter: 1-⅛”
- [ SNAP-OFF STRAINER FOR EASY MAINTENANCE ]: Features a quick-release strainer base, making cleaning and maintenance effortless. Prevents clogging by trapping debris, allowing for smooth, uninterrupted operation, and extending the lifespan of your bilge pump.
- [ HIGH-PERFORMANCE 1100 GPH FLOW RATE ]: Equipped with a 5-blade impeller, this powerful pump removes large amounts of water quickly and efficiently. Its high-speed motor ensures optimal flow, preventing water buildup and protecting your vessel from flooding risks.
- [ EASY INSTALLATION WITH FLEXIBLE WIRING ]: Includes 18 AWG, 1m long leads for simple setup. Connect the brown-white wire to the positive terminal and the black wire to the negative terminal, making installation quick and hassle-free for all users.
- [ COMPACT, LIGHTWEIGHT & DURABLE DESIGN ]: Engineered for tight spaces, this small but powerful bilge pump is made with corrosion-resistant materials to withstand harsh marine environments. Ensures long-term durability without adding unnecessary weight to your vessel.
- [ BACKED BY A 4-YEAR WARRANTY ]: SEAFLO’s industry-leading 4-Year Warranty ensures peace of mind and reliable performance. Designed for durability, this pump withstands demanding marine conditions, providing long-term dependability for your boat or yacht.
- [ AUTOMATIC OPERATION FOR WORRY-FREE PERFORMANCE ]: The built-in float switch activates automatically when water levels rise and shuts off once water is removed. No need for manual operation—this smart system keeps your bilge clear without extra effort or monitoring.
- [ ALL-IN-ONE PUMP AND SWITCH ]: This fully automatic pump integrates a high-efficiency motor and float switch, eliminating the need for separate components. Perfect for retrofits and new installations, it simplifies bilge water removal with reliable and efficient operation.
8.3Good
Show more
