10 Best quiet sump pump in Canada

Advertising Disclosure

Last Updated - 2026/04/04

Best Choice

01
Wayne

Wayne CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump with Integrated Vertical Float Switch

9.7 worth the money

9.7 Easy installation

9.5 Noise level
Main highlights

Tough And Durable - Corrosion-resistant epoxy coated steel motor housing and stainless steel fasteners come with a cast-iron volute that provides long life in tough sump pump applications.
Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 3 years for dependable, efficient, & ultra-quiet performance.
High-Capacity Removal - This 1/2 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it's rain, snow melting, etc. WAYNE model CDU800 can pump up to 5,100 GPH to keep your basement dry.
Efficient Design - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!
Additional Features - 1-1/2 inch NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use, up to 10 time more than our competitors.
Show more
9.9

Exceptional

Show more
Curious about how we select the top products for you? Explore How It Works

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service levels, popularity trends, and more. The rankings reflect our opinion and should be a good starting point for shopping. By purchasing the products we rank, you’ll get the lowest price we found while we may receive a commission at no cost to you, which will help us continue to provide you with value.
02
Red Lion

Red Lion RL-SC50V 115-Volt, 1/2 HP, 4300 GPH Cast Iron Sump Pump with Vertical Switch, 10-Ft. Cord, Red, 14942747

19% Off

9.5 Easy installation

9.3 Noise level

8.7 worth the money
Main highlights

SPECIFICATIONS: 1/2 HP, 4300 GPH at 0-ft, 5.3 Amps, 10-ft. power cord, 28-ft. shutoff, suitable for basins 15-inches or greater; 1-1/2-inch FNPT discharge
PIGGY-BACK VERTICAL FLOAT SWITCH: activates pump when liquid reaches 7.25 inches and shuts off pump when water falls to 2.75 inches; can be unplugged from pump for maintenance/testing
ENERGY EFFICIENT MOTOR: 1/3 HP, 115-Volt, 4.4 Amp Permanent Split Capacitor (PSC) Motor with thermal overload protection; CSA listed in the USA and Canada
BUILT TO LAST: the Red Lion RL-SC Series features rugged cast iron housing, volute and clog-resistant impeller can handle semi-solids up to 3/8-inches
AUTOMATIC SUBMERSIBLE SUMP PUMP: piggy-back vertical float switch; pump activates when water reaches 7.25 inches and turns off when water reaches 2.75 inches; suitable for narrow sump pits
Show more
9.8

Exceptional

Show more
Value for Money

03
Wayne

Wayne CDU790 1/3 HP Submersible Cast Iron and Steel Sump Pump with Integrated Vertical Float Switch

26% Off

9.9 lasts a long time

9.9 Easy installation

9.9 worth the money
Main highlights

Tough And Durable - Corrosion-resistant epoxy coated steel motor housing and stainless steel fasteners come with a cast-iron volute that provides long life in tough sump pump applications.
Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 3 years for dependable, efficient, & ultra-quiet performance.
High-Capacity Removal - This 1/3 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it's rain, snow melting, etc. WAYNE model CDU790 can pump up to 4,600 GPH to keep your basement dry.
Efficient Design - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!
Additional Features - 1-1/2 inch NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use, up to 10 time more than our competitors.
Show more
9.7

Exceptional

Show more
04
DEKOPRO

DEKOPRO 3/4HP 4600GPH Sump Pump, Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch

13% Off

9.3 Simple to use

9.1 Easy installation

9.1 Noise level
Main highlights

【TOP SUCTION STRAINER】Built-in top suction strainer filter,DEKOPRO submersible cast iron & stainless steel sump pump can eliminates air locks and clogging from debris in bottom of sump pit.
【QUALITY WARRANTY】100% manufacturer tested and 2 years worry-free manufacturer's quality warranty. If you have any inquiries or problems, please do not hesitate to contact our service team, we are here to help for any concerns within 24 hours.
【HIGH-QUALITY MATERIALS】Stainless steel motor housing, cast iron volute, and glass reinforced thermoplastic impeller deliver the sump pump more robust and corrosion resistant and ensure long-lasting usage.
【HIGH-CAPACITY PUMPING】The 3/4HP high power basement sump pump moves up to 4600 gallons per hour and will lift water up to 29.5' of vertical height,perfect for keeping you basement dry during heavy water flow.
【AUTOMATIC FLOAT SWITCH】Vertical float switch to automatically turn the pump on/off. When water level is below 2.4 inch, the pump will automatically disconnect the power; when water level rises above 9.45 inch, the submersible sump pump will start again.
Show more
9.6

Exceptional

Show more
05
LANCHEZ

LANCHEZ 1/2 HP 5200 GPH Submersible Sump Pump Cast Iron and Stainless Steel with Integrated Vertical Float Switch, Sewage/Effluent Pump for Basement, Basin, Sewage System, 1-1/2" NPT Discharge
Main highlights

Wide Application-10FT extended length grounded waterproof power cord with portable handle for easy installation from farther locations. NPT1-1/2" discharge for high capacity pumping. Ideal for residential and commercial sewage & dewatering, such as sewage system, waste water drainage, sewer and basement flooding
Quality Service-With rigorous manufacturer testing. Includes 3-year technical support and professional assistance. If you have any questions, 24-hour customer support is available for assistance.
Powerful-The sewage ejector pump features a 1/2 HP efficient PSC motor, ensures great flow and is more energy efficient and quiet. Whether it' s rain, snow melting, etc., our sewer pump can pump up to 5200 gallons per hour and will lift water up to 26FT of vertical height, perfect for keeping you basement dry during heavy water flow
Built to Last-The cast iron and quality stainless steel casing ensures corrosion-resistant and reinforced construction with better cooling ability and longer life in tough sump pump applications. Built-in thermal overload protection will prevent the motor from burning out when dry running
Automatic Float Switch-Vertical float switch automatically turns on/off the pump depending on water level in sump basin. Switch on and off point is 10.24 and 4.33 inches. DO NOT lift the pump by the power cord or Vertical float switch, it could be damaged permanently
Show more
9.5

Excellent

Show more
06
PumpSpy

PumpSpy Silent Check Valve - 1-1/2" with Buna-N Couplings, Model CV-150, Spring-Loaded Flapper, Sump Pump Life Expectancy Increase, Includes Steel Clamps Fit 1-1/2″ Pipe

9.9 Easy installation

9.7 Noise level

9.5 worth the money
Main highlights

QUIET OPERATION: Our sump pump check valve has a unique spring-loaded flapper that helps eliminate the water hammer noise that standard check valves produce. The water hammer noise occurs when the discharged water slams the check valve flapper down. This silent check valve can bring a quiet operation to your sump pump.
KEEP WATER OUT: This check valve is designed to keep pumped water within the discharge pipe from falling back into the sump basin. A fully functional sump pump check valve can increase pump life expectancy by preventing water from being pumped twice.
INCLUSIONS: Our silent sump pump check valve comes with stainless steel clamps and Buna-N rubber couplings for quick installation. The clamps and couplings fit a 1-1/2" Schedule 40 pipe. Fits within a 5-1/8" gap.
CLEAR VALVE BODY: This check valve will provide visibility to water movement. With the valve's clear body, it's easy to visually confirm that pumped contents are moving, the pipes are not clogged, and the pump in the basin is fully operational.
ABOUT US: PumpSpy provides sump pump systems that help eliminate the unknowns of a sump outage and prevents costly damage. We also offer Smart Sump Pump Systems that automatically track incoming data and check that a sump pump is working properly.
Show more
9.3

Excellent

Show more
07
Little Giant

Little Giant BSP33V 1/3 HP, 115 Volt, 2880 GPH Automatic Submersible Epoxy Coated Cast Aluminum Sump Pump with Piggy-Back Vertical Switch and 8-Ft. Cord, Blue, 506251
Main highlights

SPECIFICATIONS: 1/3 HP, 4.4 Amps, 460 Watts, 60 Hz, 48 GPM at 5-ft lift, 25-ft shut-off, maximum 10.8 PSI, 1.5" FNPT discharge, 8-ft cord, 95°F liquid temperature rating
SCREENED RAISED INTAKE: prevents pump from picking up debris from the basin floor that could cause clogging or damage
LIGHTWEIGHT DESIGN: epoxy-coated cast aluminum housing; thermoplastic vortex impeller, cover, and volute; carbon/ceramic nitrile shaft seal; for easier installation or mounted as a backup pump
ENERGY EFFICIENT MOTOR: oil-filled PSC (permanent split capacitor) motor; CSA listed in the USA and Canada; thermally protected; 8-ft. power cord
AUTOMATIC OPERATION: Piggy-back vertical float switch; on at 7.25 inches, off at 2.75 inches; can be by-passed for manual operation; small footprint - fits basins 14 inches or larger
Show more
9.2

Excellent

Show more
08
Red Lion

Red Lion RL-SP50T 115-Volt, 1/2 HP, 3523 GPH Aluminum and Thermoplastic Sump Pump with Tethered Switch and 8-Ft. Cord, Red, 14942742

9.5 Easy installation

9.1 Noise level

8.0 worth the money
Main highlights

MOTOR SPECIFICATIONS: 1/2 HP; energy-efficient thermally protected PSC motor; 4.4 Amps; 474 Watts; 8-foot cord
CORROSION RESISTANT: epoxy-coated aluminum pump housing; thermoplastic volute, base and motor cover
CONVENIENT: 1-1/2-inch FNPT discharge with 1-1/4-inch adapter makes it easy to replace a pedestal pump
AUTOMATIC SUBMERSIBLE SUMP PUMP: included piggy-back tethered float switch; activates when water reaches 14.5 inches, shuts off when water falls to 5.5 inches
1/2 HP PUMP: delivers up to 3523 GPH with 28-foot shutoff
Show more
9.1

Excellent

Show more
09
LANCHEZ

LANCHEZ 1HP 6600 GPH Submersible Sewage Pump, Heavy Duty Cast Iron Effluent Pump with Automatic Tethered Float Switch, Sump Pump for Sump Basin, Basement, Residential, 2" NPT Discharge
Main highlights

[WIDE APPLICATION] 10ft extended length grounded waterproof power cord with portable handle for easy installation from farther locations. 2" NPT discharge for high capacity pumping. Ideal for residential and commercial sewage & dewatering, such as sewage system, waste water drainage, sewer and basement flooding
[Powerful] The sewage ejector pump features a 1HP efficient PSC copper motor, ensures great flow and is more energy efficient and quiet. Whether it' s rain, snow melting, etc., At a height of 0 feet, our sewage pump can pump up to 6,600 gallons per hour（At a height of 5 feet, it can pump 5,644 gallons), With its powerful horsepower, will lift water up to 23 ft of vertical height, making it an ideal choice for keeping basements dry during heavy water flow.
[CUSTOMER FIRST] With rigorous manufacturer testing, 3-year worry-free manufacturer after service. If you have any questions, 24-hour customer support is available for assistance.
[BUILT TO LAST] The cast iron casing ensures corrosion-resistant and reinforced construction with better cooling ability and longer life in tough sump pump applications. Built-in thermal overload protection will prevent the motor from burning out when dry running
[AUTOMATIC FLOAT SWITCH] Adjustable float switch automatically turns on/off the pump depending on water level in sump basin. When the water level rises above the pump, the pump will automatically start working. When the pump can not pump water, it will automatically disconnect the power
Show more
9.0

Excellent

Show more
10
LANCHEZ

LANCHEZ 1HP 6600 GPH Submersible Sewage Pump, Heavy Duty Cast Iron Effluent Pump with Automatic Tethered Float Switch, Sump Pump for Sump Basin, Basement, Residential, 2" NPT Discharge
Main highlights

[WIDE APPLICATION] 10ft extended length grounded waterproof power cord with portable handle for easy installation from farther locations. 2" NPT discharge for high capacity pumping. Ideal for residential and commercial sewage & dewatering, such as sewage system, waste water drainage, sewer and basement flooding
[Powerful] The sewage ejector pump features a 1HP efficient PSC copper motor, ensures great flow and is more energy efficient and quiet. Whether it' s rain, snow melting, etc., At a height of 0 feet, our sewage pump can pump up to 6,600 gallons per hour（At a height of 5 feet, it can pump 5,644 gallons), With its powerful horsepower, will lift water up to 23 ft of vertical height, making it an ideal choice for keeping basements dry during heavy water flow.
[CUSTOMER FIRST] With rigorous manufacturer testing, 3-year worry-free manufacturer after service. If you have any questions, 24-hour customer support is available for assistance.
[BUILT TO LAST] The cast iron casing ensures corrosion-resistant and reinforced construction with better cooling ability and longer life in tough sump pump applications. Built-in thermal overload protection will prevent the motor from burning out when dry running
[AUTOMATIC FLOAT SWITCH] Adjustable float switch automatically turns on/off the pump depending on water level in sump basin. When the water level rises above the pump, the pump will automatically start working. When the pump can not pump water, it will automatically disconnect the power
Show more
8.9

Very Good

Show more