Advertising Disclosure
10 Best cnc driver in Canada
Best Choice01CNCTOPBAOSCNCTOPBAOS 4 Axis Nema23 Stepper Motor CNC Kit 270oz-in 76mm 3A+TB6600 Driver 4.5A+4-axis USB Mach3 Board Motion Control Card 24V DC CNC Controller Kit for CNC Router Milling Machine
16% Off Free ShippingMain highlights- Model: 23HS8430 Nema23 Stepper Motor; Holding Torque: 270oz-in 180N.cm; Motor Size:57x57x76mm; Phase: 2 phase; 1.8° Step Angle; Type:Hybrid; Shaft: Dia 8mm Single shaft; Wiring: A+ : Red; A- : Green; B+ : Yellow; B- : Blue
- Functions of the USB Mach3 Board: Support the limit switch,E-stop switch, auto tool zero,home switch etc; Support for connecting electronic handwheel; Have 0-10V signal output,you can use mach3 software to control the spindle motor speed,can drive four relays for controlling the spindle starts, forward rotating and reverse rotating,pumps or other device
- Driver: TB6600 driver Voltage: DC 10V-45V; Current: rated maximum output reaches: ±4.5A ; Subdivision: full step, half step, 1/4 step, 1/8 step, 1/16 step, maximum 16 subdivisions
- 4 Axis USB Mach3 Motion Control Board:USB port is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers; This board does not require any drivers to be installed,as long as Mach3 can run, the control card can be used; Support system:Windows 2000/ XP / Windows 7/8/10; Max step-pulse frequency is 100KHz,which is suitable for the servo motor and stepper motor
- 350W 24V DC Switching Power Supply: AC input voltage range: 110V-120V AC or 220V-240V AC; selected by switch to choose input voltage
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money02CNCTOPBAOSCNCTOPBAOS 6 Axis NVCM USB Mach3 Control Board,Motion CNC Controller Card Stepper/Servo Motor Driver Breakout Board 125KHz 24-32V DC MACH3 Controller Card for CNC Router Engraver Milling Lathe Machine
Free ShippingMain highlights- Support software: This NVCM card only supports Mach3 software, through USB port to communicate with computer
- Specifications: 16 ports photoelectric isolated input interface; 16 ports photoelectric isolated output interface;1 port 0-10V spindle speed analog output interface,also can change to PWM output
- Multifunctions: Power supply interface, USB connection interface, Stepper/Servo Motor control output interface, spindle control output interface, Estop,Home,Limited switch and Tool setting input interface and so on
- Features: Support max 6 axis stepper systems; 125KHz pulse output for every axis; ARM motion control chip
- DC power supply input: main device is 24V-32V DC power supply input
9.7Exceptional
Show more
- 03COVVY
COVVY TB6600 4A DC 9-42V Stepper Motor Driver CNC Controller 32 Segments 2/4 Phase Hybrid Stepper Motor Driver Board
Free ShippingMain highlights- The maximum output current is 4.0A (peak, in 100ms), 8 output current optional.
- Suitable for any small automatic equipment and hardware, such as engraving machines, marking machines, cutting machines, laser photocopying, plotters, CNC machine tools, etc
- For 42, 57, 86 type, 2 / 4 phase, 4 / 6 / 8 wires stepper motor, The best application target torque is 1.8N.m and below below Nema17, Nema23 stepper motors
- 9V-42V DC power supply, H-bridge bipolar constant phase flow driver.
- 6 subdivision modes of up to 32 segments can be selected,and can be used for high subdivision purposes.
9.6Exceptional
Show more
- 04Zeelo
CNC Digital Stepper Driver DM556 Stepper Motor Controller 2-Phase Stepper Motor Driver 20-50V DC Max 5.6A 128 Subdivision for Nema 23, 24 and Nema 34 Stepper Motor
Free ShippingMain highlights- The maximum drive subdivision is 128, more accurate.
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor，2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise.
9.5Excellent
Show more
- 05ACEIRMC
CNC Shield Expansion Board V3.0 + 4pcs A4988 Stepper Motor Driver with Heatsink for Arduino Kits K75 3D Printer (CNC Shield+tepper Motor)
Free ShippingMain highlights- Package Contents: 1 x CNC Shield Board 4 x A4988 Stepper Motor Driver
- PWM SPINDLE AND DIRECTION PIN: PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
- MAIN FUNCTION: The extension board can be used for engraving machine or 3D printer driver
- A4988 Stepper Motor Driver Board is a breakout board for Allegro's A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection;
- 5.CNC Shield Expansion Board V3.0 + A4988 Stepper Motor Driver with Heatsink for Arduino Kits K75
9.4Excellent
Show more
- 06Zeelo
CNC Digital Microstep Driver DM542 Stepper Motor Controller 2-Phase Digital Stepper Motor Driver 20-50V DC Max 4.2A for Nema 17, Nema 23 and Nema 34 Series Stepper Motor, Replace M542 M542H
Free ShippingMain highlights- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 42,57,86 type 2-phase 4-phase (4-wire, 6-wire, 8-wire)
- Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor，2-phase hybrid stepper motors (Outer diameter: 42, 57,86mm).
- Package: 1piece DM542
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise.
9.3Excellent
Show more
- 07Funsto
TB6600 Stepper Motor Driver 4A CNC Controller for 42 57 86 Stepper Motor 17 Single-axis Stepper Motor for Arduino 3D Printer
Free ShippingMain highlights- Widely used in various small and medium-sized automation equipment and hardware,Such as: engraving machine, marking machine,cutting machine, laser phototypesetting, plotter,CNC machine tool, crystal grinding machine,automatic assembly equipment, etc.The best application object is 57 stepper motors and 42 stepper motors with a torque of 1.8N.m and below.
- This drive is an upgraded version of theTB6600, the breakdown of heightening to 32 segments,for high segmentation purposes. Applicable stepper motor: 42,57,86 type of 2-phase 4-phase(4-wire 6wire line 8)
- The upgraded version of TB6600 is a driver suitable for 57/42 type two-phase hybrid stepping motor with phase current below 4.0A.
- Set 7 kinds of subdivisions (1/2A/2B/4/8/16/32) through 6-bit DIP switch
- And 8 gear output current(0.5A/1.0A/1.5A/2.0A/2.5A/2.8A/3.0A/3.5A)
9.2Excellent
Show more
- 08sainsmart
SainSmart 5 Axis Breakout Board for Stepper Motor Driver CNC Mill
Free ShippingMain highlights- The two-stage signal processing, signal transmission smooth, powerful anti-jamming
- The maximum matching 5-axis stepper motor driver
- Relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etc
- Five-axis job LED display, visual display products, working condition
- 5 input interface to define the emergency stop, limit, points in the knife, etc.
9.1Excellent
Show more
- 09MakerHawk
2PCS Stepper Motor Driver Controller for Nema 17, 23, 14,TB6600 CNC Controller 4A 32 High Subdivision Suitable for 42/57/86 Stepper Motors
Main highlights- Wide Voltage Range and Current Limit：This driver can handle dynamic voltages from 9V to 42V and a maximum current of less than 4A. It’s compatible with two-phase and four-phase (4-wire, 6-wire, 8-wire) stepper motors
- Versatile Applications：Suitable for various small to medium-sized automation devices equipped with CNC controllers, such as X-Y-Z workbenches, label printers, laser cutters, engraving machines, and pick-and-place systems
- Optimized for NEMA 17 and NEMA 23 Motors：Specifically designed to drive NEMA 17 and NEMA 23 stepper motors efficiently
- High Subdivision and Enhanced Performance：The TB6600 stepper motor driver is an upgraded version with a plastic cover. It supports up to 32 subdivisions, making it ideal for high-precision applications
- Boost Your Automation Projects：Whether you’re building a 3D printer, CNC router, or any other precision machinery, the TB6600 driver ensures smooth motion and precise control
9.0Excellent
Show more
- 10MECCANIXITY
MECCANIXITY Stepper Motor Drivers, 4 Pack 4A Stepper Driver Controller CNC Digital Micro Step Driver for 39/42/57 Stepper Motor
Free ShippingMain highlights- The semi-flow functionality: The semi-flow function is a step of 200ms, and the driver output current is automatically reduced to the rated output current of 50%, used to prevent motor heating.
- Protect Form: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, voltage protection, preventing reverse.
- Parameter: Input voltage: 9~42VDC; Output Current: 0.5A~4.0A; Segment Optional: 1/2/4/8/6/32 Segment; Suitable for Step Motor: 39,42,57mm Stepper Motor
- Installation: Around to have 20mm of space, can not be placed next to the other heating equipment, to avoid dust, oil mist, corrosive gases, and high humidity is too big and strong vibration.
- Application: Suitable for any small and medium automatic equipment with CNC controllers, such as X-Y-Z tables, labeling machines, engraving machines, and pick-place devices.
8.8Very Good
Show more
