10 Best anycubic printer in Canada

Advertising Disclosure

Last Updated - 2024/05/05

Best Choice
01

ANYCUBIC

Show more

On Amazon

Anycubic Kobra 2 Max 3D Printer, 88L Large Printing Volume 500mm/s High-Speed Printing with Auto Leveling Vibration Compensation Flow Control Enhanced Print Quality & Detail,500 x 420 x 420mm
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【Smart and Easy to Use】 With the new Anycubic APP(Upgrade the printer firmware to version 3.0.5 and above), you can connect remotely, upgrade firmware, and view the printer's status in real time. The upcoming updates will enable online slicing and printing, video monitoring and time-lapse photography, remote control（Additional camera purchase required）and management, and even an open model library function module. Get ready to embark on a "smart" mobile experience!
【New Structure】 By using direct extruder and a dual-motor dual-Z-axis motion structure that have been perfectly optimized for the extrusion and cooling systems, it efficiently and accurately delivers materials, allowing for quick melting and cooling. This leads to smooth operation and fewer visible layer lines.
【LeviQ 2.0 Auto Leveling Smart Z-Offset】 By designing a unique module, it can intelligently compensate for Z-axis offset, while also supporting custom Z-axis compensation values, meeting the needs of different users and usage environments.
【Large Build Size】 Anycubic Kobra 2 Max 3D Printer comes with a large build volume of 19.7 x 16.5 x 16.5in./ 500 x 420 x 420mm (HWD), capable of printing models with a volume of around 88 liters in one go.
【High Power Powerful Computing】Equipped with a high-performance Cortex-A7 1.2GHz processor, it provides strong computing power for faster calculations, execution of commands motor control, resulting in 10 times faster printing.
【Firmware Upgrade】Upgrade the firmware of Anycubic Kobra 2 Max to 3.0.5, please refer to "Product guides and documents" below for upgrades
【10X Faster Excellent in Detail】 Compared to mainstream FDM 3D printers, the printing speed is increased by 10 times. The maximum printing speed up to 500mm/s. Recommended print speed is 300mm/s. Full-sized printing of the same model, compared to similar products on the market with a printing speed of 50mm/s, printing time is shortened by 77 h 42 min.

CA$999.99
02

ANYCUBIC

Show more

On Amazon

Anycubic Kobra 2 Max,Large FDM 3D Printer with 500mm/s High Speed Printing,20000mm/S²Acceleration,LeviQ 2.0 Auto Leveling,High Precision,WiFi,Intelligent APP Control,Extra Large Volume-420x420x500mm
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

[Super Large Printing Volume] The printing size of Anycubic Kobra 2 Max is: 420*420*500mm/88 liters, enabling ultra-large-volume printing. Meet the printing needs of various roll models.
[SMART APP CONTROL] After upgrading the printer firmware to version 3.0.5 or above, the Anycubic APP offers support for various features, including online model library search, real-time video supervision and status monitoring, online slicing and printing, time-lapse recording, as well as remote control and management. Anycubic Kobra 2 Max was also recommended by CBSNews as“Best 3D printer for beginners”.
[Print Quality Enhancement] Achieve flawless prints with one-click vibration compensation. An accelerometer module detects resonance frequencies in the X/Y-axis, enabling intelligent adjustments to eliminate artifacts, ensuring printing precision and stability.Anycubic Kobra 2 Max 3D Printer uses "flow control" for intelligent retraction compensation, ensuring uniform and solid layer printing, enhancing print quality and fine detail representation.
[Precision & Performance Boost]Anycubic Kobra 2 Max 3D Printer, powered by a Cortex-A7 1.2GHz CPU, offers advanced precision. Its rapid short-range extrusion mechanism controls flexible materials precisely, while optimized extruder airflow and high-speed fans dissipate heat and reduce layer artifacts. The stable motion structure includes X/Y-axis metal dual-shaft cores, SG15 bearing motion, and dual-motor Z-axis lead screws for faster, stable prints.
[500mm/s print Speed and 20000mm/S²] Anycubic Kobra 2 Max has a maximum print speed of 500mm/s, recommended print speed of -300mm/s and maximum acceleration of -20,000mm /S². It can complete a Benchy boat in just 18 minutes, saving an impressive 83% of printing time.

CA$999.99
03

ANYCUBIC
11% Off

Show more

On Amazon

ANYCUBIC Photon Mono 2, Resin 3D Printer with 6.6'' 4K + LCD Monochrome Screen, Upgraded LighTurbo Matrix with High-Precision Printing, Enlarge Print Volume 5.6'' x 3.5'' x 6.5'' / 143x89x165mm
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【Warranty】 ① ANYCUBIC Photon Mono 2 3d printer provides one-year warranty and lifelong technical support.Tips:The shelf life of the screen is six months
【Upgraded LighTurbo Matrix】The upgraded LighTurbo matrix provides a stable and uniform parallel light source, thus effectively reducing the layer lines and eliminating grid lines. Therefore, Photon Mono 2 can make the model details more vivid and make the model surface delicate and smooth.
【New Version Slicing Software】Photon workshop 3.0 has enhanced and upgraded core features such as slicing, punching, support adding, shells extracting, and model arrangement. It has a more straightforward slicing process and a new UI interface that is easier to operate.
【Larger Build Volume】The machine Size of Photon Mono 2 is 235 x 229 x 390 mm / 9.25’’ x 9.01’’ x 15.4’’ which is nearly the same as Photon Mono 4K, but it has a larger print volume, up to 143x89x165mm / 5.6’’ x 3.5’’ x 6.5’’ / 2.09L.
【High Printing Success Rate】Photon Mono 2 adopts laser engraved platform. It has excellent flatness, which can increase model adhesion and greatly improve printing success rate. And the ultra-large scratch-resistant screen protector helps to prevent screen scratches and resin penetration.
【6.6’’ 4K+ HD screen】ANYCUBIC Photon Mono 2 uses a 6.6-inch monochrome LCD screen with a resolution of 4096*2560, which can display the models’ tiny details. The First Choice for Resin 3D Printing Beginner.

CA$319.99 CA$359.99 11% Off
Best Value
04

ANYCUBIC
24% Off

Show more

On Amazon

ANYCUBIC 3D Printer Kobra 2 Neo, 250mm/s Max Print Speed FDM 3D Printer Auto-Leveling,Smart Z-Offset Upgraded Kobra Neo with New Integrated Extruder, Easy Assembly for Beginners 220 * 220 * 250mm
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

📌【Upgraded LeviQ 2.0】Kobra 2 Neo with the design of a unique module, the Z-axis offset is intelligently compensated after automatic leveling, and the Z-axis compensation value is supported to meet the needs of different users and usage scenarios, so as to start creation efficiently and easily, and also for novices.
📌【New Integrated Extruder】The newly upgraded extrusion system and cooling system melt filaments quickly through the 60W hot end. At the same time, it is equipped with a 7000 rpm cooling fan to ensure rapid cooling and molding of the model.Anycubic Kobra 2 Neo compatible with PLA, TPU, PETG and other types of filaments, it can be used in a wider range of fields and industries to meet the creative needs of more scenarios.
📌【Details Even Better】Apply the linear propulsion and input shaping functions in Marlin firmware to reduce spillage and print resonance, improve print quality and stability, and create smoother and clearer model details. Novices can also produce high-quality works for their first print.
📌【All-in-one Structure】:The Kobra 2 Neo consists of 5 modules with a gantry frame structure design. Easy assembly and less maintenance for a fast printing experience.
📌【5X High-Speed】More than 65% shorter time when printing the same model. The Maximum Print Speed is 250mm/s. Recommended print speed is 150mm/s ensures a perfect blend of precision and performance, empowering you to bring your ideas to life with unparalleled speed and accuracy.
📌【100% Satisfaction Service】: Each Anycubic Kobra 2 Neo 3D Printer comes with a one-year warranty (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. We also provide the lifetime technical support and 24 hours professional customer service.

CA$249.00 CA$329.99 24% Off
05

ANYCUBIC
23% Off

Show more

On Amazon

Anycubic Kobra 2 Pro 3D Printer, 500mm/s High-Speed Printing, High Power Powerful Computing New Structure, Upgraded LeviQ 2.0 Auto Leveling Smart Z-Offset, Print Size 220 * 220 * 250mm
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【Smooth and Detailed】One-click vibration compensation, by detecting the resonance frequency of the X/Y axis, smart adjustments are made to motion control, effectively eliminating resonance vertical lines and bracket lines, ensuring printing accuracy and stability.
【LeviQ 2.0 Auto Leveling Smart Z-Offset】By designing a unique module, it can intelligently compensate for Z-axis offset, while also supporting custom Z-axis compensation values, meeting the needs of different users and usage environments.
【High Power Powerful Computing】Equipped with a high-performance Cortex-A7 1.2Ghz processor, providing abundant computing power for faster calculation and command execution, which results in 10x faster printing.
【Firmware Upgrade】Upgrade the firmware of Anycubic Kobra 2 Pro to 3.0.5, please refer to "Product guides and documents" below for upgrades.
【Brand New Structure】By utilizing an optimized direct extruder and a movement structure in the extrusion system and cooling system, it can effectively and precisely deliver the filament, quickly melt and cool to form, and run smoothly to reduce layer lines.
【10X Boost in Speed】Compared to mainstream FDM 3D printers, the printing speed is increased by 10 times. The maximum printing speed up to 500mm/s. Recommended print speed is 300mm/s.

CA$399.00 CA$519.00 23% Off
06

ANYCUBIC

Show more

On Amazon

ANYCUBIC Photon Mono M5s 12K Resin 3D Printer, with Smart Leveling-Free, 3X Faster Printing Speed, 10.1" Mono LCD Screen, Larger Print Size 7.87" x 8.58" x 4.84", 3D Printer Add The High-Speed Resin
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

[Upgraded Slicer Software] The new "Intelligent Mode" in Anycubic Photon workshop 3.1 can match exposure parameters according to model details and dimensions. And the new support algorithm further improve the printing stability and success rate, realizing one-click repair of damaged models, improve the speed of both punching and slicing. lf the file was sliced in high-speed mode, please use high-speed resin for printing. Otherwise, printing will fail.
[Leveling Free & Ready to Use] lt adopts an brand new leveling-free solution that through the floating platform technology and internal sensors, will make necessary adjustments to ensure that the print is uniform and falls within an acceptable range to achieve a better result.
[Large Build Volume] The larger print size of 7.87" x 8.58" x 4.84" allows you to easily print larger objects or multiple smaller models at the same time to increase your productivity.
[Intelligent and Efficient] Before printing, the automatic equipment check and resin detection functions are utilized to check the operating status of the exposure screen, mechanical detection module and motor as well as whether the amount of resin meets the needs to help start printing smoothly. In addition, the print status inspection reports and analyzes common bottom-leakage printing faults to improve printing efficiency.
[3X Faster Printing Speed] The Photon Mono M5s uses Anycubic high-speed resin to achieve an average printing speed of 105mm/h* and is equipped with a high-speed release film that reduces the force of the release and increases speed.
[12K Exquisite Details] Anycubic Photon Mono M5s has a 10.1 inch 12K monochrome LCD screen with a resolution of 11520*5120, achieving an X accuracy of 19 microns. It can print with exceptional detail, as fine as a human hair. The contrast ratio is 480:1, making models have sharp edges and distinct contours.

CA$915.99
07

ANYCUBIC

Show more

On Amazon

ANYCUBIC 3D Printer Kobra 2 Plus, 10X Faster 500mm/s High-Speed Printing with Dual Z-Axis New Structure APP Intelligent Control Large 3D Printer Upgraded Auto Leveling, Large Size 320 * 320 * 400mm
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【VIBRATION COMPENSATION & FLOW CONTROL】The one-click "Vibration Compensation" detects the resonance frequency of the X/Y axes and adjusts the motion control intelligently to effectively eliminate resonance vertical lines and bracket lines, ensuring printing accuracy and stability. With "Flow Control", intelligent compensation for retraction and refilling ensures evenly and fully printed layers, enhancing print quality and detail representation.
【SMART APP CONTROL】With the new version of Anycubic APP remote networking firmware upgrading (Upgrade the printer firmware to version 3.0.5 and above), and real-time viewing of printer status are achievable. Future updates will also support online slicinc and printing, video monitoring and time-lapse photography remote control and management (Additional camera purchase required) , and an open model library function module, kick-starting a "smart".
【OPTIMIZED CONFIGURATION】By using direct extruder and a dual-motor dual-Z-axis motion structure that have been perfectly optimized for the extrusion and cooling systems, it efficiently and accurately delivers materials, allowing for quick melting and cooling. This leads to smooth operation and fewer visible layer lines.
【Firmware Upgrade】Upgrade the firmware of Anycubic Kobra 2 Plus to 3.0.5, please refer to "Product guides and documents" below for upgrades.
【Excellent Customer Service】 Each Anycubic Kobra 2 Plus 3D Printer comes with a one-year warranty (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach us at amazonsupport@anycubic.com
【EFFORTLESS AUTO-LEVELING】By designing a unique module, after automatic leveling, it can intelligently compensate for Z-axis offset, while also supporting custom Z-axis compensation values, meeting the needs of different users and usage environments. One-click quick start for creative ideas, ensuring successful printing.
【500MM/S HIGH-SPEED PRINTING】Anycubic Kobra 2 Plus 3D printer is designed for efficiency, boasting a max speed of 500mm/s and 10000mm/s² Acceleration, recommended print speed is 300mm/s, which is 10 times faster than a regular FDM 3D printer. Perfect for professionals and beginners.
【12.6x12.6x15.7in LARGE PRINTING SIZE】Anycubic Kobra 2 Plus boasts an impressive printing size of 320*320*400mm/12.6 x 12.6 x 15.7inch, can print models of approximately 41 liters in volume at one time. Full-sized printing of the same model, compared to similar products on the market with a printing speed of 50mm/s, printing time is shortened by 31 h 35 mins, efficient creation, energy-saving, and environmental-friendly.

CA$799.99
08

ANYCUBIC

Show more

On Amazon

Anycubic Kobra 3D Printer, Auto Leveling 3D Printer with 25-Point Precise Leveling and Self-Developed Direct Extruder Compatible with PLA/ABS/PETG/TPU Flexible Filament 220 * 220 * 250mm
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

📌Ultra Smooth Printing: ANYCUBIC KOBRA adopts the self-developed Direct drive extruder, providing greater conveying force and preciser filament control. It minimizes jitter in filament transmission and ensures printing precision. Compatible with PLA/ABS/PETG/TPU flexible filament.
📌Removable Spring Steel Platform: The innovative printing platform is a combination of a PEI coating, a spring steel plate and a magnetic sticker. The PEI coating brings good adhesion and printed models can be removed by bending the plate easily. It not only solves the problem that the printed product cannot be removed from the printing heated bed, but also saves your time and cost greatly.
📌Quicker to start & Printing without limitations: Adopts modular design, ANYCUBIC KOBRA will be assembled only in 10 minutes, only takes 4 steps to complete the installation out of the box. 8.7x8.7x9.84" / 220x220x250mm printing size is enough for DIY Home School using, providing you larger printing space and more choices of creation.
📌One-click Auto-Leveling: ANYCUBIC KOBRA 3D printer adopts the self-developed Anycubic LeviQ Leveling system, just one click on the screen to achieve 25-point automatic adjustment of the unevenness of the heated bed, providing you with a more intelligen printing experience.

CA$359.99
09

Makacces

Show more

On Amazon

3D Printer Enclosure with Smoke Vent&LED Light, Laser Engraver Eye Protective Shield Cover Resin 3D Printer Fireproof Tent,for Ender 3/Ender 3 Pro/3 V2,CR-10,Aquila Mega-S, LCD Printers,25x21x29.5”
8.4

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

【Light Filter Sheet】We also provide a brown color filter sheet to attach to the view window. In case some users need to do laser engravings or protect their resin printers from ultraviolet light. The user needs to stick the white sticky Velcro to the film and attach the film to the view window to use it.
【Fireproof 3D Printer Enclosure】 Fireproof and waterproof fabrics, 635*535*750mm Size, 5-minute Quick installation, High-quality Stainless Steel Frame. Compatible with most small and medium-size 3D printers.
【Convenient Front Cable Ports】We add on two front small ports for those who want to move their control panel outside of the cover or add more cables to the printer. They are sealed by default and the user needs to cut them through when he or she wants to use them.
【5W LED Light Bar】5W LED Light Bar with USB Plugin (charge is not included). This light bar is able to attach to your 3D printer or the enclosure Frame, Depending on what type of holder you want to use (print). We provide some designs (STL) for future updates. But you are welcome to design and print your own parts.
【3D Printer Cover with 3-Inch Exhaust Pipe Kit】Built-in a preassembled vent kit along with the 3d printer enclosure. Attach the port of the pipe kit to one of the pockets on the side of the section, and the ventilation system is activated. (Fan is not included in this box. We provide fan adapter STL. The users need to choose to print it and buy their desired fan).

CA$99.00
10

ANYCUBIC
28% Off

Show more

On Amazon

ANYCUBIC Wash and Cure Station, Larger Volume 2 in 1 Wash and Cure 3.0 Machine for LCD SLA DLP 3D Printer Models with Gooseneck Light, UV Rotary Cleaning Curing Resin Box Washing Size:165 x 100 x180mm
8.3

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

[Larger Capacity] Compared to the Anycubic Wash & Cure 2.0, the cleaning basket capacity of the Wash and Cure 3.0 has been increased by an impressive 100%, which makes it perfectly suited for LCD (light curing) 3D printers measuring 7.3 inches or less. The cleaning bucket capacity has also been increased to 4L to cater for cleaning of larger and more numerous 3D models.
[Gooseneck Light Design] ANYCUBIC's "Innovative Flexicure Gooseneck Light Design" delivers an increased energy value of 30,000uW/cm² over a 1-3cm irradiation range, which dramatically enhances the curing of fine areas such as the top of the model and the hem of the garment.
[Enhanced Curing Capability] By utilising a new lamp bead arrangement and lens light source, Wash & Cure 3.0 offers a 20% improvement in curing uniformity over the previous generation 2.0. This results in more thorough and comprehensive curing of the entire model.
[Easy To Use and Quiet] Cleaning and curing dual modes can be easily selected with one button; Gooseneck lamp curing mode can be easily switched on and off with one button. 1 to 30 minutes can be adjusted arbitrarily. Through the closed structure design and software optimisation, the machine can effectively reduce the cleaning and curing noise interference, creating a quieter and more comfortable working environment.
[Dual-Layer Design, IPA Saving] The double-layered PP material cleaning basket is designed to support simultaneous cleaning with the platform. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design also maximizes the efficiency of IPA usage.

CA$142.99 CA$199.99 28% Off