Advertising Disclosure
10 Best ads b receiver in Canada
Best Choice01NooElecNooElec Dual-Band NESDR Nano 3 Premium ADS-B (978MHz UAT & 1090MHz 1090ES) Bundle for Stratux, Avare, Foreflight, FlightAware & Other Applications. Includes 2 SDRs, 4 Antennas, 5 Adapters.
Free ShippingMain highlights- The NESDR Nano 3 SDRs utilize a high-quality 0.5PPM TCXO. This ensures tuning stability, even in extreme conditions
- The NESDR Nano 3 SDRs are installed in aluminum enclosures to greatly reduce EMI, improve performance, and facilitate heat transfer from the PCB to the exterior of the device
- The NESDR Nano 3 SDR was designed to eliminate issues with USB port occlusion. You can install the SDRs side-by-side and back-to-back in nearly any portable/embedded device, like the Raspberry Pi 3, without the use of USB extension cables, removal of the SDR PCB from the enclosure, or other such hacks
- Designed & assembled by NooElec in the United States. Full 2-year warranty on all bundle components
- Bundle includes 4 ADS-B antennas, 3 RF cables, 2 RF adapters, 2 optional heatsinks, and 2 NESDR Nano 3 SDRs. Each SDR is lab-calibrated and EEPROM-programmed for simple Stratux setup
9.9Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02NooElec
Nooelec SAWbird+ ADS-B: Premium, Dual-Channel, Cascaded Ultra-Low Noise Amplifier (LNA) & Filter Module for Airplane Tracking Applications. 1090MHz (ADSB) and 978MHz (UAT) Center Frequencies
Free ShippingMain highlights- Your purchase includes a fully assembled SAWbird+ ADS-B module pre-installed into a beautiful black custom aluminum enclosure, two male to male SMA adapters, and a micro USB to DC barrel connector adapter cable
- This product is designed to massively increase plane tracking signal strength (SNR) compared to competing products. Drastically outperforms all available, low-cost ADS-B amplifiers and filters!
- SAWbird+ ADS-B increases SNR, and therefore signal range, by providing an industry lowest-in-class noise figure (0.9dB or lower) and substantial gain (34dB or higher) for BOTH ADS-B and UAT applications
- Proudly made in North America, ensuring exceptional quality and reliability. Backed by a generous 2-year warranty for peace of mind
- NOTE: Like any other amplifier, you MUST LOWER YOUR GAIN LEVELS AND/OR REMOVE OTHER AMPLIFIERS IN YOUR SIGNAL CHAIN to see the resulting reception increase! Otherwise, you WILL OVERLOAD YOUR RADIO, RESULTING IN REDUCED OR ZERO RECEPTION! When set up as intended, SAWbird+ ADS-B will greatly increase the performance of nearly every flight tracking setup
- For more information review the product page or datasheet: https://www.nooelec.com/datasheets/100847
- Exceptional out-of-band rejection levels of +85dB for cleaner signals
- Both sides of the device offer a bias tee power option (3 to 5V DC and 140mA or higher current availability). Alternatively, a micro USB port is available to provide external power when bias tee power is unavailable or unsuitable
- 50Ω matched input/output for optimal signal transfer
9.8Exceptional
Show more
Value for Money03AirNav RadarBoxAirNav RadarBox FlightStick - Advanced USB ADS-B Receiver
Free ShippingMain highlights- Works with Raspberry Pi.
- Integrated 1090 MHz Band Pass Filter and ESD protection.
- 20.5dBi in-built Amplifier that guarantees 25-100% increased range.
9.6Exceptional
Show more
- 04ADSBexchange.com
ADSBexchange.com RTL2832U-based ADS-B SDR w/Amp and 1090 Mhz Filter & Software on Industrial MicroSD
Main highlights- Similar in performance/function to another popular "blue" filtered SDR receiver.
- Onboard 1090 Mhz filter and amplifier included to bring in ADS-B signals further than generic SDRs
- Industrial grade microSD card, -25 to 85 degree C operating temperature range, Advanced memory management firmware with power immunity, auto manual read refresh, wear leveling, and ECC, health meter status, programmable ID, secure FFU, Dynamic Bit Flip Protection, plus much more to ensure reliability for years in challenging conditions
- Aluminum SDR case for effective heat dissipation
- Add a Raspberry Pi 4, USB-C Power Supply, and antenna/cable to complete your ADS-B receiver station!
- 8gb Sandisk Industrial microSD card containing the ADSBexchange.com feeder software
9.4Excellent
Show more
- 05AirNav RadarBox
AirNav ADS-B 1090 MHz Outdoor Antenna with SMA Connector and RadarBox FlightStick Bundle
Free ShippingMain highlights- Weatherproof. Built with Fiberglass & Aluminum Alloy. Guaranteed 50-100 nm range improvement.
- Integrated 1090 MHz Band Pass Filter and ESD protection.
- High performance ADS-B 1090 MHz Vertical Antenna with SMA connector & 30 ft cable.
- Gain 7dBi, Impedance 50Ω±5Ω, Vertical Polarization
- Compatible with Raspberry Pi and Windows PC.
- BUNDLE OFFER! Save 20% with this FlightStick + Antenna bundle.
- 66 cm / 26 inch Vertical Antenna. Mounting bracket included.
- 20.5dB in-built Amplifier that guarantees 25-100% increased range.
9.3Excellent
Show more
- 06AirNav RadarBox
AirNav Radar ADS-B 1090 MHz Outdoor Antenna with SMA Connector
Free ShippingMain highlights- Mounting bracket and 30 feet co-axial cable included.
- High performance ADS-B 1090 MHz Vertical Antenna with SMA connector.
- Guaranteed 50-100 nm range improvement. Tested in extreme weather conditions.
- Gain 7dBi, Impedance 50Ω±5Ω, Vertical Polarization
- Built with fiberglass & aluminum alloy for both indoor/outdoor use.
- 66 cm / 26 inch Vertical Antenna.
9.2Excellent
Show more
- 07NooElec
NooElec NESDR Mini USB RTL-SDR & ADS-B Receiver Set, RTL2832U & R820T Tuner, MCX Input. Low-Cost Software Defined Radio Compatible with Many SDR Software Packages. R820T Tuner & ESD-Safe Antenna Input
Free ShippingMain highlights- Software may be downloaded freely from nooelec.com
- RTL2832U interface IC & R820T tuner IC on USB dongle
- Included: Nooelec USB dongle & antenna
- Compatibility with SDR software packages
- All purchases from Nooelec include installation support if needed
9.1Excellent
Show more
- 08AirNav RadarBox
AirNav Radar 1090 MHz ADS-B Filter
Free ShippingMain highlights- Optimizes 1090 MHz ADS-B Reception.
- Male-Female ADS-B connectors. Reduced signal loss.
- Guaranteed range improvement. Substantially reduces interference and noise.
- Compatible with any ADS-B receiver that has an SMA connector.
- An essential add-on for those with ADS-B tracking equipment near a cellphone or communication tower.
8.9Very Good
Show more
- 09AirNav RadarBox
AirNav ADS-B 1090 MHz XBoost Antenna with SMA Connector
Free ShippingMain highlights- Suitable for indoor/outdoor use. Wall clamp, steel sleeve and cable ties included for mounting.
- Portable, compact & lightweight. Works with Radarbox and other ADS-B receivers.
- Optimized for long and short range ADS-B reception.
- 6 dB gain. Guaranteed range improvement.
- 1090 MHz Antenna with SMA connector.
8.8Very Good
Show more
- 10SIGNALPLUS
ADS-B Flightaware 1090MHz Antenna 5.5dBi for Aviation ADS-B Receiver RTL SDR Software Defined Radio USB Stick Dongle Tuner Receiver
Free ShippingMain highlights- if need the lighting arrest and the LMR400 cable or other antenna,you can enter my store and order.
- Use skills:Any antenna is heavily dependent on the surroundings.To achieve better results you may have to move around your hotspot and antenna（height and location of the installation）until you determine a sweet spot that gives you the best rewards.You must take into considerations, antenna hight, location,building clearance, line of sight,etc.
- Suit for radio dongles ADS-B DVB-T DVBT Defined Radios SDRs USB flightaware pro stick NooElec NESDR SMArt - Premium NooElec RTL-SDR stic Aluminum Enclosure and Flight Radar 24.Works with Raspberry Pi and Windows PC.
- Power:the 1090mhz antenna does not require power,it is just plug and play ,don't need any setting up.
- Packing Listing : 1x1090mhz flightaware Antenna & 1X5 meter of SMA RG58 Cable & 1set hardware (u-bolts, nuts, washers, lock washers).
- Material ：(antirust) the antenna is made of fiberglass. The antenna structure inside is made of copper.The copper (element) tube is better than the circuit board. The copper (element) tube enables the antenna to obtain lower VSWR and withstand higher power.
- Lightning arester:If you need to mount the antenna on a roof or very high, and you are in a lightning-prone area, it is recommended to install a lightning arrester.if you need you can buy it in my Amazon store.
- Frequency :1090MHz.High Gain :5.5dbi .Length :60cm.Antenna Connector :N female& 16.5ft SMA male RG58 Cable.
- Dimensions of the mount :The mount fits poles whose diameter between 35mm and 50 mm.(as the picture )
- Buy this antenna to improve your ADS-B signal. You can see more planes at a greater distance.
8.7Very Good
Show more
