Advertising Disclosure
10 Best 3d printer extruders in Canada
Best Choice01CrealityOfficial Creality Ender 3 Direct Drive Extruder Upgrade Kit with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, Compatible with Ender 3 Pro/Ender 3 V2 3D Printer
Main highlights- Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments.
- 3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament
9.8Exceptional
Show more
- Curious about how we select the top products for you? Explore How It Works
- 02Redrex
Redrex Dual Gear Ender 3 Extruder with Nema 17 Stepper Motor Compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 7,CR6 SE,CR10 3D Printers
Main highlights- 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,please print the model to rise up the filament detector to make them at the same height;
- 【High Torque Motor】The Nema 17 stepper motor provides 1A 40Ncm/57g.cm^2 in holding torque which helps to improve the motor's stability.Notice:for Non-Creality users,please swap the motor wire sequence to make it turn forward instead of reverse
- 【Double Gear Extrusion Mechanism】The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- 【Application】This all metal dual drive extruder with motor kit is compatible with Ender 3,Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 5 Pro,Ender 5 Plus,CR10 Serie,Voxelab Aquila 3D printer.
9.7Exceptional
Show more
Value for Money03RedrexRedrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with Creality Ender 3 V2 Pro,Ender 3 Neo Series,CR10 3D Printer TPU Filament Supported(Motor Shaft>21.5mm)
20% OffMain highlights- 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- 【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue.
- 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height;for Vyper users,please swap the motor wire sequence to make it turn forward instead of reverse
- 【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- 【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,CR10 S series 3D printer.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.
9.6Exceptional
Show more
- 04Sovol
Ender 3 V2 CR-10 Extruder Upgraded Aluminum Metal MK8 Bowden Extruder 40 Teeth Drive Gear for Creality 3D Printer Ender 3 Ender 3 Pro,Ender 5,CR-10 Series
Main highlights- The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
- It works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder.
- Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install.
- Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
- 100% brand new and original Creality exturder. If you have any question, please feel free to contact us.
9.5Excellent
Show more
- 05VAKUUM
Upgrade Dual Gear Extruder, Dual Driver Stock Feeder All Metal 1.75MM Filament MK8 Extruder Kit for Ender 3/Ender3 V2/Ender 3 Neo/Max Neo/Ender5/Plus/CR10S Pro/CR10S/CR10/CR6 SE 3D Printer
Main highlights- Upgraded Dual Extruder: Dual gears and dual pneumatic combined extrusion structure, large extrusion force, enhanced feeding intensity, ensuring smooth feeding. The double gear rotation design locks the filament, which is beneficial to improve printing quality and reduce filament slipping, high-speed extrusion or retraction, better pressure to push the filament into the printer, less easy to lose steps, faster printing speed
- Stable and Durable: All metal aluminum alloy, high quality double gear extrusion, compared with ordinary plastic drive, this high aluminum metal filament extruder is stable and durable. The idler gear has been upgraded with a brass washer added between the stainless steel gear and the aluminum housing, so the gear does not collide seriously with the housing, which helps reduce stock extruder wear.
- Imported Materials: The 3d printer dual extruder material is made of brand new imported aviation aluminum material and processed by CNC imported from Japan. The kit does not include the stepper motor, motor bracket and instructions, we need to make them ourselves. If you need some installation help, there are video introductions online, and you can seek our technical help at any time.
- Compatibility: Double gear mk8 extruder, perfect replacement for 3D printer CR-10/ CR-10S/ CR-10S Pro/ Ender 3 (initial version)/Ender 3 v2/Ender 3 pro/Ender 3 Neo/Max Neo/Ender 5/Plus/CR6 SE/Tornado, etc. 1.75 mm filament (Set only for 3D printers with motor shafts exceeding 20mm, please measure the shaft length before placing an order.)
- Adjustable Spring: The tension of the extrusion spring can be adjusted by tightening the screw, which greatly improves printing accuracy and paper feeding problems. Strong extrusion end spring enhances feeding strength and ensures stable pushing of filaments into the hot end of the printer. Suitable for most types of filament, such as ABS, PLA, TPU, PTEG etc.
9.4Excellent
Show more
- 06VAKUUM
Upgrade Dual Gear Extruder, Dual Driver Stock Feeder All Metal 1.75MM Filament MK8 Extruder Kit for Ender 3/Ender3 V2/Ender 3 Neo/Max Neo/Ender5/Plus/CR10S Pro/CR10S/CR10/CR6 SE 3D Printer
Main highlights- Upgraded Dual Extruder: Dual gears and dual pneumatic combined extrusion structure, large extrusion force, enhanced feeding intensity, ensuring smooth feeding. The double gear rotation design locks the filament, which is beneficial to improve printing quality and reduce filament slipping, high-speed extrusion or retraction, better pressure to push the filament into the printer, less easy to lose steps, faster printing speed
- Stable and Durable: All metal aluminum alloy, high quality double gear extrusion, compared with ordinary plastic drive, this high aluminum metal filament extruder is stable and durable. The idler gear has been upgraded with a brass washer added between the stainless steel gear and the aluminum housing, so the gear does not collide seriously with the housing, which helps reduce stock extruder wear.
- Imported Materials: The 3d printer dual extruder material is made of brand new imported aviation aluminum material and processed by CNC imported from Japan. The kit does not include the stepper motor, motor bracket and instructions, we need to make them ourselves. If you need some installation help, there are video introductions online, and you can seek our technical help at any time.
- Compatibility: Double gear mk8 extruder, perfect replacement for 3D printer CR-10/ CR-10S/ CR-10S Pro/ Ender 3 (initial version)/Ender 3 v2/Ender 3 pro/Ender 3 Neo/Max Neo/Ender 5/Plus/CR6 SE/Tornado, etc. 1.75 mm filament (Set only for 3D printers with motor shafts exceeding 20mm, please measure the shaft length before placing an order.)
- Adjustable Spring: The tension of the extrusion spring can be adjusted by tightening the screw, which greatly improves printing accuracy and paper feeding problems. Strong extrusion end spring enhances feeding strength and ensures stable pushing of filaments into the hot end of the printer. Suitable for most types of filament, such as ABS, PLA, TPU, PTEG etc.
9.3Excellent
Show more
- 07Creality
Creality Official Ender 3 Extruder Upgrade Metal Drive Feeder 3D Printer Parts for Ender-3 Pro/3S/3 V2/3 Max CR-10/10S Gray Aluminum 1.75mm Filament Extruder
23% Off9.2Excellent
Show more
- 08Creality
Creality Official Ender 3 Extruder Upgrade Metal Drive Feeder 3D Printer Parts for Ender-3 Pro/3S/3 V2/3 Max CR-10/10S Gray Aluminum 1.75mm Filament Extruder
19% Off9.1Excellent
Show more
- 09Ruikarhop
Ender 3/Ender 3 Pro 24V 3D Printer Extruder Assembled MK8 Hot End,1.75mm, 0.4mm Nozzle
Main highlights- Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
- With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect.
- Material: Aluminum & Stainless Steel & Brass,Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
- Installation type:External thread connection.Thermistor and heater cable length: 1M
- 100% original and high quality 3D Printer accessories for Ender 3 Series.
9.0Excellent
Show more
- 10GBA-SZC
GBA-SZC Titan Extruder, Mega s/x Extruder,3D Printer Stock Feeder Compatible with V5/V6 Hotend,J-Head Hotend, CR10,Ender 3 Series Mega S X Series,1.75mm Filament.
Main highlights- This extruder upgrades kits provides a short,well constrained filament path,which will contribute to avoid filament bending,buckling or jamming.
- This Ender 3/CR10 series upgrades extruder has higher transmission ratio than other extruder.Transmission Ratio: 3:1
- Strong compatibility (can be used with all 1.75mm filaments on the market, and above all optimized the performance of remote printing with the flexible filament such as the TPU)
- NOTE:Please pay attention to stepper cable wiring,and update the E-step Value to around 385
- For gear reduction, the engine is light and light, but with excellent torque and resolution. Feeding speed is more stable to improve print quality and effectively reduce overall weight.
8.8Very Good
Show more
